Instructions

31
8. USING THE KODAK PPS100 Pro
How to provide power for AC appliances with KODAK PPS100 Pro?
Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the
power button and the unit will start providing power to your appliances.
WARNING
AC outlets, AC voltage and frequencies are dierent in dierent countries.
Please carefully check whether the product speciications are consistent
with the appliance speciications before use.
Limited Appliance Wattage <80W.
Lamps, Electric Fans, TVs, etc.
AC will shutdown when it’s short circuited or
power overloaded. Remove the device and the
unit will recover from short-circuit or overpower
protection in a few seconds. Repress the AC out-
put button to switch on AC output again.
How to provide power for Type-C or USB devices with KODAK PPS100 Pro?
Connect the cable of your device to the Type-C or one of the 4 USB port of the KODAK PPS100 Pro. You
can even use dierent ports simultaneously.
NOTE
Some smart devices, such as Bluetooth headphones and LED lights require very small input
current to charge, which could be less than 150mA. The unit may fail to charge these kind of smart
devices due to detection current limitation by the USB output ports. If this happens,
press the AC button to keep the USB port output running.
Please turn o AC output when the smart devices are fully charged to save power.
Type-C