Operation Manual

25
With Panorama Mode, you can take a series of
pictures which will be stitched automatically into an
ultra-wide panoramic picture by the camera.
Follow the steps below:
1. Press button to select Panorama Mode ( ).
2. Use the Left/Right buttons to specify the direction
of picture taking, and then in 2 seconds the
panoramic sequence will commence automatically.
3. Composetherstviewofthepanoramicpicture
on the LCD screen and press the Shutter button to
capture the image.
Save
Cancel
Cancel Save
1/50F3.3
4. Aftertherstshotistaken,thesemi-transparent
imageoftherstshotwillappearattheedgeof
the screen. You can use this image to compose
your picture before you press the Shutter button to
captureandnishmanualstitching.
5. If continuous pictures are less than 4 shots,
press the button and the camera will stitch the
pictures automatically. Press the playback button
to enter playback mode to see the effect.
6. If you take 4 pictures, the camera will automatically
stitch the pictures. Press the playback button to
enter playback mode to see the effect.
Flash Mode, Self-timer, Macro Mode, and
Exposure Compensation are all disabled in
Panorama Mode.
In Montage mode, up to 4 photos can be
capturedwhentheimagesizeissetat2MP.
Panorama Mode