Operation Manual

36 3736
7. Turn the mode dial to switch to the custom
settings ( ).
8. The photo settings you stored the last time
are invoked.
When the mode is used for the first
time, there is no preset parameter stored
in the mode.
Under the mode, if you need to retain
or modify the set parameters (except
the parameters in ) in restart or
all modes. Please enter the 「Custom
Settings」menu and select 「Yes」after
setup. Otherwise, the parameter settings
are not retained in the case of switching
on/off or mode switching.
If you want to remove the parameter
setting of 「Custom Settings」, please
see the reset function on page 81 to
operate.
5. Press the down arrow button
select「Custom Settings」and press the
button or the right arrow button to enter
the menu.
6. Select「Ye s 」to save or「No」to cancel.