KODAK PIXPRO AZ401 DIGITAL CAMERA User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA Company Website: kodakpixpro.com For Customers in the U.S.A. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging.
SAFETY NOTES Safety Notes for this Camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to help prevent dust or sand from entering the camera, causing possible damage. Do not use or store the camera in a hot environment or in direct sunlight. Do not use or store the camera near powerful magnetic fields, such as a magnet or transformer. Avoid touching the lens of the camera.
Safety Notes for Batteries If battery fluid leaks inside the camera, contact our customer service department immediately. If battery fluid leaks onto your skin, rinse your skin immediately with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with your local (national or regional) regulations. To prevent batteries from being damaged, do not drop batteries or allow them to hit solid objects or to be scratched by foreign objects.
Safety Notes for Memory Cards We highly suggest buying only wellknown, name brand memory cards to ensure peak performance and reliability. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on.
Other Safety Notes Do not disconnect the power or turn the product off during the update process. Doing so may cause incorrect data to be written and the product may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline and FAA regulations. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
CONTENTS BEFORE YOU START................. 1 SAFETY NOTES........................3 Resetting Date/Time..................19 MODE OVERVIEW................. 20 Display Setting.................................20 CONTENTS...............................7 Overview of the Screen Icons in Photo Shooting Mode................21 GETTING READY......................11 LCD Screen Display..........................21 Accessories Included.......................11 Overview of the Screen Icons in Movie Mode............
Scene Mode.....................................31 Using Quick Recording....................46 Auto Scene (ASCN)....................33 “i” Button Function Menu.................47 Movie Mode .....................................34 Custom Settings ..............................35 BASIC OPERATION.................37 Using the Zoom Function................37 Focus Setting...................................38 Macro Mode.....................................39 Self-Timer Setting.............................
HDR (High Dynamic Range).......55 Digital Zoom...............................65 Face Beautifier...........................56 Custom Settings........................65 Scene..........................................56 Playback Menu.................................66 Photo Shooting Setting Menu.........58 Playback.....................................67 Quality........................................58 HDR (High Dynamic Range).......67 AF Assist Beam (Auto-Focus Assist Beam) .........................
Power Saver...............................77 Set Eye-Fi Card Connection Mode..85 Language....................................77 Supported HDMI Connections........86 World Time.................................77 Connecting HDMI-Ready TV......86 Date/Time...................................78 Connecting to a PICTBRIDGE™ Compatible Printer...........................87 LCD Brightness...........................78 Battery Type...............................78 File Settings..................................
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer or our customer service center.
Installing Lens Cap and Neck Strap 12
Part Names 1. Zoom Lever 4 56 7 8 9 10 2. Shutter Button 3 3. Strap Eyelet 4. Exposure Compensation Button 3 2 1 5. Continuous Shot Button 6. Power Switch 11 7. AF Assist Beam/Self-Timer Lamp 8. Mode Dial 12 9. Flash Lamp 13 10. Flash Button 11. Microphone 12. Speaker 13.
14. “i” Button 15. Indicator Lamp 14 15 16 17 16. Fast Video Recording Button 17. Menu Button 18. Micro USB Port 18 19 20 21 22 23 19. Micro HDMI Port 20. AF Button/Up Button 21. Flash Button/Right Button 22. Delete Button/Self-Timer Button/ Down Button 23. Display Button 24. Battery Cover Switch 30 29 28 27 26 25 24 25. Battery Cover 26. Playback Button 27. Tripod Socket 28. Macro Button/Left Button 29. SET Button 30.
Installing Battery and Memory Card 1. Open the battery cover door according to diagram (①,②,③) below: 2. Insert the batteries into the battery slot in the correct direction as shown in the following diagram: Please use brand name batteries (such as Energizer® or Duracell®) for optimal performance. Do not mix new and old batteries or use different brands of batteries. When replacing batteries, please replace all 4 batteries at the same time.
3. Insert the memory card into the memory card slot as shown in the diagram below: 4. Close the battery cover door according to instructions ① and ② below: 1 Write Protection Toggle Switch 2 A standard SD memory card is not included in the camera packaging and needs to be purchased separately. This camera takes a standard (SD/SDHC) memory card. We recommend using a name brand memory card that is Class 4 or higher and has a capacity of 4GB to 32GB.
Turn the Camera On / Off Slide the Power Switch to turn the camera on/off. Power Switch How to Take Pictures 1. Hold the camera with both hands, being careful not to block the flash and lens with fingers. 2. Point the lens toward the object you want to take a picture of, and then frame it with the LCD. 3. Use the Zoom button to select Tele or the Wide position to zoom in or out on your subject. When the power is off, press and hold the Playback button to power on and enter Playback Mode. 4.
Set your Language, Date/Time Set your Language, Date/Time after the First Power-On 1. When you turn the camera on for the first time, the language selection screen will appear. 2. Press the arrow buttons to select your desired language. 3. After you press the button to confirm your language selection, the Date/Time settings screen will appear. 4. Press the left/right arrow buttons to select the Date/Time to be adjusted: Time is displayed in YYYY.MM.DD/ HH:MM. 5.
5. Press the up/down arrow buttons to press the value for your selected entry. After you finish entering your settings, press the button to confirm. 6. Press the button and the following snapshot screen will appear: Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, then press the up/ down arrow buttons to select and press the button to enter the menu. 2.
MODE OVERVIEW Display Setting Press the button to display the settings: Classic, Full, Off. Classic: Displays the camera parameters on screen SD 1234 16M 00:56:00 F3.0 1/50 -0.3 EV 400 ISO Full: Camera parameters with Grid and Histogram SD 1234 16M 00:56:00 F3.0 20 1/50 -0.
LCD Screen Display Overview of the Screen Icons in Photo Shooting Mode 2 Macro Mode 3 Zoom Display (By turning the Zoom 3 4 5 1 2 lever) 4 Memory Card/Built-In Memory 5 Battery Status x1.0 6 White Balance (Adjustable in 6 Mode) 7 7 Color Effect (Adjustable in 8 18 9 Mode) 1234 17 10 8 Number of Remaining Shots 00:56:00 F3.0 1/50 -0.
19 20 21 Self-Timer 21 Self-Timer Off SD x1.0 Self-Timer 2 sec 25 24 Self-Timer 10 sec 23 1234 22 16M 00:56:00 F3.0 1/50 -0.3 EV 400 ISO 19 AF Mode Single-AF Multi-AF Object Tracking 20 Flash Mode Force Off Flash Auto 22 HDR (Adjustable in Mode) 23 Eye-Fi On (with signal) 24 Expo Metering AiAE Spot Center 25 Continuous Shot Single Continuous Shot Force Flash 3 Shots Slow Sync. Time-Lapse (30sec/ 1min/ 5min/ 10min) Slow Sync.
Overview of the Screen Icons in Movie Mode 1 2 3 5 4 7 Color Effect 6 8 Video Quality 9 Remaining Recording Time SD x3.4 15 7 14 13 10 Exposure Compensation (EV Value) 11 Image Stabilization 12 Focus Frame 12 11 00:56:00 -0.
Overview of the Screen Icons in Playback Mode 1 DPOF File 2 File Protection 1 2 3 1/45 SD 13 12 4 5 3 Memory Space (indicating the current number of photos and total number of photos for card memory size) 4 Memory Card/Built-In Memory 5 Battery Status 11 6 Zoom Magnification Area 10 6 x2 201 0 9 0 00 :00 7 8 7 Image Zoom Ratios 8 Image Zone 9 Shooting Date 10 Eye-Fi On (with signal) 11 Touch-Up 12 HDR 13 Date Folder 24
Using the Mode Dial This camera provides a Convenient Mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name Auto Mode Program AE Shutter Priority Aperture Priority Manual Mode Face Beautifier Icon Description In this mode, the optimal conditions for taking pictures will be automatically set based on the subject and environment. It is the most commonly used mode for taking pictures.
Auto Mode Auto mode is the most common and easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to adjust optimum settings for your photos and videos for the best possible results. SD Follow these steps: 1. Turn the Power Switch to turn the camera on. 2. Turn the Mode dial to . 3. Compose your picture in the LCD and press the shutter button halfway down to focus on the subject. 4.
Program AE Shutter Priority When (Program AE) Mode is selected, you can adjust the EV value and ISO value. 1. Turn the Mode dial to and press the button to configure settings. When (Shutter Priority) is selected, you can adjust the shutter speed, ISO value and EV value. The camera automatically sets the aperture value based on the shutter speed value and ISO value to get the most appropriate exposure value. 1. Turn the Mode dial to and press the button to configure settings. F3.0 1/50 -2.
Aperture Priority Manual Mode When selecting (Aperture Priority) Mode, you can adjust the aperture size / EV value and ISO value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. When selecting Manual ( ) Mode, you can set the aperture / shutter speed manually and ISO value. 1. Turn the Mode dial to and press the button to configure settings. 1.
Face Beautifier In Portrait Mode, the camera is set to automatically adjust camera exposure for realistic portrayal of skin tones. Beautifier Mode has 3 effects: • Effect 1: Skin Soften 1. Turn the Mode dial to select Face Beautifier Mode ( ). • Effect 2: Skin Soften + Eye Brightening 2. Press the button and press the up/ down arrow buttons to select . • Effect 3: Skin Soften + Eye Brightening + Eye Enlargement 3.
Panorama Mode With Panorama Mode, you can take a series of pictures which will be automatically stitched into a ultra-wide panoramic (up to 180°) picture by the camera. Follow the steps below: 1. Turn the Mode dial to Panorama Mode ( ). 2. Press the arrow buttons to select a desired shooting direction. Should you not select a direction, the default shooting direction is “right.” 2 seconds later, the camera will be ready to take pictures.
Scene Mode In Panorama Mode, the Flash, SelfTimer, Macro Modes and Exposure Compensation are not available. Focus Adjustment is also not available at this time. In the process of shooting in Panorama Mode, when the LCD shows "Improper alignment. Please try again," it means that in the process of the camera moving, the angle is off the green line and stitching cannot be completed. You will have to try again, keeping the LCD image aligned with the green line.
Scene 32 Description Pet Mode Rapidly identifies a pet (dog/cat), capturing the dynamic movement of pets. Sunset For sunsets. Captures subjects in strong sunlight. Fireworks For fireworks at night. The use of a tripod is recommended with this setting. Sport For fast-moving subjects. Captures sharp, action shots with minimal blur. This mode is not recommended for shooting indoors. Night Portrait For taking portraits against night scenery. Landscape For landscapes and outdoor shots.
Auto Scene (ASCN) In “ASCN” Scene Mode, the camera can intelligently detect different environments and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Mode Name Description Landscape Mode For landscapes, automatically adjusts the exposure and reproduces vivid green and blue colors. Portrait Mode Most suitable for capturing people with focus on their faces.
Movie Mode 1. Turn the Mode dial to select Movie Mode ( ). Movie Mode 2. Press down the Shutter Button to start recording. 3. Once you are finished, press the Fast Video Recording Button or the Shutter Button to stop recording and return to the shooting screen.
Custom Settings The user can store frequently used shooting modes and parameters, and switch to this mode for a quick adjustment. Changing these settings will override any previous settings in CS mode. Settings under mode: 1. Turn the Mode dial to select the mode and enter the setup screen as shown in the figure below: 3. As shown in the figure above, press the button and choose whether to continue the mode setting or rotate the Mode dial to skip.
4. Press the up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 5. Press the down arrow button select [Custom Settings] and press the button or the right arrow button to enter the menu. 6. Select [Yes] to save or [No] to cancel. 7. Turn the Mode dial to switch to the ). custom settings ( 8. The photo settings you stored the last time are used. When mode is used for the first time, there is no preset parameter stored in the mode.
BASIC OPERATION Using the Zoom Function Your camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Toggle the Zoom lever of the camera to zoom in or out on the subject while taking pictures. Zoom Lever SD Zoom Indicator 1234 00:56:00 -0.3 EV 400 ISO When the Optical Zoom reaches the threshold as Digital Zoom, release and turn the Zoom lever to T to switch between the Optical Zoom and Digital Zoom.
Focus Setting In different photo shooting modes, you can select different focus methods. 1. Press the up arrow button ( display the settings screen. ) to Object Tracking Smart tracking of the object in motion under the focusing shooting. 3. Press the button to confirm the settings and exit the menu. Single-AF 2. Press the left/right arrow buttons to select the following 3 modes: Single-AF The focus frame appears on the center of the LCD to focus on the subject.
Macro Mode The macro setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( ) to enter the Macro menu. Macro Off 2. Press the left/right arrow buttons to select the following 2 modes: • Macro Off Select this option to disable macro. • Macro On Select this option to make focusing on the object closer to the lens (At the W side, the shooting distance should be more than 1.6 cm). 3.
Self-Timer Setting Using this function to take pictures at pre-set intervals. The camera can be set to shoot after 2 seconds, 10 seconds after pressing the shutter or when a smile is detected. 1. Press the down arrow button ( enter the Self-Timer menu. ) to • Self-Timer 10 sec A single picture is shot 10 seconds after the shutter button is pressed. • Self-Timer Smile Press the shutter button and a picture will be taken immediately after a smile is detected. 3.
Flash Mode The flash provides supplemental light for a scene. The flash is usually used when shooting against the light to highlight the object. It is also suitable for metering and shooting in darker scenes to improve the exposure. 1. Press the flash button flash up. to pop the • • • • 2 1 2. Press the right arrow button ( ) to enter the Flash Settings Menu. • • ਘ⥺斿Ұ Force Off ܠ昘旅 3. Press the left/right arrow buttons to select the following 6 modes: Force Off Flash is turned off.
White Balance Setting The white balance function allows adjustment of the color temperature for different light sources (This can be Modes). adjustable in Follow the steps below to set the white balance of the camera: 1. Press the button to enter the White Balance Menu. '=( AWB 2.
Continuous Shot Follow the steps below to configure the Continuous Shot settings: 1. Press the to enter the Continuous Shot menu. • 3 Shots • Time-Lapse Take pictures based on the preset interval (30sec/ 1min/ 5min/ 10min). 3. Press the button to confirm the settings and exit the menu. 4. Press the shutter button to start shooting. Single The flash is disabled in this mode in order to achieve quick succession of shots. 2.
EV Setting The EV Function Menu of the camera includes functions, such as EV (Exposure Value) Adjustment, ISO, Shutter Adjustment, Aperture Adjustment, etc. Using the appropriate Function Settings can improve your pictures. To select the best setting follow these steps: 1. Press the button to display the Settings screen. 2. Press the left/right arrow buttons to select the Setting options. Exposure Compensation Set up Exposure Compensation to adjust the picture brightness.
ISO Shutter Adjustment The ISO function allows you to set the sensitivity of the camera's light sensor based on the brightness of the scene. To improve the camera's sensor performance in darker environments, a higher ISO value is required. A lower ISO value is needed when shooting in brighter conditions. For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed to obtain the most suitable exposure value.
Using Quick Recording Aperture Adjustment You can adjust the aperture size value in this setting. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. (This can be adjusted in Mode) F3.0 46 1/50 -1.0 EV 100 ISO In Photo Shooting Mode, press the Recording Shortcut Button to begin recording video.
“i” Button Function Menu Mode: The Image Color Setting allows you to select different effects. 1. Press the button to select the Image Color Setting Menu. 2. Press the left/right arrow buttons to select the image color setting options.
PLAYBACK Viewing Photos and Videos To view photos and videos on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Use the left/right navigation buttons to scroll through the photos or video clips stored on the internal memory or on the Memory Card. 3. To play a selected video clip, press the button to enter the movie playback mode. An operation guide appears on the screen when playing back a video.
Thumbnail View When in Playback Mode, rotate the Zoom lever counter clockwise to the position to display thumbnail images of the photos and videos on the screen. W Zoom Out T Zoom In 2. Press the arrow buttons to select a picture or video clip to view and button to restore it to the press the original size. If the indicator appears on the LCD, then a movie file is currently being displayed. 1. Slide the Zoom Lever to switch between 3 x 3 and 4 x 4 thumbnails.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the Zoom Slider to zoom in on the photos 2 to 8 times their original magnification. 1. Press the button to switch to Playback Mode. 2. Press the left/right arrow buttons to select the picture on which to use the zoom feature. 3. Rotate the Zoom Lever clockwise to ( ) to zoom in. 4. The bottom right corner of the screen will display the number of times the image is magnified and area of the photo shown. x2 5.
Deleting Photos and Videos In Playback Mode, press the down arrow button to delete your photos and videos. To delete photos or videos: 1. Press the button to switch to Playback Mode. 2. Press the left/right arrow buttons to select the photos and videos to be deleted. 3. Press the down arrow button and the deletion screen is displayed. 4. Press the up/down arrow buttons to select [Delete One] or [Exit] and press the button to confirm. Deleted photos/video clips cannot be recovered.
Slideshow You can use this setting to view all of the stored pictures as a slideshow. 1. Press the screen. button to enter Playback 2. Press the button to enter the slide option (except for video files). 3. Press the left/right arrow buttons to select slideshow playing or [Cancel] to return to the Playback screen. 52 4. Press the setting. button to confirm the Pictures scroll automatically during a slide show. Slide playing function supports movie playing.
USING THE MENUS Photo Setup Menu Mode: 1. In Photo Shooting Mode, press the button to enter the Photo Shooting Menu. Expo Metering (Exposure Metering) Use this setting to select the "target" size of the camera's field of view to be metered. 2. Press the up/down arrow buttons to select the Photo Shooting Menu to be set. 3. Press the left/right arrow buttons to select the Photo Shooting Menu to be set and press the button to confirm. Refer to the following pages for more details about each setting.
Image Size OIS (Optical Image Stabilization) The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the photo image quality. This mode can help reduce photo blur caused by unintentional shaking or low light. The bigger the number of recorded pixels is, the better the image quality becomes. As the number of recorded pixels lessen, you will be able to record and store more images on a memory card.
Continuous AF (Auto-Focus) HDR (High Dynamic Range) Use the Continuous AF setting to be able to continuously focus automatically when taking pictures. With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene.
Face Beautifier Scene Select the effect for Face Beautifier Mode. Select a Scene Mode under SCN Mode.
• Shooting Menu in the Shooting Mode (O: Available X: Unavailable) Shooting Modes Options 16M O O O O O O O O O O O O O O O O O O O O O O O O O O O O O X X X X X X O 57
Photo Shooting Setting Menu Mode: Quality 1. Press the button in Photo Shooting Mode and press the up/down arrow buttons to select . The quality setting can be used to adjust the image compression ratio. Quality Best Fine Normal 58 2. Press the button to enter the menu. 3. Press the up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 4.
AF Assist Beam (Auto-Focus Assist Beam) In a darker environment, the AF assist beam setting can be turned on for better focus. Digital Zoom This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen for the selected time.
Custom Settings Face Detection Custom settings stores the current photo shooting mode and its parameters. The stored mode and parameters are directly invoked in Custom Settings Mode. Detects and focuses on faces to make all faces as clear as possible in Photo Mode.
Movie Menu Mode: Expo Metering (Exposure Metering) 1. Turn the Mode dial, select the mode and press the button to enter the Movie Menu. Use this setting to select the "target" size of the camera's field of view to be metered. Expo Metering: AiAE Expo Metering: AiAE 2. Press the up/down arrow buttons to select the Movie Menu to be set. 3. Press the left/right arrow buttons to select the Movie Menu to be set and press the button to confirm.
Video Quality Set the image resolution used during video recording. When recording in higher pixel resolutions for extended periods of time, this can cause the camera to generate heat. This is not a camera malfunction. OIS (Optical Image Stabilization) This mode can help reduce photo blur caused by unintentional shaking, low light or slow shutter speed. Size: 720p 30fps The speed requirements for reading and writing high resolution image pixel images to a memory card are as follows: No.
Movie Setting Menu Mode: 1. Turn the Mode dial and select to enter the video recording screen. 2. Press the button, press the up/ down arrow buttons to select , and press the button to enter the menu. Press SET To Enter Menu 3. Press the up/down arrow buttons to , and press the button or select right arrow button to enter the menu. 64 4. Select the items to be set and press the button or the right arrow button to enter the menu. 5.
Digital Zoom Custom Settings This setting is for adjusting Digital Zoom. If this function is disabled, only Optical Zoom can be used. Custom settings stores the current movie shooting mode and its parameters. The stored mode and parameters are automatically used in Custom Settings Mode.
Playback Menu Mode: 1. Press the menu. button to display the playback screen and press button to enter the 2. Press the up/down arrow buttons to select the desired playback and press the button to enter. 3. Press the left/right arrow buttons to select an option and press the confirm. Photo Video Press SET To Confirm Press SET To Confirm Normal Mode Normal Mode Refer to the following pages for more details about each setting.
Playback HDR (High Dynamic Range) 1. Press the button, select the settings and press the button to display the settings screen. 2. Press the left/right arrow buttons to select from the following 2 functions: Normal Mode: Display all images. Date Mode: Arranged by date. With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and low lights captured to more accurately represent the actual scene. 1.
Touch-Up 1. In Playback Mode, press the left /right arrow buttons to select the photos to be edited. 2. Press the button, select the settings, and press the button to display the settings screen. 3. Press the left/right arrow buttons to select Touch-up options or [Cancel] to return to the Playback screen. : Red-Eye Reduction : Skin Soften : Eye Brightening : Eye Enlargement : Cancel 68 4. Press the setting. button to confirm the The Touch-Up referred to is the individual use of three effects.
Rotate You can use this setting to change the orientation of the picture. 1. In Playback Mode, press the left /right arrow buttons to select the photos to be edited. 2. Press the button, select the settings, and press the button to display the settings screen. 3. Press the left/right arrow buttons to select the rotation direction or [Cancel] to return to the Playback Screen. : Turn Right 4. Press the setting. button to confirm the Videos and panoramic pictures cannot be rotated.
Resize This setting allows you to resize a picture to a particular resolution and saves it as a new picture. 1. In Playback Mode, press the left/right arrow buttons to select the photos to be edited. 2. Press the button, select the settings and press the button to display the settings screen. 3. Press the left/right arrow buttons to select [1024] or [640] or select [Cancel] to return to the Playback Screen. : Resize to 1024 x 768 : Resize to 640 x 480 : Cancel 4.
“i” Button Playback Function This setting allows you to change the picture color effect. The file is saved as a new photo and stored in the camera’s memory or SD card together with the original photo. 1. In Playback Mode, press the left/right arrow buttons to select the photos to be edited. 2. Press the button to select the image color setting menu. 3. Press the left/right arrow buttons to select the corresponding menu or [Cancel] to return to the playback screen. 4. Press the setting.
Playback Setting Menu Mode: 1. Press the button to show the playback screen, press the button, and press the up/down arrow buttons to select . 2. Press the button to enter the menu. 3. Press the up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 72 4. Press the up/down arrow buttons to select the item to be set and press button or right arrow button to the enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm.
Protect To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. There are 4 sub menus available: • One Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • Date Folder Protect all photos in the Date Folder. • All Lock all photos or videos. To lock or unlock the photo and video files: 1.
Delete You can delete one or all photo/video files. There are 3 sub menus available: • One Delete one photo or video. • Date Folder Delete all photos in the Date Folder. • All Delete all photos or videos. 3. Press the up/down arrow buttons to select an option and press the button to confirm. To delete photo or video files: 1. Press the up/down arrow buttons to select [Delete] and press the button or right arrow button to enter the submenu. 2.
DPOF (Digital Print Order Format) Trim The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the memory card to print without having to individually specify the photos you want to print. The Trim setting allows you to crop photos and save them as new pictures. 1. Press the up/down arrow buttons to select [Trim] and press the button or right arrow button to enter the menu. 2.
Setup Menu Mode : 1. Press the button in any mode and press the up/down buttons to select . 2. Press the button to enter the menu. 3. Press the up/down arrow buttons to select , and press the button or right arrow button to enter the menu. Refer to the following pages for more details about each setting. Sound Settings To change this setting: 1. Select [Sound Settings] in the basic settings menu. Press the button or right arrow button to enter the menu. 2.
Power Saver Language This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD and camera off automatically after a consecutive period of inactivity. 1. Select [Power Saver] in the Basic Settings Menu. Press the button or right arrow button to enter the menu. 2. Press the up/down arrow buttons to select an option. Refer to the “Resetting your language” section on page 18.
Date/Time Battery Type Refer to the “Resetting Date/Time” section on page 19. Please choose the right type of battery before using. LCD Brightness 1. Select [BATTERY TYPE] in the basic settings menu. Press the button or right arrow button to enter the menu. Use this setting to adjust the brightness of your LCD. 1. Select [LCD Brightness] in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the up/down arrow buttons to select an option. 2.
File Settings Format Please Note: formatting enables you to delete all contents on a memory card and camera’s built-in memory, including protected photo and movie files. To use this setting: 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 3.
Copy to Card Use this setting to copy the files stored in the internal memory to an memory card. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow buttons to select [Copy to Card] and press the button or right arrow button to enter the menu. 4.
Reset Firmware (FW) Version Use this setting to restore the camera to its original default settings. Use this setting to view the current firmware version installed on your camera. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 2.
CONNECTIONS Connecting to a Computer You can use a micro USB cable (which should be purchased separately) to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be used to connect to either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a computer. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu.
Transferring Files to Your Computer The computer will automatically detect the camera as a removable drive. Double-click the “My Computer” icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your computer as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer: 1. Make sure the computer is turned on. 2. Connect one end of the micro USB cable to the USB/AV OUT port on your camera. 3.
Video System You can use the AV cable (which should be purchased separately) to connect the camera and the television for setting up the video output. Connect one end of the AV cable to AV port of the camera and connect the other end to AV-OUT port of the television. To adjust the format of the video output system according to your requirements: 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2.
Set Eye-Fi Card Connection Mode This camera supports wireless connection for Eye-Fi cards. Enable the Eye-Fi connection by following the steps below: 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press the up/down arrow button to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow buttons to select [Eye-Fi] and press the button or right arrow button to enter the menu. 4.
Supported HDMI Connections HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Direct transmission of digital video signals to your TV reduces conversion loss and improves image quality. Connecting HDMI-Ready TV 1. Use a cable with a high resolution output terminal (which should be purchased separately) to connect the camera to the television which meets HDMI standards. 2.
Connecting to a PICTBRIDGE™ Compatible Printer PICTBRIDGE™ technology allows printing of photos saved on the memory card by a PICTBRIDGE™ compatible printer. To find out if a printer is PICTBRIDGE™ compatible, simply look for the PICTBRIDGE™ logo on the packaging or check the owner's manual for specifications. With the PICTBRIDGE™ function on your camera, you can print captured photos directly to a PICTBRIDGE™ compatible printer using the micro USB cable, without the need for a PC. 3.
Connecting to your Printer 1. Make sure the printer is turned on. 2. Connect one end of the micro USB cable to the USB port on your camera. 3. Connect the other end of the micro USB cable to the USB port on the printer. If the camera is not connected to a PICTBRIDGE™ compatible printer, the following error message will appear on the LCD.
Using the PICTBRIDGE™ Menu After setting the USB Mode to Printer, the PICTBRIDGE™ Menu will appear. Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PICTBRIDGE™ Menu, select [Print (with Date)] and the screen as shown below appears. Press the up/down arrow buttons to select a menu item and press the button or right arrow button to enter the item.
Print (without Date) 3. Press the up/down arrow buttons to select the number of copies for the currently displayed photo. 4. Press the button and the following screen will appear. 5. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing. Use this setting to print the photos without dates on them. 1. In the PICTBRIDGE™ Menu, select [Print (without Date)] and the screen as shown below appears. 2. Press the left/right arrow buttons to select a photo to be printed. 3.
Print Index You can print all photos in the camera via this function. 1. In the PICTBRIDGE™ Menu, select [Print Index] and the screen as shown below appears. 5. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing. 2. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings first. See the “DPOF” section on page 75. Select [Exit] to exit the PICTBRIDGE™ Menu. At this time, the message [Remove USB Cable!] will appear on the screen. 1. In the PICTBRIDGE™ Menu, select [Print DPOF Images] and the screen as shown below will appear. Disconnect the micro USB cable from the camera and printer. 2.
APPENDICES Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3"CCD Effective Pixels 16.15 Megapixels Total Pixels 16.44 Megapixels Focal Length 4.3mm (Wide) — 172mm (Tele) 35mm Film Equivalent 24mm (Wide) — 960mm (Tele) F Number F3.0 (Wide) — F6.8 (Tele) Lens Construction 11 groups 15 elements Optical Zoom 40x Focusing Range Normal: (Wide) 50cm ~ ∞, (Tele) 200cm ~ ∞; Macro: 1.
Still Image (16:9) (3:2) 16MP: 4608 × 3456 14MP: 4608 × 3072 12MP: 4608 × 2592 10MP: 3648 × 2736 2MP: 1920 × 1080 5MP: 2592 × 1944 3MP: 2048 × 1536 0.3MP: 640 × 480 Movie 1280 × 720 (30fps), 1280 × 720 (15fps), 640 × 480 (30fps) (4:3) Number of Recording Pixels Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 94 Still Image Exif 2.3 (JPEG) Movie MOV [Image: H.
HDR Yes Video Panorama Up to 180° (Horizontal) LCD Display 3.
Flash Flash Method Pop-Up (Manual) Flash Modes Force Off, Flash Auto, Force Flash, Slow Sync., Slow Sync. + Red-Eye, Red-Eye Reduction Internal Memory: Approx. 8MB 96 Recording Media SD/SDHC Card (Up to 32GB Support) [MMC Card not supported ] Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.0 (Micro 5 pin USB), HDMI (Type D) Eye-Fi Support Yes Power AA Alkaline Battery (× 4), AA Ni-MH Battery (× 4) (Not Included) Shooting Capability (Battery Performance) Approx.
Prompts and Warning Messages Message Description Solution Warning! Battery exhausted. The camera batteries are depleted. It is a warning indicating that the camera is going to shut off. Replace with new batteries. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn the camera off and restart it to reset the lens. Suggest using tripod.
Message Description Solution Remove USB Cable! Indicates that you can disconnect the USB cable. This message disappears after you disconnect the USB cable. Connection Failed! Failure to connect to your PC, printer, TV (with HDMI). Remove USB cable and retry connection. Write Protect! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. This message will disappear after 2 seconds. Card Full! Indicates that the SD card is full.
Message Description Solution Card is not formatted. When an error occurs with the memory card, the message “Not Formatted” will appear. Format the memory card. WARNING: Formatting the SD card will erase all data on the card. Copy the data from the memory card to another storage device, such as a computer. Otherwise, all data will be erased after the format. This message will disappear after 2 seconds.
Message Solution Exceeded maximum folder number. Copy the data to your PC, and format the memory card using the camera. Too many pictures for fast processing. During the playback by date, the images exceed specifications so that it is not possible to play by date. This message disappears after 2 seconds and the camera returns to normal playback mode. Unable to recognize files. The format of the file to be viewed is not supported or the file is corrupted so it cannot be properly read.
Troubleshooting Problem Possible causes Solution Camera does not turn on The batteries have been depleted. The batteries are not inserted correctly. Camera turns off suddenly during operation The batteries have been depleted. Replace the batteries. The picture is blurry Camera shakes while taking a picture. Turn on OIS Feature. Please use tripod for high magnification (above 15X) Optical Zoom.
Problem 102 Possible Causes Solution Saving data to memory card is slow Using a memory card below Class 4 may result in slower recording times. Use a memory card with write Class 4 or higher to improve performance. Cannot write to the memory card The memory card has been locked. Release the write lock of the memory card or replace with another card.
© 2019 JK Imaging Ltd. All Rights Reserved. The Kodak trademark, logo and trade dress are used under license from Eastman Kodak Company. All other logos, products or company names that are referred to in this document are trade names, trademarks or registered trademarks of their respective owners and holders . The owners and holders are not affiliated with JK Imaging Ltd., our products or our website. JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA kodakpixpro.com Made in Myanmar Ver.
