User Manual

36 37
Custom Settings
The user can store the frequently used
shooting modes and parameters and switch
to this mode for quick adjustment.
Settings under mode (unset state
or state after reset):
1. Turn the mode dial to select the
mode, and enter the setup screen, as
shown in the figure below:
Select one capture mode to define CS .
Landscape
Save
Exit
2. As shown in the above figure, press
the left / right arrow buttons to select a
scene, and press the button to enter
the shooting screen.
3. As shown in the above figure, press the
button, and choose whether to
continue the mode setting.
Or
Go to setting CS mode
Rotating the mode dial to skip .
Yes
Settings under non- mode:
1. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the
current mode.
3. Press the button, press the up/down
arrow button to select , and press the
button to enter the menu.
4. Press up/down arrow button to select
, and press the button or right arrow
button to enter the menu.