Operation Manual

42
Display of Wi-Fi Connection Status
The Wi-Fi has successfully connected but APP
is not enabled:
Wi-Fi Mode
Connected with device
3')'JJXKYY ^^ ^^ ^^
AP mode
Disconnect
The Wi-Fi has successfully connected and APP
is enabled:
Wi-Fi Mode
Connected with APP
XXXXX
Disconnect
4. Press the
AC
/
C
A
/
A
C
/
CA
buttons to select and then press the
button to confirm your selection. Enter the
completion of WPA2 PSK after password
storage.
5. Connect immediately after saving.
• If connected, the LCD will display as
shown below:
Station
Wi-Fi Mode
Connected with device
SSID: XXXXXXXX
Disconnect
• If connect failed, please check Wi-Fi
device and try again.
6. After connection, click the icon of the APP
on the smart device, you may use it to
carry out relative operation.