Operation Manual

51
Settings under mode (unset state or state
after reset):
1. Rotate the mode dial to select , and then
the camera enters the setting interface as
shown below:
Select one capture mode to define CS .
Auto Mode
Save
Exit
2. As shown in the picture, press the
A
C
/
CA
button to select a capture mode that
you want to define as , and press the
button to enter the shooting screen.
3. As shown in the picture, press the
button to confirm setting or to exit without
setting by turning the mode dial.
Rotate the mode dial to skip .
Go to setting CS mode.
Yes
Or
For setting under other modes (use this
method to select a different custom setting):
1. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the current
mode.
Custom Settings
The user can store frequently used shooting modes or scene modes with parameters and switch to
this mode for quick adjustment.