User Manual
Before You Start Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK Company Website: www.kodakpixpro.com INDUSTRY CANADA This device complies with Canadian RSS-210. This device complies with Industry Canada license-exempt RSS standard (s).
For Customers in Europe This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems available in your country for proper, safe disposal of this product. “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection.
Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) - EN 300 328 V1.8.1 : 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
About this Manual Thank you for purchasing the KODAK PIXPRO Digital Camera. Please carefully read this manual and keep it well for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd..
Safety Notes Safety notes for this camera 6 Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it. Do not use or store the camera in a hot environment or under direct sunlight. Do not use or store the camera near a powerful magnetic field, for example near a magnet or transformer.
Safety notes for battery Please use a battery that is the same type as the one included. Do not expose the battery to water. Always keep the battery contacts dry. Please use the attached charger to charge the battery. Do not heat the battery or throw it into a fire to avoid a possible explosion. If battery fluid leaks inside the camera, contact our customer service department. If the battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention.
Safety notes for memory card We suggest buying only well-known, name brand memory cards to ensure peak performance. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not modify the name of the files or folders of the memory card using your PC.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
Contents Before You Start...............................1 Set your Language, Date/Time after the first power-on....................... 24 Safety Notes.....................................6 Resetting your Language..................... 25 Contents..........................................10 Getting Ready................................15 Resetting Date/Time........................... 26 Mode Overview.............................27 Display Setting..............................................
Select an appropriate capture mode........ 31 Using the Zoom Function............................ 54 Auto Mode............................................. 32 Focus Setting................................................. 55 Program AE............................................ 34 Macro Mode.................................................. 56 Shutter priority...................................... 34 Self-timer Setting......................................... 57 Aperture priority...................
i Button Function Menu............................... 64 Playback Mode..............................65 Image Size.............................................. 73 OIS (Optical Image Stabilization)..... 74 Cont. AF.................................................. 74 Viewing Photos and Videos........................ 65 HDR......................................................... 75 Thumbnail View............................................ 66 Beautifier................................................
Movie Menu.................................................. 81 Color........................................................ 89 Expo Metering....................................... 81 Playback Settings Menu.............................. 90 Movie Size.............................................. 82 Protect..................................................... 91 OIS (Optical Image Stabilization)..... 83 Delete...................................................... 92 Movie Setting Menu...............
File Settings................................................... 97 Connecting to your Printer.............. 105 Format..................................................... 98 Using the PictBridge Menu.............. 106 Copy to Card.......................................... 98 Video System............................................. 110 File Numbering...................................... 99 Set Eye-Fi SD Card Connection Mode... 111 Reset........................................................
Getting Ready Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer. (The battery charger may be different in shape than what is pictured below.
Install Lens Cap and Neck Strap 16
Part Names 1. Micro HDMI Port 2. Micro USB Port 5 6 7 89 10 11 3. Zoom Lever 4. Shutter Button 5. Strap Eyelet 4 3 2 1 6. Exposure Compensation Button 7. Continuous Shot Button 8. Power Button 9. AF Assist Beam/Self-timer Lamp 10. Flash Lamp 11.
12. Microphone 13. Electronic View Finder (EVF) 12 13 14 15 14. EVF/ LCD Switch Button 15. Indicator Lamp 16 17 18 19 20 21 22 16. Mode Dial 17. Fast Video Recording Button 18. Menu Button C AF Button/Up Button 19. A 20. A C Macro Button/Left Button 21. A C Flash Button/Right Button C Delete Button/Self-timer Button/Down Button 22. A 5 28 27 26 25 24 23 29 23. Display Button 24. Playback Button 25. SET Button 26. i Button 27. LCD 28. Speaker 30 29. Battery Cover 30.
Installing Battery and Memory Card 1. Open the battery cover according to the direction of arrow. 1 2. Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the picture. Push the battery down until it locks in place.
3. Insert the memory card into the memory card slot as shown in the diagram. 4. Close the battery cover. 1 Write protection buckle 2 The memory card (SD/SDHC) is optional and not included in all camera packaging. If you have to purchase a memory card, select one with storage capacity between 4GB and 32GB to ensure correct data storage. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully.
Charging Battery Please insert the battery and charge it under shutdown mode. 1. Connect the camera and the power charger using the supplied Micro USB cable. 2 2. Insert the plug of the power charger into the power outlet to charge the battery. After the battery is stored for a long period of time, use the supplied power charger to charge the battery prior to use. 1 To have maximum battery life, charge the battery for at least 4 hours the first time.
3. When the camera is turned off, you can also connect the camera to your PC using a USB cable to charge the battery. 3 Please charge the battery indoors between 0°C and 40°C.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button Press and hold the button to power on and enter Playback mode.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. C /A C /A C /A 2. Press the A buttons to select your desired language. C 3. After you press the button to confirm the selection, the Date/Time settings screen appears. C button to select the C /A 4. Press the A Date/Time to be adjusted: Time is displayed in yyyy:MM:dd HH:mm.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. C /A C 1. Press the button, press the A button to select , and press the button to enter the menu. 2. Press the A and press the C /A /A C button to select , C button to enter the menu. C button to select C /A 3. Press the A 「Language」and press the /A C button to enter the menu. C C /A C /A C /A 4.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. C 1. Press the button, press the A C /A button to select , and press the button to enter the menu. 2. Press the A and press the C /A /A C button to select , C button to enter the menu. C button to select C /A 3. Press the A 「Date & Time」and press the /A C button to enter the menu. Sound Settings Power Saver Date & Time Home 2014.06.
Mode Overview Display Setting Press the Classic: button to display the settings: Classic, Full, Off. Displays the camera parameters on screen Off: Does not display any additional icons on screen SD 1234 00:56:00 F2.8 Full: 1/50 -0.3 EV 400 ISO Camera parameters with Grid and Histogram SD 1234 00:56:00 F2.8 1/50 -0.
LCD Display Overview of the screen icons in photo shooting mode x3.6 16M 00:56:00 F3.6 1/50 -0.
Overview of the screen icons in movie mode SD x3.6 00:56:00 -0.
Overview of the screen icons in playback mode 4 SD Memory Card/Built-in Memory 5 Battery Status 6 Zoom Magnification Area 7 Image Zoom Ratios 8 Image Zone 9 Shooting Date 10 Continuous Capture Group Playback 11 Eye-Fi ON (with signal) DPOF File 12 Touch-up 2 File Protection 13 HDR 3 Memory Space (indicating the current number of photos and total number of photos) 14 Date Folder 1 30
Using the Mode Dial This camera provides a convenient mode dial that allows you to manually switch among different modes with ease. Select an appropriate capture mode 1. Press the Power button to turn the camera on. Aim the camera at the object and then frame with the LCD. 2. Rotate the mode dial to select an appropriate shooting mode. Auto Mode Manual Mode Movie Mode Program AE Face Beautifier Custom Settings Shutter priority Wi-Fi Mode Aperture priority Scene Mode 3.
Auto Mode The camera will automatically detect the most suitable scene to capture the best pictures. SD 00:56:00 Auto Mode The camera will automatically adjust the exposure and focus to ensure the best possible pictures. Landscape Mode For landscapes, will automatically adjust the exposure and reproduce vivid green and blue colors.
Portrait Mode Most suitable for capturing people with focus on their faces. Night Portrait When you take portraits at night, or in low light conditions, will automatically adjust the exposure for people and night scenes. Backlit Portrait When the sun or any other light source is behind you, will automatically adjust the foreground exposure to produce the best pictures possible. Night Mode For night scenes, will automatically increase the ISO value to compensate for low light.
Program AE The user can switch the ISO and EV value according to personal preference, the camera can automatically set the shutter speed and aperture value. Shutter priority The user can adjust the shutter speed, EV and ISO values. It is mostly used to shoot the moving object. Aperture priority The user can adjust the aperture size, EV and ISO values. It is generally used to shoot inanimate object and control the view depth.
Mode: Follow the steps below to adjust the parameters: 1. Rotate the mode dial to select a mode you want, press the F2.8 1/50 0.3 EV button to configure settings. 400 ISO 2. Press the A C /A C button to select an adjustment item. 3. Press the A C /A C button to adjust the parameters. 4. Press the button to confirm the settings and enter the shooting screen.
Face Beautifier The camera is set to automatically adjust camera exposure for realistic portrayal of skin tones. 1. Rotate the mode dial to select 2. Press the . button and press the A C /A C button to select C /A 3. Press the A C button to select an option and press the return to photo shooting mode. SD x3.6 1234 16M 00:56:00 -0.3 EV 36 400 ISO • Effect 1: Skin Soften • Effect 2: Skin Soften+Eye Brightening • Effect 3: Skin Soften+Eye Brightening+Eye Enlargement .
Wi-Fi Mode Make image transmission and remote control by connecting smart device with Wi-Fi. Matters needing attention before use Please confirm that your smart device is a smart phone with Android 2.3 or 4.x system, a tablet computer with Android 4.x or is an iOS 6/7 system. If not, please upgrade your smart device before using the APP.
Route of downloading the APP package: Please download APP installation package (APP name: PIXPRO Remote Viewer) to your smart device from the path below and install this application procedure. Android system: iOS system: For Android devices, search and download the App “PIXPRO Remote Viewer” in Google play, and install it following the instructions on the interface. https://play.google.com/store/apps/ details?id=com.jkimaging.
1. Rotate the mode dial to select and then enter the Wi-Fi selection interface. Wi-Fi Mode Settings Station AP mode In AP mode, the camera will act as an access point enabling another Wi-Fi device to connect to it. 2. Press the A C /A C button to select and set options. • 「Settings」: Customize the Wi-Fi settings for the camera system. • 「Station」: Use the Station Mode to connect to a "Personal Hotspot" created by your mobile device.
AP mode This camera may connect with your smart device through Wi-Fi. Settings of Camera: 1. Select and press the the setting interface. button to enter AP mode Setting pre-connected device for the following serial number: 99/* 6/>685 '@ E>>>> Settings of Smart Device: 2. Enable the Wi-Fi of smart device and then search surrounding wireless devices. 3. Select the name of camera SSID to be connected and then input the eight-digit number password after WPA2 PSK on the camera. 4.
Station Enable image transmission and remote control by connecting the camera with a Wi-Fi access point created by your smart device. 1. Enable the Wi-Fi access point of smart device. C /A C button to select 3. Press the A the name of smart device to be connected and then press the button to confirm. Then, the camera enters the password input interface. 2. Select on camera and then press the button to confirm connection with smart device.
Display of Wi-Fi Connection Status C /A C C /A C /A 4. Press the A buttons to select and then press the button to confirm your selection. Enter the completion of WPA2 PSK after password storage. The Wi-Fi has successfully connected but APP is not enabled: Wi-Fi Mode 5. Connect immediately after saving.
For interrupting the connection: The Wi-Fi of smart device interrupts: Wi-Fi Mode Wi-Fi Mode Disconnect from device? AP mode No Disconnected, please check Wi-Fi device and try again. Yes Back • No: Keep Wi-Fi connected and back to previous page. • Yes: Disconnect and back to Wi-Fi mode for interface connection. • Back: Back to Wi-Fi mode SSID screen.
Settings The name of this camera can be changed through key stroking. 1. Select and then press the enter the setting interface. button to C /A C button to select 2. Press the A the option to be adjusted and then press the button to enter the menu. DSC Device MAC Address PIXPRO AZ526 38 67 93 XX XX XX DSC Device The default name of DSC Device is「PIXPRO AZ526」. Change the name of DSC device through key stroking.
Scene Mode The user can select an appropriate mode from the 13 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically. 1. Rotate the mode dial to select 2. Press the A to confirm. C /A C /A . C /A C buttons to select a scene, and press the button Multi Exposure 3. If any need of changing the scene, please press the button and then the C /A C /A C buttons to reselect the scene.
Handheld Night Reduce blur when shooting low light/ illuminated scenes. Quickly take 4 photos below 8M (including 8M) and then overlap as a clear night image. Pet Mode Rapidly identify pet (dog/cat), capture the dynamic moment of pet. When a cat /dog face is detected, a white focus frame appears. The camera will take a picture and save it regardless of whether the focus is successful (if successful, there appears a green focus frame; if not, there is an orange frame).
Multi Exposure Suitable for shooting moving objects (as many as 7) in the same background. Keep camera steady before shooting. Press and hold the Shutter button to take 7 photos continuously when it will stop automatically. To stop shooting, release the Shutter button in the midway. Objects shall be moved only from left to the right in order to be recorded. Objects moving from other directions would not be recorded. Shooting effect will be influenced if object is moving too fast or too close.
Portrait For shooting portraits. Snow For subjects in the snow. Reduce underexposure. Children For kids and pets. Flash is disabled for eye protection. Party For subjects at night without using a tripod. Capture sharp shots without blur. Panorama Mode This feature allows you to capture a panoramic view that will have significantly more content than a single photograph. Follow the instruction arrow with a smooth and steady movement of the camera to seamlessly shoot an ultra-wide scene of up to 360 degrees.
3. Compose your shot on the LCD and half press the Shutter button to focus on the subject. After focusing, fully press the Shutter button down to take picture. At this time, the process dialog of panorama mode stitching appears on the screen. 4. Rotate the camera according to the set direction. When the range of rotation does not exceed the range that the camera can detect, the progress dialog along the indication arrow partially turns red. When it completely turns red, panorama mode shooting is finished.
Movie Mode Switch to this mode to record videos. Follow the steps below: 1. Rotate the mode dial to select 2. Press the , and it will enter the movie screen. button or the Shutter button to start recording. x3.6 00:00:06 3. Press the button or the Shutter button again to stop recording, save it automatically and then the camera will return to the movie screen. In the recording process, you can rotate the zoom lever to zoom in or out of the subject.
Custom Settings The user can store frequently used shooting modes or scene modes with parameters and switch to this mode for quick adjustment. Settings under after reset): mode (unset state or state 1. Rotate the mode dial to select , and then the camera enters the setting interface as shown below: 3. As shown in the picture, press the button to confirm setting or to exit without setting by turning the mode dial. Go to setting CS mode. Select one capture mode to define CS .
C/ button and then the A , and press the button to enter the menu. 3. Press the A C button to select C /A 4. Press the A , and press the enter the menu. /A C button to select C button to C button to select 「Custom 5. Press the A C Settings」and then press the /A button to enter the menu. Custom Settings Reset camera settings to custom settings mode. No Yes 7. Rotate the mode dial to switch to Custom Settings . 8. The photo settings you stored the last time are invoked.
Basic Operation Using EVF (Electronic View Finder) EVF can be used to observe the scenes and objects. EVF has the following advantages: It will not be affected by ambient light and may avoid poor composition due to light reflection on the LCD. Follow the steps below: 1. Press the Power button to turn the camera on and press the display. At this time, the LCD is closed. button to switch to the EVF 2. View the scenes and objects through the EVF. 3.
Using the Zoom Function Your camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Rotate the Zoom Lever of the camera to zoom in or out of the subject while taking pictures. Zoom Lever When the Optical Zoom reaches the threshold as Digital Zoom, release and turn the Zoom Lever to T to switch between the Optical zoom and Digital zoom.
Focus Setting This function can be adjusted in settings: 1. Press the A mode, please follow the steps below to configure the C button to enter the Focus menu. Single-AF 2. Press the A C /A C button to select the following 3 modes: • Single-AF The focus frame appears on the center of the LCD to focus on the subject. • Multi-AF The camera automatically focuses the subject in a wide area to find the focus point. • Object Tracking Smart tracking of the object in motion under the focusing shooting.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. This function can be adjusted in the settings: 1. Press the A mode, please follow the steps below to configure C button to enter the Marco menu. Macro Off 2. Press the A C button to select the following 2 modes: • Macro Off Select this option to disable Macro.
Self-timer Setting Using this function can take photos at regular time. The camera can be set to shoot after 2 seconds, 10 seconds since pressing the Shutter button or shoot after smile. This function can be adjusted in mode, please follow the steps below to configure the settings: C button to enter the 1. Press the A Self-timer menu. • Self-timer Smile Press the Shutter button and a picture will be taken immediately after a smile is detected. 3.
Flash Mode The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows. This function can be adjusted in mode, please follow the steps below to configure the settings: C button to enter the Flash menu. 1. Press the A • Slow Sync. This allows for night scenery photos that include people in the foreground. (Suggest using tripod) • Slow Sync. + Red-Eye Use this mode for slow synchro shots with red-eye reduction.
White Balance Setting The white balance function allows adjustment of the color temperature for different light sources. This function can be adjusted in settings: 1. Press menu. mode, please follow the steps below to configure the button to enter the White Balance • Fluorescent • Fluorescent CWF • Incandescent • Manual WB (Fully press the Shutter button to detect the white balance value) • Color Temp.
Continuous Shot This function can be adjusted in mode, please follow the steps below to configure the settings: 1. Press the button to enter the Continuous • Cont.Shot-High Speed (VGA) Shot menu. For continuous shot with VGA pixel. Single C /A 2. Press the A following 5 modes: 60 C button to select the • Single Capture a single shot only. • Continuous Shot Take several pictures at a time. • Cont.Shot-Fast (4M) For continuous shot with 4M pixels.
EV Settings The EV function menu of the camera includes functions, such as EV adjustment, ISO adjustment, Shutter adjustment, Aperture adjustment, etc. Using the appropriate function settings can improve your pictures. Please follow the steps below to configure the settings: 1. Press the screen. Exposure Compensation Set up to adjust the picture brightness. In the case of a very high contrast between the photographed object and the background, the brightness of the picture can be appropriately adjusted.
ISO Shutter Adjustment ISO allows you to set the sensitivity of the camera sensor. Please use a higher ISO value in darker places and a lower value in brighter conditions. (Adjustable in Mode). For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed so as to obtain a most suitable exposure value. The movement of object may be shown by adjusting the shutter speed.
Aperture Adjustment Using Quick Recording You can adjust the aperture size value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. (Adjustable in Mode) In shooting mode, press the recording video. F2.8 1/50 0.3 EV 400 ISO button to begin After recording, press the button again or press the Shutter button to stop recording.
i Button Function Menu The Image Color Setting allows you to select different color effects. This function can be adjusted in mode, please follow the steps below to configure the settings: 1. Press the button to select the Image Color Setting Menu. C /A C button to select 2. Press the A the Image Color Setting options. ( Normal ) represents optional in Movie mode.
Playback Mode Viewing Photos and Videos To view photos and videos on the LCD: 1. After pressing the 2. Use the A button, the last photo or video clip taken will be displayed on the LCD. C /A C button to scroll through the photos or video clips stored in the internal memory or on the memory card. 3. To play a selected video clip, press the button to enter the Movie Playback mode. During video playback, the operating instructions will appear on the screen.
Thumbnail View When in Playback Mode, rotate the Zoom Lever counter clockwise to the thumbnail images of the photos and videos on the screen. W Zoom Out position to display T Zoom In 1. Slide the Zoom Lever to switch between 3x3 and 4x4 thumbnails. 2. Press the A press the C /A C /A C /A C buttons to select a picture or video clip to view and button to restore it to the original size. When the icon 66 appears, it means this is a video file.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the Zoom Lever to zoom in on the photos 2 to 8 times. 1. Press the 2. Press the A button to switch to Playback mode. C /A C button to select a picture to be zoomed in. 3. Rotate the Zoom Lever clockwise to to zoom in. 4. The screen will display the number of times and area of the photo zooming operation. C /A 5. Press the A be zoomed in. 6.
Photos and Video Deletion In Playback mode, press the A C button to delete your photos and videos. To delete photos or videos: 1. Press the 2. Press the A 3. Press the A button to switch to Playback mode. C /A C button to select the photos and videos to be deleted. C button and the deletion screen is displayed. Delete One Exit 4. Press the A to confirm. C /A C button to select 「Delete One」or「Exit」and press the Erased photos/video clips cannot be recovered.
Slideshow This setting allows you to view all the stored images as a slideshow. 1. Press the button to enter playback screen. 2. Press the button to enter slide option. C /A 3. Press the A playback screen. C button to select slideshow playing or「Cancel」to return to the Cancel 4. Press the button to confirm the setting. The continuous capture group playback may be displayed by slideshow. Pictures rotate automatically during a slide show. Slide playing function supports movie playing.
Continuous Capture Group Playback Cont.Shot-High Speed (VGA) and Cont.Shot-Fast (4M) can make continuous capture for group image playback. 1. Press button to enter playback screen. 2. Press the A 3. Press C /A C button to select Cont. Group. to start playback.
Animation panorama play Panoramic animation playing is to play full size image in accordance with the shooting direction. After playing, it will automatically return to the static screen of panoramic image. 1. Press the 2. Press the A 3. Press the button to enter playback screen. C /A C button to select animated panoramic photos. button to play in selected shooting direction. In the process of panoramic animation playback, press the A playing and return to the playback screen.
Using the Menus Photo Setup Menu Mode: 1. In Photo Shooting Mode, press the button to enter the Photo Setup menu. Expo Metering Use this setting to select the “target” size of the camera’s field of view to be metered. C button to C /A 2. Press the A select the item to be set. • C /A C button to 3. Press the A select an option and press the button to confirm. Refer to the following pages for more details about each setting.
Image Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality. • Size: Poster printing • 5M Size: A3 printing • 3M Size: A4 printing • 2M Size: 4”x 6” printing • Size: E-Mail The larger the number of recorded pixels, the larger the file size and the fewer files that can be saved on your memory card.
OIS (Optical Image Stabilization) Cont. AF This mode can help reduce photo blur caused by unintentional hand shake and low light . Enable the continuous AF to be able to continuously focus automatically when taking pictures. • OIS: Off • OIS: On Use this image stabilization mode in dark environments. Shooting in a windy or unstable environment (such as a moving vehicle) may cause blurred images. 74 • Cont.AF: Off • Cont.
HDR Beautifier Use this setting to control wide dynamic image range when taking static pictures. Photos with extreme contrast of bright and dark areas will still maintain distinguishable detail and depth. (Suggest using tripod) Set the effect of the face beautifier mode.
Scene Select the scene mode under the SCN mode.
Photo Shooting Settings Menu Mode: 1. Press the . button in Photo Shooting mode and press the A 2. Press the button to enter the menu. 3. Press the A C /A C button to select , and press the C /A /A C button to select C button to enter the menu. C /A 4. Press the A to enter the menu. C button to select the item to be set and press the 5. Press the A C button to select an option and press the C /A /A C button button to confirm.
Quality AF-Assist Beam The Quality Setting can be used to adjust the image compression ratio. In a darker environment, AF Assist Beam can be turned on for better focus. Quality Best Fine Off AF Assist Beam On Normal There are three options for picture quality: • Best Digital Zoom Turn on or off the digital zoom.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD based on the selected time.
Custom Settings Custom Settings stores the current photo shooting mode or scene mode and its parameters. The stored mode and parameters are directly invoked in mode. Custom Settings In mode, select「Custom Settings」 the camera will enter the setting interface as shown below: Select one capture mode to define CS . Reset camera settings to custom settings mode.
Movie Menu Mode: Expo Metering 1. Rotate the mode dial to select and press the button to enter the Movie menu. Use this setting to select the “target” size of the camera’s field of view to be metered. Expo Metering: AiAE C /A 2. Press the A the item to be set. C /A 3. Press the A option and press the Expo Metering: AiAE C button to select • AiAE (Artificial Intelligence AE) For automatically selecting the central and surrounding metering to weight a proper metering value.
Movie Size Set the image resolution used during video recording. Size: 1080p 30fps • Size: 1080p 30fps • Size: 720p 60fps • Size: 720p 30fps • Size: 640x480 30fps • Size: High Speed Movie The speed requirements for reading and writing high image pixel images to SD card are as follows: 82 No.
OIS (Optical Image Stabilization) * The longest recording time is 29 minutes at one time. This mode can help reduce photo blur caused by hand shake and low light. When recording in higher pixel resolutions for extended periods of time, this can cause the camera to generate heat. This is not a camera malfunction. 5/9 5LL When the video format is set as 640x480 (120fps), shooting time is 30 seconds, playback time is 2 minutes. Sound recording is disabled when 640x480 120fps is chosen.
Movie Setting Menu Mode: 1. Rotate the Mode Dial and select button, press the A 2. Press the to enter the menu. to enter the video recording screen. C button to select C /A , and press the button Press SET To Enter Menu 3. Press the A menu. C /A C button to select 4. Select the item to be set and press the 5. Press the A 84 C /A /A , and press the /A C button to enter the C button to enter the menu. C button to select an option and press the button to confirm.
Digital Zoom Custom Settings Turn on or off the digital zoom. Custom Settings stores the current movie mode and its parameters. The stored mode and parameters can be invoked directly in mode. Digital Zoom Off On Custom Settings Reset camera settings to custom settings mode.
Playback Menu Mode: Playback Mode 1. Press the button to display the playback screen and press the button to enter the menu. Select , and press the settings screen: button to enter the C /A C button to 2. Press the A select the item to be set and press the button to enter. C button to select C /A 3. Press the A an option and press the button to confirm. Press SET To Confirm Normal Mode: Display all images. • Normal Mode: Display all images. • Date Mode: Arranged by date. • Cont.
HDR Touch-up With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. The playback beauty feature allows for beautification using three individual effects.
Rotate Resize You can use this setting to change the orientation of the picture. This setting allows you to resize a picture to a particular resolution and saves it as a new picture. Select , and press the the settings screen: button to enter Turn Right Resize to 1024x768 Turn Left Resize to 640x480 Cancel Cancel The rotated picture file will replace the original photo. button to enter Resize to 1024x768 Turn Right Videos and panoramic pictures cannot be rotated.
Color This setting allows you to change the picture color effect. The file is saved as a new photo and stored in memory together with the original photo.
Playback Settings Menu Mode: 1. Press the A button to show the playback screen, press the button, press the A , and press the button to enter the menu. C/ C button to select 2. Press the A menu. C /A C button to select , and press the /A C button to enter the Protect Delete DPOF Trim C /A 3. Press the A to enter the menu. C button to select the item to be set and press the 4.
Protect To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. One Protect Date Folder Cont. Group Reset All Reset There are 5 options available: • One: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • Date Folder: Protect all photos in the Date Folder. • Cont. Group: Protect all photos in the Cont. Photo Folder. • All: Lock all photos or videos.
Delete You can delete one or all photo/video files. One Delete Date Folder Cont. Group All There are 4 options available: • One: Delete one photo or video. • Date Folder: Delete all photos in the Date Folder. • Cont. Group: Delete all photos in the Cont. Photo Folder. • All: Delete all photos or videos The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. Deleting files will cause DPOF settings to be reset. When one photo in the Cont.
DPOF (Digital Print Order Format) Trim The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the SD memory card to print without having to individually specify the photos you want to print. The Trim Setting allows you to crop photos and save them as new pictures. 1. Select「Yes」to confirm trim.
General Settings Menu Mode: 1. Press the button in any mode, press the A button to enter the menu. 2. Press the A menu. C /A C button to select C /A C button to select , and press the /A , and press the C button to enter the Sound Settings Power Saver Language Auto English World Time Home Date & Time 2014.06.20 00:00 C /A 3. Press the A to enter the menu. C button to select the item to be set and press the 4.
Sound Settings Power Saver With this setting you may adjust the sound volume. This setting allows you to save power and get the maximum possible running time for your camera’s batteries. Turn the LCD and camera off automatically after a consecutive period of inactivity. C button to adjust the C /A Press the A volume and press the button to confirm our setting.
Language Date/Time Refer to the “Reset your language” section on page 25. Refer to the “Reset Date/Time” section on page 26. Zone LCD Brightness The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. Use this setting to adjust the brightness of your LCD. C /A 1. Press the A the departure place ( ( ) fields. C button to select ) and destination C button to select a C /A 2.
File Settings Mode: 1. Press the button, press the A enter the menu. 2. Press the A menu. C /A C/A 3. Press the A to enter the menu. C /A C button to select C button to select and press the and press the /A button to C button to enter the C button to select the item to be set and press the /A C button Format Copy to Card File Numbering Reset FW Version 4. Press the A X.XX C /A C button to select an option and press the button to confirm.
Format Copy to Card Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files. Use this setting to copy the files stored in the built-in memory to a memory card. Format Doing so will clear all data. Copy to Card Copy files from built-in memory to the memory card. No No Yes Yes If there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, it will be formatted only.
File Numbering Reset After you take a picture or video clip, the camera will save it with a sequential number. You can use this to reset the file numbering to 1. Use this setting to restore the camera to its original default settings. File Numbering Create a new directory and reset the file number. No Yes Reset Reset camera settings to factory defaults.
FW Version Use this setting to view the current camera firmware version. FW Version Current Ver:1.XX When there is a new firmware version in the memory card, select「Yes」to update. FW Version Current Ver:1.XX New Ver.:2.
Connection Settings Mode: 1. Press the button, press the A enter the menu. 2. Press the A menu. C /A C /A 3. Press the A to enter the menu. USB C button to select C button to select and press the and press the /A button to C button to enter the C button to select the item to be set and press the /A C button PC TV-System NTSC Off Eye-Fi 4. Press the A C /A C /A C button to select an option and press the button to confirm. Refer to the following pages for more details about each setting.
Connecting to a Computer You can use the Micro USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s Micro USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the A the menu. C /A C button to select「USB」and press the 2.
Transferring files to your computer The computer will automatically detect the camera as a removable drive. Double-click the My Computer icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer. 1. Make sure the computer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. 3.
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner’s manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied Micro USB cable, without the need for a PC. C button to C /A 2.
Connecting to your Printer 1. Make sure the printer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge menu will appear. PictBridge Print (with Date) Print (without Date) Print Index Print DPOF Images Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」and the screen as shown below appears. Exit C button to select a C /A Press the A C button to menu item and press the /A enter the item.
Print (without Date) C button to select C /A 3. Press the A the number of copies for the currently displayed photo. 4. Press the button and the following screen will appear. Use this setting to print the photos without dates on them. 1. In the PictBridge menu, select「Print (without Date)」and the screen as shown below appears. Print (with Date) Yes Cancel 5. Select「Yes」and press the button to confirm printing; select「Cancel」and press the button to cancel printing. 01 Back C /A 2.
Print Index 4. Press the button and the following screen will appear. Print (Without Date) Yes You can print all photos in the camera via this function. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. Print Index Cancel Yes Yes 5. Select「Yes」and press the button to confirm printing; select「Cancel」and press the button to cancel printing. Cancel 2. Select「Yes」and press the button to confirm printing; select「Cancel」and press the button to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 93. Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」 appears on the screen. 1. In the PictBridge menu, select「Print DPOF Images」and the screen as shown below appears. Remove USB Cable! Print DPOF Images Yes Cancel Disconnect the Micro USB cable from the camera and printer. 2.
Video System You can use the AV cable (which should be purchased separately) to connect the camera and the television for realizing the video output. Connect one end of the AV cable to USB/AV port of the camera; connect the other end to AV-OUT port of the television. Adjust the format of the video output system according to your requirements, and the steps are as follows: C /A 1. Press the A enter the menu. C button to select「TV-System」and press the 2.
Set Eye-Fi SD Card Connection Mode This camera supports the wireless connection for Eye-Fi memory card, Enable Eye-Fi connection by following below steps. 1. Press the A the menu. C /A C button to select「Eye-Fi」and press the 2. Press the A confirm. C /A C button to select「On」or「Off」and press the /A C button to enter button to Off On Eye-Fi If the Eye-Fi card is not available in the camera, this feature is not displayed.
Supported HDMI Connections HDMI (High Definition Multimedia Interface) is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Direct transmission of digital video signals to your TV reduces conversion loss and improves image quality. Connecting HDMI-Ready TV 1. Use the cable with high resolution output terminal (which should be purchased separately) to connect the camera to the television which meets HDMI standard. 2.
Appendices Product Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3”BSI CMOS Effective Pixels 16.35 Megapixels Total Pixels 16.76 Megapixels Focal Length 4.3mm (Wide) — 223.6mm (Tele) 35mm film equivalent 24mm (Wide) — 1248mm (Tele) F number F2.8 (Wide) ~ F5.
Number of Recording Pixels Still Image Movie (3:2) (16:9) 16MP: 4608 X 3456 10MP: 3648 X 2736 5MP: 2592 X 1944 3MP: 2048 X 1536 0.3MP: 640 X 480 14MP: 4608 X 3072 12MP: 4608 X 2592 2MP: 1920 X 1080 1920 X 1080 (30fps), 1280 X 720 (60fps/30fps), 640 X 480 (30fps), High-Speed Movie: 640 X 480 (120fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 114 (4:3) Still Image Exif 2.3 (JPEG) Movie MOV [Image: H.
Scan Panorama Up to 360° LCD 3.
Recording Media 116 Internal Memory: Approx. 8MB SD/SDHC Card (Up to 32GB Support) [MMC Card Not Supported] PictBridge, ExifPrint Support Yes Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.0 (Micro 5 pin USB), HDMI (Type D) Eye-Fi Support Yes Wi-Fi Yes (802.11b/g/n) Remote Viewfinder Yes (via smart device) Power Rechargeable Li-ion Battery LB-060, 3.7V 1100mAh, In-Camera Charging Shooting Capability (Battery Performance) Approx.
Prompts and Warning Messages Message Description Action Warning! Battery exhausted. Warning before power off when the camera battery is exhausted. Displaying that it will power off after 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn off the camera and restart it to reset the lens. Suggest using tripod.
Message 118 Description Action Remove USB Cable! Indicates that you can disconnect the Micro USB cable. The message disappears after you disconnect the Micro USB cable. Connection Failed! Failure to connect to your PC, printer, TV (with HDMI). Remove the cable and retry connection. Write Protect ! When you boot, press the shutter button or edit the files under playback mode, and the SD card is locked, the message appear. The message will disappear after 2 seconds.
Message Description Action Card Error ! The memory card can’t be identified after being formatted. Normal display. Card is not formatted. When an error occurs in the SD card, the message “Not Formatted” appears. Disappear after 2 seconds and enter the formatting process. Slow access When a SD card lower than Class 4 is used to record a HD movie, the writing speed will be slower and recording will not continue. Remove the message after 2 seconds and return to shooting. Cannot write to SD card.
Message 120 Description Action Exceeded maximum folder number. When you boot, press the shutter button or edit the files under playback mode, and the SD card exceeded the maximum number of folders (999), the message appear. The message will end after the camera processing is complete. Too many pictures for fast processing. During the playback by date, the images exceed specifications so that it is not possible to play by date.
Troubleshooting Problem Possible Causes Solution Camera does not turn on The battery has been depleted. The battery is not inserted correctly. Recharge the battery. Correctly reinstall the battery. Camera turns off suddenly during operation The batteries have been depleted. Recharge the battery. The picture is blurred Camera shakes while taking a picture. Turn on OIS feature. Please use tripod for high magnification (above 15X) optical zoom.
Problem Saving data to memory card is slow Cannot write to the memory card Too many movies to process Possible Causes Solution Using a memory card below Class 4 may result in slower recording times. Use an SD card with write Class higher than 4 to improve performance. The SD memory card has been locked. Release the write lock of the memory card or replace with another card. The camera may experience trouble recording HD movies to SD cards with a rating lower than Class 4.
Licensed Product The Kodak trademark and trade dress are used under license from Kodak. © 2014 by JK Imaging Ltd. All rights reserved. JK Imaging Ltd. 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK www.kodakpixpro.com Ver.
