KODAK PIXPRO AZ652 DIGITAL CAMERA User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA JK Imaging Europe, 71 Clarendon Road, Watford, WD17 1DS, UK Company Website: kodakpixpro.com INDUSTRY CANADA This device complies with Canadian RSS-210. This device complies with Industry Canada license-exempt RSS standard (s).
For Customers in Europe This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems available in your country for proper, safe disposal of this product. 2 “CE” mark indicates that this product complies with the European requirements for safety, health, environment and customer protection.
- EN 300 328 V1.9.1 : 2015 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4GHz ISM band andusing wide band modulation techniques; Harmonized EN covering the essential requirements of article - EN 301 489-1 V1.9.2: 2011 Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd.
SAFETY NOTES 6 Safety Notes for this Camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to help prevent dust or sand from entering the camera, causing possible damage. Do not use or store the camera in a hot environment or in direct sunlight. Do not use or store the camera near powerful magnetic fields, for example near a magnet or transformer.
Safety Notes for Battery Please use a battery that is the same type as the one included. Do not heat the battery or throw it into a fire to avoid a possible explosion. Please use the attached charger to charge the battery. Do not store the battery in a hot environment or in direct sunlight. If battery fluid leaks inside the camera, contact our customer service department immediately. If battery fluid leaks onto your skin, rinse your skin immediately with clean water and seek immediate medical attention.
8 Safety Notes for Memory Card We highly suggest buying only wellknown, name brand memory cards to ensure peak performance and reliability. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline and FAA regulations. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
CONTENTS BEFORE YOU START.............. 1 SAFETY NOTES..................... 6 CONTENTS............................ 10 GETTING READY.................... 14 LCD Display......................................27 Overview of the Screen Icons in Shooting Mode..........................27 Overview of the Screen Icons in Movie Mode................................29 Accessories Included.......................14 Overview of the Screen Icons in Playback Mode...........................
AF Area.............................................55 Macro Mode.....................................56 Self-Timer Mode ..............................57 Flash Mode ......................................58 PLAYBACK............................. 71 Viewing Photos and Videos.............71 Thumbnail View................................72 WB (White Balance) Mode ...............60 Using Zoom Playback (for still pictures only)....................................73 Continuous Shot Mode....................
Movie Size..................................83 Touch-Up Quality........................................84 Resize ..................................97 MF (Manual Focus) Assist..........85 Playback Settings ............................97 AF Assist Beam...........................86 Protect........................................98 Digital Zoom...............................86 Delete.........................................98 Shoot Setting 2................................87 Date Imprint.............
Copy to Card..............................106 Exit..............................................115 File Numbering...........................106 Video System...................................116 Reset Settings............................107 Supported HDMI Connections........117 Version........................................107 Connecting HDMI-Ready TV......117 CONNECTION SETTINGS....108 Connecting to a Computer..............108 Setting the USB Mode...............
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer first or our customer service center (Based on sales in different countries or regions, the shape of the AC adapter will vary. Please subject to the actual product will prevail.
Installing Lens Cap and Neck Strap 15
Part Names 4 5 6 7 8 9 1. Micro HDMI Port 10 2. Micro USB Port 3. Zoom Lever 11 4. Shutter Button 5. Strap Eyelet 3 2 1 6. Exposure Compensation Button 7. Continuous Shot Button 8. Power Button 9. AF Assist Beam/Self-Timer Lamp 10. Flash Lamp 11.
12. Microphone 13. Electronic View Finder (EVF) 5 12 13 14 15 14. EVF / LCD Switch Button 15. Indicator Lamp 16 17 18 16. Mode Dial 17. Fast Video Recording Button 18. Menu Button 19. Jog Dial [ 19 [ [ 23 22 21 20 [ ] AF Button/Up Button ] Delete Button/Self-Timer Button/Down Button ] Macro Button/Left Button ] Flash Button/Right Button 20. Display Button 21. Playback Button 22. SET Button 23.
24. Vari-angle LCD 25. Diopter Adjustment Knob 26. Speaker 27. Lens Function Ring Lever 28. Lens Function Ring 28 27 26 25 24 29. Battery Cover 30.
Installing Battery and Memory Card 1. Open the battery cover door. 1 2 2. Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the picture. Push the battery down until it locks in place.
3. Insert the memory card into the memory card slot as shown in the diagram: 4. Close the battery cover door. 1 Write Protection Toggle Switch 2 A memory card (SD/SDHC/SDXC) is optional and not included in all camera packaging. It needs to be purchased separately. Please use an original memory card which is Class 4 or higher and has a capacity of 4GB to 256GB. To remove your memory card, open the battery cover door, gently press the memory card to eject it and remove it carefully.
Charging the Battery Please insert the battery and charge it under shutdown mode. 1. Connect the camera to the power charger using the supplied Micro USB cable. 2. Insert the plug of the power charger into the power outlet to charge the battery. 2 After the battery is stored for long periods of time, use the supplied power charger to charge the battery prior to use.
Vari-angle LCD The LCD is housed in the camera’s body. You may follow the directions shown below to move it as needed: 2 3 1 4 1. Turn on the LCD along the direction shown by arrow ①. 2. Available to rotate 180° along the direction shown by arrow ②. 3. Available to rotate 90° along the direction shown by arrow ③. 4. Turn off the LCD along the direction shown by arrow ④. Please don’t rotate the LCD with excessive force to prevent damages.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button When the power is off, press and hold the playback enter Playback mode.
Set your Language, Date/Time Set your Language, Date/Time after the First Power-On 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the [ ]/[ ] button to select your desired language. 3. After you press the button to confirm your language selection, the Date/Time settings screen will appear. Language Sound Settings Soun য檥Иކ Power Saver Powe World Time Home 䚐ạ㛨 Date & Time 2017.04.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. 1. Press the button, press the [ ] /[ ] button to select and press the button to enter the menu. 2. Press the [ . ]/[ ] button to select 3. Press the [ ]/[ ] button to select [Language] and press the button to enter the menu. 4. Press the [ ]/[ ] button to select your desired language and press the button to confirm. 5. Press the button and the shooting screen will appear.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, press the [ ] /[ ] button to select , and press the button to enter the menu. 2. Press the [ select . ]/[ ] button to 3. Press the [ ]/[ ] button to select [Date & Time] and press the button to enter the menu. Sound Settings Power Saver 6. Press the button and the shooting screen will appear. 26 English World Time Home Date & Time 2017.04.
MODE OVERVIEW LCD Display Overview of the Screen Icons in Shooting Mode 1 2 34 5 6 7 8 9 10 11 00:00:00 0000 12 13 14 15 16 x3.0 17 18 EV-0.0 1 F00.
00:00:00 32 0000 x3.0 31 30 29 28 27 26 EV-0.0 F00.
Overview of the Screen Icons in Movie Mode 1 00:00:00 4 3 00/15 2 1 Battery Status 2 Number of Videos Captured 3 Continuous Recording Time 4 Movie Mode 29
Overview of the Screen Icons in Playback Mode 1 2 3 4 5 6 7 2016/04/18 000-0000 16 15 14 13 8 0000 x2 Thumbnail3x3 1 30 9 10 11 12 Eye-Fi ON (with signal) 9 2 Quality 10 Zoom Magnification Area 3 Capture Date 11 4 File Name 12 Index Prompt 5 Shooting Pixel Ratio 13 Touch-Up 6 Image Size 14 HDR 7 Battery Status 15 DPOF File Icon 8 Continuous Shot Group Playback 16 File Protection Icon Image Area Image Zoom Ratio
How to Take Pictures 1. Hold the camera with both hands, being careful to not block the flash and lens with fingers. 2. Point the lens toward the object you want to take a picture of, and then frame it with the LCD. 3. Use the Zoom button to select Tele or Wide positions to zoom in or out on your subject. 4. Press the shutter button halfway to focus on the subject. When the focus frame turns green, press the shutter button down completely to take the picture.
Using the Mode Dial This camera provides a convenient Mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name 32 Icon Description Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures.
Manual Mode This mode is for manually setting the aperture, shutter speed and ISO value. Face Beautifier This mode automatically enhances facial features with skin softening touches and eye brightening capabilities. Wi-Fi Mode Enable image transmission and remote control by connecting smart device with Wi-Fi. Scene Mode Choose from 14 different pre-set scene types and effects for your photos. Movie Mode Record videos.
Please refer to the table below if any nonadjustable options in mode: (O: Available X: Unavailable) Options Mode Aperture Shutter EV ISO X (Display) X (Display) O O X (Display) O O O O X (Display) O O O O X (Display) O 1. Turn the mode dial to select the 2. Press the 3. Press the [ 4. Press the [ 5. Press the 34 mode you want. button to configure settings. ]/[ ]/[ ] button to select an adjustment setting. ] button to adjust the parameters.
Face Beautifier 1. Turn the Mode dial to select Face Beautifier Mode ( 2. Press the button and press the [ ]/[ ). ] button to select . 3. Press the [ ]/[ ] button or rolling the jog dial to select an option and press the button to confirm and enter the shooting screen.
Wi-Fi Mode Enable image transmission and remote control by connecting smart device with Wi-Fi. Matters needing attention before use: Your smart device operating system version needs to be iOS 8 or higher, or ANDROID 4.2 or higher. If not, please upgrade your smart device before using the App. Please do not use in places having high intensity magnetic field, electrostatic and electric wave interference (for example near a microwave oven), which may cause failure in receiving signals.
AP Mode 1. Rotate the mode dial to and then enter the Wi-Fi selection interface. 2. Press the [ ]/[ ] button to select and set options. Wi-Fi Mode Settings Station AP mode In AP mode, the camera will act This camera may connect with your smart device through Wi-Fi. Settings of Camera: 1. Select and press the button to enter the setting interface. 2. Press the [ ]/[ ] button to select options to be adjusted, and press the button to enter the option setting interface.
Station Settings of Smart Device: 1. Enable the Wi-Fi of smart device and then search surrounding wireless devices. 2. Select the name of camera SSID to be connected and then input the eightdigit number password after WPA2-PSK on the camera. 3. Click the icon of the APP the APP. to enable Set up completion: Once the APP is connected to the camera, functional operations can be enabled on the smart device.
Press the [ ]/[ ] button to select: Enter Password • Scan: Search again surrounding wireless devices. • : Select the name of device to be connected. A/a #!? • Back: Back to Wi-Fi mode select screen. 4. Press the [ ]/[ ]/ [ ]/ [ ] button or rolling the jog dial to select and then press the button to confirm your selection. Enter the completion of WPA2- PSK after password storage.
Display of Wi-Fi Connection Status: 5. Connect to network after storing the password. • If connected, the LCD will display as shown below: The Wi-Fi has successfully connected but APP is not enabled. Wi-Fi Mode Wi-Fi Mode AP mode AP mode Connected with device Station Connected with device MAC address: xx:xx:xx Disconnect SSID: XXXXXXXX Disconnect • If connect failed, please check Wi-Fi device and try again. 6.
For interrupting the connection: Wi-Fi Mode Disconnect from device? No Setting The name of this camera can be changed through key stroking. 1. Select the and then press the button to enter the setting interface. 2. Press the [ ]/[ ] button to select options to be adjusted and then press the button to enter the menu. Yes DSC device • No: Keep Wi-Fi connected and back to previous page. PIXPRO AZ652_XXXX MAC address 38:67:93:XX:XX:XX • Yes: Disconnect and back to Wi-Fi connection screen.
DSC Device App Operating Instructions The default name of DSC device is [PIXPRO AZ652_XXXX]. Change the name of DSC device through key stroking. Refer to the "PIXPRO Remote Viewer User Manual" located on the web: Americas DSC device PIXPRO AZ652_XXXX $ D #!? Name between 1-18 Letters Save Cancel For the method of input, please refer to the introduction on password input on page 39. http://kodakpixpro.com/ Americas/support/downloads.
Scene Mode You can select your desired scene from the 14 scene modes according to the type of environment you are shooting in. The camera then automatically configures the most appropriate settings for the best possible photos. 1. Rotate the Mode dial to , then the LCD will display as below: Auto Scence The camera automatically detects the most suitable shooting scene. 2. Press the [ ]/[ ] button to select a scene, and press the button to confirm. 3.
Scene Auto Scene Description The camera automatically detects the most suitable shooting scene. Panorama Mode For shooting up to 360-degrees of landscape. Handheld Night Reduce blur when shooting low light/ illuminated scenes. 44 Multi Exposure Take several shots and overlap as a single image. Cat/Dog The camera automatically takes a picture when a dog or cat face is detected. Snow For subjects in the snow. Reduce underexposure. Party For subjects at night without using a tripod.
Auto Scene (ASCN) In “ASCN” scene mode, the camera can intelligently detect different environments and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Mode Name Description Auto The camera automatically adjusts the exposure and focus to ensure the best possible pictures. Landscape For landscapes, automatically adjusts the exposure to match the background.
Panorama Mode This feature allows you to capture a panoramic view that will have significantly more content than a single photograph. Follow the instruction arrow with a smooth and steady movement of the camera to seamlessly shoot an ultra-wide scene of up to 360 degrees. Follow the steps below: 1. Select the Panorama Mode ( ) and then press the button to confirm. 2. Press the [ ]/[ ]/[ ]/ [ ] button to select a desired shooting direction.
During panorama mode shooting, press the button to interrupt shooting and save the current pictures taken. Press the [ ] button to cancel shooting and not to save the previously taken pictures. During panorama mode shooting, when the moving direction of the camera is wrong or the angle deviates from the internal settings, the LCD shows a warning message [Improper alignment. Please try again.] and the current pictures taken are saved.
Functions that can be adjusted in each scene are as below: Scene Adjustable Functions Auto Scene Flash*1/Self-Timer Panorama Mode None Handheld Night Expo Metering/Self-Timer*2 Multi Exposure Expo Metering Cat/Dog Auto Shooting/Continuous Shot/Expo Metering/Macro Snow Continuous Shot/Expo Metering/Flash/Self-Timer Party Continuous Shot/HDR/Expo Metering/Flash/Self-Timer/Macro Sport Continuous Shot/Expo Metering Night Portrait HDR/Expo Metering/Self-Timer Portrait Continuous Shot/HDR/Exp
Custom Settings ( ) The user can store frequently used shooting modes; and parameters and switch to this mode for a quick adjustment. Settings under mode (unset state or state after reset): 1. Turn the Mode dial to select the mode, and enter the setup screen, as shown in the figure below: Select one capture mode to define CS . Auto Mode Confirm Exit 2.
5. Press the [ ] button select [Custom Settings] and press the button to enter the menu. Date Imprint Off Quick Review Off Cont. AF Off Face Detection Off Custom Settings Normal Function Ring (Smart) Select Set Exit 6. Select [Yes] to save or [No] to cancel. Custom Settings Set camera to user custom mode No Yes 50 7. Turn the mode dial to switch to the custom settings ( ). 8. The photo settings you stored the last time are used.
BASIC OPERATION Using EVF (Electronic View Finder) EVF functions as the LCD, which can be used to observe the scene and objects and for playback, preview and menu operations. EVF has the following advantages: It will not be affected by ambient light and may avoid poor composition due to light reflection on the LCD. 3. When the screen display is not clear, rotate the dioptric adjustment knob to adjust the screen sharpness. 4. Press the button again or restart the camera to switch back to the LCD display.
Using the Zoom Function Your camera is equipped with two types of Zoom functions: optical zoom and digital zoom. Toggle the Zoom lever of the camera to zoom in or out on the subject while taking pictures. Zoom Indicator x3.0 EV-0.0 F00.0 0/0000 ISO00000 When the Optical Zoom reaches the threshold as Digital Zoom, release and turn the Zoom lever to T to switch between the Optical Zoom and Digital Zoom.
Display Setting Mode: Press the screens. button to switch among 4 Function Message Display 00:00:00 No Message Display 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 Display with Grid and Histogram 00:00:00 0000 EV-0.0 F00.0 0/0000 ISO00000 Message Display x00.0 00:00:00 0000 x3.0 EV-0.0 F00.0 0/0000 ISO00000 EV-0.0 F00.
Mode: Press the button to display the playback screen, press the button to switch among 3 screens. Function Message Display No Message Display 0000/00/00 000-0000 :N[SHTGOR ^ Detailed Message Display 0000/00/00 000-0000 EV-0.0 000mm F00.
AF Area In different photo shooting modes, you can select different focus methods. (Adjustable in mode) 1. Press the [ ] button to display the settings screen. Center-AF Spot Focus Choose the single-point focus position within the scope of focus. Object Tracking: Smart tracking of the object in motion under the focusing shooting. 3. Press the button to confirm the settings and enter the shooting screen. After enabling spot focus, rolling the jog dial to adjust the position of focus point in the screen.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the [ ] button to enter the Macro Menu. Macro On 2. Press the [ ] button to select the following 2 modes: • Macro On Select this option to make focusing on the object closer to the lens (At the W side, the shooting distance should be more than 1 cm). • Macro Off Select this option to disable Macro. 3.
Self-Timer Mode Using this function can take photos at regular time. The camera can be set to shoot after 2 seconds, 10 seconds since pressing the shutter or with Shoot After Smile. 1. Press the [ ] button to enter the Self-Timer menu. Self-timer 2sec • Self-Timer 10sec A single picture is shot 10 seconds after the shutter button is pressed. • Self-Timer Smile Press the shutter button and a picture will be taken immediately after a smile is detected. • Self-Timer Off Disables the Self-Timer. 3.
Flash Mode When enabling the Smile Detection, pressing the shutter or the button can disable the Self-Timer and return to the shooting screen while keeping the Self-Timer smile setting. Self-Timer settings will remain after completion of shooting with the Self-Timer. They can be canceled by switching modes or by turning the camera off and then on again. The flash provides supplemental light for the scene.
• Fill Flash For fill flash at the moment of taking a picture. • Flash Auto Camera flash goes off automatically based on existing light conditions. • Red-Eye Reduction The camera emits a brief pre-flash before the picture is taken to reduce redeye effects. • Slow Sync. This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. The use of a tripod is recommended when shooting with this setting. • Slow Sync.
WB (White Balance) Mode The white balance function allows adjustment of the color temperature for different light sources. (Adjustable in Mode) • AWB • Daylight • Cloudy Follow the steps below to set white balance of the camera: • Fluorescent 1. Press the button to enter white balance menu. • Fluorescent H • Incandescent • Manual WB Set WB according to the current light source, press the button to set. • Color Temp.
WB Bracketing: Press the button to enter options and then press the [ ]/[ ]/ [ ]/[ ] button to adjust the shift and rolling the jog dial to adjust the BKT value (0, 1 and 2). Rotate clockwise to adjust X axis (B-A). BKT value Rotate counterclockwise to adjust Y axis (G-M). BKT value Press the button to confirm your settings. WB Bracketing : BG±1 Shift B9 G2 BKT 1 Confirm WB bracketing is for setting the bracketing range. Shift to both sides for 3 spaces at most.
Continuous Shot Mode Functions that can be enabled under each mode may be different. • Continuous Shot For taking more than one picture continuously. For setting the single, continuous shot, Time-Lapse, HDR, WDR or AE bracketing functions. • Cont.Shot-Fast (2M) For continuous shot with 2M pixels. Please follow the following steps to set: • Cont.Shot-High Speed (VGA) For continuous shot with VGA pixel. • Time-Lapse Take pictures based on the preset interval (30sec/ 1min/ 5min/ 10min).
Mode: • • WDR (Wide Dynamic Range) When the camera detects that there is a big contrast in brightness between scenes and such scenes are against the light, it will automatically adjust the brightness and saturation to capture an image that better represents the scene. AE Bracketing (0.3EV, 0.7EV, 1.0EV, 1.3EV, 1.7EV, 2.0EV) The camera will automatically and continuously take three pictures separately with a brightness of original, darker and brighter as long as you press the shutter once.
Exposure Compensation Functions Setting The EV Function Menu of the camera includes functions, such as EV Adjustment, ISO, Shutter Adjustment, Aperture Adjustment, etc. Using the appropriate Function Settings can improve your pictures. Please follow the steps below to set: EV Adjustment Set up Exposure Compensation to adjust the picture brightness. If there is very high contrast between the photographed object and the background, the brightness of the picture can be adjusted as necessary.
ISO Adjustment Shutter Speed Adjustment ISO allows you to set the sensitivity of the camera sensor. Please use a higher ISO value in darker places and a lower value in brighter conditions. For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed so as to obtain a most suitable exposure value. The movement of object may be shown by adjusting the shutter speed.
Using Quick Recording Aperture Adjustment You can adjust the aperture size value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. (This can be adjustable in Mode) In photo shooting mode, press the button to begin recording video. 00:00:00 00/15 15 pictures at most can be taken by pressing the shutter when recording. EV-0.0 F00.
“i” Button Function Menu Functions that can be enabled are different under each mode. Mode: The image color setting allows you to select different effects. 1. Press the button to select the Image color setting menu. Normal 2. Press the [ ]/[ ] button to select the image color setting options.
Using the Lens Function Ring There is a lens function ring lever in one side of the lens. Moving it up and down can switch among ZOOM/AF, SMART and MF mode. 2. Rotate the lens function ring to optically zoom the object. Zoom/AF Mode x3.0 Rotate the lens function ring for optical zoom. 1. Switch the lens function ring lever to position . EV-0.0 F00.0 0/0000 ISO00000 Rotating the lens function ring in Zoom/AF mode is only for optical zoom. 00:00:00 EV-0.0 68 F00.
Function Ring (Smart) Mode Rotate the lens function ring to set parameters of aperture, shutter, ISO, EV, etc. 1. Switch the lens function ring lever to position . 2. Rotate the lens function ring or rolling the jog dial to select options needed. EV-0.7 EV+0.7 EV-0.3 EV-0.0 EV+0.0 F00.0 EV+0.3 0/0000 ISO00000 3. Press the button to complete the setting and enter shooting screen. The selection of functions of Function Ring (Smart) in the menu is needed before using Function Ring (Smart) mode.
MF(Manual Focus) Mode Rotate the lens function ring for manual focus. 1. Switch the lens function ring lever to position . 2. If the lens function ring is operated or rolling the jog dial, the focus enlargement frame will appear on the LCD. After clear focus is achieved through manual adjustment, press the button to close the focus enlargement frame. The camera will return to the normal shooting screen.
PLAYBACK Viewing Photos and Videos For viewing taken photos and videos on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Press the [ ]/[ ] button to scroll through the photos or video clips stored in the built-in memory or on the Memory Card. 3. To play a selected video clip, press the button to enter the movie playback mode. An operation guide appears on the screen when playing back a video.
Thumbnail View When in Playback Mode, rotate the Zoom lever counter to the position to display thumbnail images of the photos and videos on the screen. W Zoom Out T Zoom In 2. Press the [ ]/[ ]/[ ]/ [ ] button to select a picture or video clip to view and press the button to restore it to the original size. 3. As shown in the picture, press the button to select index mode. 4 options in [ Index Mode ] : • Single Index • Date Folder • Cont. Group 1.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the zoom lever to zoom in on the photos 2 to 8 times their original magnification. 1. Press the button to switch to playback mode. 2. Press the [ ]/[ ] button to select a picture on which to use the zoom feature.. 3. Rotate the Zoom lever to position to zoom in. 4. Rolling the jog dial clockwise to zoom in and counterclockwise to zoom out. 5.
Continuous Shot Group Playback High speed (VGA) and fast (2M) can make Continuous Shot for group image playback. 1. Press the button to enter playback screen. 2. Press the [ 3. Press the ]/[ ] button to select continuous group. button to start playback. 0000/00/00 000-0000 0000/00/00 000-0000 0000 00 00 00 00 Thumbnail3x3 Cont.
Animation Panorama Play Panoramic animation playing is to play full size image in accordance with the shooting direction. After playing, it will automatically return to the static screen of panoramic image. 1. Press the 2. Press the [ 3. Press the button to enter playback screen. ]/[ ] button to select animated panoramic photos. button to play in selected shooting direction.
Slideshow This setting allows you to view all the stored images as a slideshow. 1. Press the button to enter playback screen. 2. Rotate the Zoom lever counter to the position to display thumbnails 3x3 and then press the button to select the index mode. Slide show Back 3. Press the [ ]/[ ] button to select slideshow playing and then press the button to enter slide option. 76 4. Press the [ ]/[ ] button to select play effect and then press the button to confirm.
Deleting Photos and Videos In playback mode, press the [ ] button to delete your photos and videos. To delete photos or videos: 1. Press the 2. Press the [ 3. Press the [ button to switch to playback mode. ]/[ ] button to select the photos or videos to be deleted. ] button and the deletion screen is displayed. 4. Press the [ ]/[ button to confirm. ] button to select [Delete One] or [Exit] and press the Erased photos/video clips cannot be recovered.
USING THE MENUS Shooting Menu Mode: 1. In shooting mode, press the to enter the shooting menu.
Expo Metering OIS (Optical Image Stabilization) Use this setting to select the “target” size of the camera’s field of view to be metered. This mode can help reduce photo blur caused by unintentional shaking, or low light. OIS: On Expo Metering: AiAE • Spot For metering the block displayed in the center of the screen. • Center For metering the object in the center of the screen.
Beautifier Select Scene Select the effect for Face Beautifier Mode. Select the scene mode under the SCN mode. Beautifier:Effect 1 Select Scene Skin Soften .
Shoot Setting1 Mode: 1. Press the button, press the [ [ ] button to select . 2. Press the ]/ button to enter the menu. 3. Press the [ . ]/[ ] button to select 6 options in [Shoot Settings 1]: 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm.
Image Size The Size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the photo image quality.
Movie Size Set the image resolution used during video recording. Movie Size Image Size 20M Movie Size 1920x1080 30fps 1920x1080 30fps 1280x720 60fps Quality Qualit JPG G Fine 1280x720 30fps MF Assist As Off AF Assist Beam As Off 640x480 30fps 640x360 120fps Digital Digita Zoom Select Se Off Set Exit Total time of video recorded for each setting: No.
Quality * The longest recording time is 29 minutes at one time. When recording in higher pixel resolutions for extended periods of time, this can cause the camera to generate heat. This is not a camera malfunction. When the video format is set as 640x360 (120fps), shooting time is 30 seconds, playback time is 2 minutes. Sound recording is disabled when 640x360 120fps is chosen. The Quality setting can be used to adjust the image compression ratio.
If RAW or RAW+JPG is selected, the settings of Colour Effect, Continuous Shot, Cont.Shot-Fast (2M), Cont.ShotHigh Speed (VGA), HDR and AE Bracketing cannot be adjusted. 00:00:00 0000 The RAW file format provides lossless compression of the image data, which is not processed by the camera. The RAW file may be opened and modified using the image processing software, PhotoStudio Darkroom, that is located on the CD-ROM included with this camera. PhotoStudio Darkroom supports Windows 7/8/10 and Mac OS X (V10.
AF Assist Beam Digital Zoom In a darker environment, the AF assist beam setting can be turned on for better focus. This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
Shoot Setting 2 Mode: 1. Press the button, press the [ /[ ] button to select . 2. Press the ] button to enter the menu. 3. Press the [ select . ]/[ ] button to 6 options in [Shoot Settings 2]: 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option enables a brief review of images immediately after capture. Each picture will be displayed on the LCD screen per the selections below. Date Imprint Date Imprint Off Quick Review Off Cont. AF Off Face Detection On Off Date Date/Time Off Quick Review Off Cont.
Continuous AF Face Detection Use the Continuous AF setting to be able to continuously focus automatically when taking pictures. For detecting and focusing on faces to make all faces as clear as possible in photo mode. Face Detection Cont. AF Date Imprint Off Date Imprint Off Quick Review Off Quick Review Off Cont. AF Off Cont.
Custom Settings 2. Press the shutter button half-way down to focus. The LCD will show a green focus frame when the subject is in focus. Custom settings stores the current movie shooting mode and its parameters. The stored mode and parameters are automatically used in Custom Settings mode. Custom Settings Set camera to user custom mode No F2.9 3. Press the shutter button all the way down to take pictures. The closed eyes detection is usually on.
Function Ring (Smart) The options listed below can be set as Function Ring (Smart) Custom. Once set, the chosen function can be quickly adjusted with the lens function ring during shooting. Function Ring (Smart) Date Imprint Normal Off Quick Review Aperture priority Off Cont.
Playback Menu Menu Mode: 1. Press the button to display the playback screen and press the button to enter the menu. 7 options in [Playback Menu]: • Menu • Display Mode • Rotate • Color • HDR • Touch-Up • Resize 2. Press the [ ]/[ ] button to select the playback desired and press the button to enter. 3. Press the [ ]/[ ] button to select an option and press the button to confirm. Refer to the following pages for more details about each setting.
Display Mode Rotate You can use this setting to change the orientation of the picture. Date Folder Date Mode: Arranged by date. Exit Back Normal Mode: Display all images. Date Mode: Arranged by date. : Exit Cont. Photo Mode: Arranged by Cont. Photo Group. : Turn Left Slide Show : Turn Right The Date Folder is displayed in date order based on photo shooting date/ time. If there is no continuous shot image file in memory, continuous photo mode cannot be enabled.
Color This setting allows you to change the picture color effect. The file is saved as a new photo and stored in memory together with the original photo.
HDR With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. Exit : Exit Select with HDR : 0000/00/00 000-0000 Thumbnail3x3 After using the HDR function, the image will be saved as a new file and the original file is still stored in the memory.
Touch-Up The playback beauty feature allows for beautification using three individual effects. Select with touch-up: 0000/00/00 000-0000 Exit Thumbnail3x3 : Exit : Red-Eye Reduction : Skin Soften : Eye Brightening : Eye Enlargement The Touch-Up referred to is the individual use of three effects. Beauty Mode allows you to select one, two, or all three of the effects combined.
Playback Settings Resize This setting allows you to resize a picture to a particular resolution and saves it as a new picture. Mode: 1. Press the button, press the [ /[ ] button to select . 2. Press the 3. Press the [ select . Exit ] button to enter the menu. ]/[ ] button to 5 options in [ Playback Settings ]: • Protect • Delete • DPOF : Exit : Resize to 1024x768 : Resize to 640X480 Only for adjusting pictures with high resolution to those with low resolution.
Protect Delete To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. You can delete one or all photo/video files. Protect Protec One Protect Delete Delete Date Folder One Date Folder DPOF Cont. Group DPOF Cont.
DPOF (Digital Print Order Format) The “ ” indicator means a file is protected. File protection must be removed before a file can be deleted. Deleting files will cause DPOF settings to be reset. When one photo in the Cont. Group and Date Folders is protected, it will be kept but any other photos will be deleted. Deleted files will be permanently deleted and will not be able to be recovered or restored.
Trim The Trim setting allows you to crop photos and save them as new pictures. 1. Select [Yes] to confirm trim. Toggle the zoom lever or rolling the jog dial to select the aspect ratio and press the [ ]/[ ]/[ ]/[ ] buttons to adjust the part you want to trim. The picture after trimming cannot be trimmed again. Play Slide Show This setting allows you to view all the stored images as a slideshow. Play Slide Show Protect Prote Delete All Files Still Captures DPOF Videos Trim Cont.
General Settings Mode : 1. Press the button, press the [ /[ ] button to select . 2. Press the ] button to enter the menu. 3. Press the [ select . ]/[ ] button to 6 options in [General Settings] : • Sound Settings • Power Saver 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select an option and press the button to confirm. Refer to the following pages for more details about each setting.
Sound Settings Power Saver With this setting you may adjust the sound volume. This setting allows you to save power and get the maximum possible running time for your camera's batteries. Turn the LCD and camera off automatically after a consecutive period of inactivity. Press the [ ]/[ ] button to adjust the volume and press the button to confirm our setting.
Language Date & Time Refer to the “Reset your language” section on page 25. Refer to the “Reset Date/Time” section on page 26. World Time LCD Brightness The World Time setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. Use this setting to adjust the brightness of your LCD. 1. Press the [ ]/[ ] button to select the departure place ( ) and destination ( ) fields.
File Settings Mode: 1. Press the button, press the [ /[ ] button to select . 2. Press the button to enter the menu. 3. Press the [ select . ]/[ ] button to 5 options in [File Settings] : • Format • Copy to Card • File Numbering • Reset Settings • Version 104 ] 4. Press the [ ]/[ ] button to select the item to be set and press the button to enter the menu. 5. Press the [ ]/[ ] button to select [Yes] or [No] and press the button to confirm.
Format Please note: formatting enables you to delete all contents on the memory card and camera’s built-in memory, including protected photo and movie files. Format Doing so will clear all data. No Yes If you select [Yes] the camera formats its memory. IIf there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, only the memory card will be formatted.
Copy to Card File Numbering Use this setting to copy the files stored in the built-in memory to a memory card. After you take a picture or video clip, the camera will save it with a sequential number. You can use this to reset the file numbering to 1. Copy to Card Copy files from built-in memory to the memory card. File Numbering Create a new directory and reset the file number. No Yes No Yes If there is no card available in the camera, this function will not be displayed.
Reset Settings Version Use this setting to restore the camera to its original default settings. Use this setting to view the current camera firmware version. Reset Settings Reset camera settings to
CONNECTION SETTINGS Connecting to a Computer You can use a Micro USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s Micro USB port can be used to connect to either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the button, press the [ ] /[ ] button to select and press the button to enter the menu. 2. Press the [ select .
Transferring Files to your Computer The computer will automatically detect the camera as a removable drive. Doubleclick the “My Computer” icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your PC as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer: 1. Make sure the computer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. 3.
Connecting to a PICTBRIDGE™ Compatible Printer PICTBRIDGE™ technology allows printing on the photos saved in the memory card by a printer. To find out if a printer is PICTBRIDGE™ compatible, simply look for the PICTBRIDGE™ logo on the packaging or check the owner's manual for specifications. With the PICTBRIDGE™ function on your camera, you can print the captured photos directly to a PICTBRIDGE™ compatible printer using the supplied Micro USB cable, without the need for a PC.
Connecting to your Printer 1. Make sure the printer is turned on. 2. Connect one end of the supplied Micro USB cable to the Micro USB port on your camera. If the camera is not connected to a PICTBRIDGE™ compatible printer, the following error message will appear on the LCD. 3. Connect the other end of the cable to the USB port on the printer.
Using the PICTBRIDGE™ Menu After setting the USB mode to printer, the PICTBRIDGE™ menu will appear. PictBridge Print (with Date) Print (without Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PICTBRIDGE™ menu, select [Print (with Date)] and the screen as shown below appears.
Print (without Date) 3. Press the [ ]/[ ] button to select the number of copies for the currently displayed photo. 4. Press the button and the following screen will appear. Use this setting to print the photos without dates on them. 1. In the PICTBRIDGE™ menu, select [Print (without Date)] and the screen as shown below appears. PictBridge Print (With Date) Yes 01 Cancel Back 5. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing. 2.
Print Index PictBridge Print (Without Date) Yes Cancel 5. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing. You can print all photos in the camera via this function. 1. In the PICTBRIDGE™ menu, select [Print Index] and the screen as shown below appears. PictBridge Print Index Yes Cancel 2. Select [Yes] and press the button to confirm; select [Cancel] to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings before hand. See “DPOF” section on page 99. Select [Exit] to exit the PICTBRIDGE™ menu. At this time, the message [Remove USB Cable!] will appear on the screen. 1. In the PICTBRIDGE™ menu, select [Print DPOF Images] and the screen as shown below appears. PictBridge Remove USB Cable! Print DPOF Images Yes Cancel Disconnect the Micro USB cable from the camera and printer. 2.
Video System You can use the AV cable (which should be purchased separately) to connect the camera and the television for setting up the video output. Connect one end of the AV cable to AV port of the camera, and connect the other end to AV-OUT port of the television. To adjust the format of the video output system according to your requirements: 1. Press the button, press the [ ] /[ ] button to select and press the button to enter the menu. 2. Press the [ select . ]/[ ] button to 3.
Supported HDMI Connections HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Connecting HDMI-Ready TV 1. Use the cable with high resolution output terminal (which should be purchased separately) to connect the camera to the television which meets HDMI standards. 2. The camera will be automatically detected by the TV. 3. After connecting via HDMI, the camera enters Playback Mode.
HDMI CEC Control After connecting the camera with TVSystem, you may view pictures taken with the camera on the TV screen and operate the camera with your TV remote control to view and edit all images. Introduction on Icons 1. Info Hiding/Display 2. Zoom-in : Zoom in Images HDMI CEC Control USB Mode M Off PC TV-Sy TV-System NTSC On HDMI CEC Control Off : Zoom out Images 3. Rotate Images : Only Turn Left 4.
8. Videos 9. Movie Length:00:00:00 10. Cont. Group File 11. First Image Mark The following operations are available during HDMI CEC playback: • 1:1 Single Playback • Zoom-in Playback • Rotate 12. 000/000:Current Sorting/Total Number of Images in Group • Index Playback 13. :Confirm Effect • Slide Show Playback 14. :No Change • Video Play • Cont.
120 1:1 Single Playback: Pressing the left and right arrow buttons can switch among images. Zoom-in Playback: Under the 1:1 single playback mode, press the red button to zoom in images; press the red and green buttons on remote control to zoom out images. Rotate: Under the 1:1 single playback mode, press the blue button to rotate single picture.
Video Play: Press the down arrow button to delete one picture. Under the 1:1 single playback mode, select a video and then press the Press the left and right arrow buttons central button to start playing. While to edit the color. 12 effects in total for playing, you may use the arrow buttons selection. and the central button to perform The following beautifier touch-up operations such as fast forward/ functions cannot be enabled until a backward, pause, frame forward/ face is detected.
HDMI CEC Connection Function Full Size Playback Zoom-in Playback Index Playback Video Play Cont.
Set Eye-Fi SD Card Connection Mode This camera supports wireless connection for Eye-Fi memory cards. Enable the Eye-Fi connection by following the steps below. 1. Press the button, press the [ ] /[ ] button to select and press the button to enter the menu. 2. Press the [ select . ]/[ Eye-Fi USB Mode M Off PC TV-System TV-Sy NTSC On HDMI CEC Control Off Eye-Fi Eye-F On ] button to 3. Press the [ ]/[ ] button to select [Eye-Fi] and press the button to enter the menu. 4.
APPENDICES Product Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3” BSI CMOS Effective Pixels 20.68 Megapixels Total Pixels 21.14 Megapixels Focal Length 4.3 mm (Wide) — 279.5 mm (Tele) 35 mm Film Equivalent 24 mm (Wide) — 1560 mm (Tele) F number F2.9 (Wide) — F6.
Number of Recording Pixels Still Image Movie Image Compression (4:3) (3:2) (16:9) 20MP: 5184 × 3888 10MP: 3648 × 2736 5MP: 2592 × 1944 3MP: 2048 × 1536 0.3MP: 640 × 480 18MP: 5184 × 3456 15MP: 5120 × 2880 2MP: 1920 × 1080 1920 × 1080 (30fps), 1280 × 720 (60fps), 1280 × 720 (30fps), 640 × 480 (30fps), High-Speed Movie: 640 × 360 (120fps) Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image JPEG (Fine, Standard), RAW, RAW+ JPEG (Fine) Movie MOV [Image: H.
HDR Yes Scan Panorama Up to 360° LCD 126 Display 3.
White Balance Control Flash AWB, Daylight, Cloudy, Fluorescent, Fluorescent H, Incandescent, Manual WB, Color Temp. (1900K ~ 10000K) Flash Method Pop-up (Auto) Flash Modes Force Off, Fill Flash, Flash Auto, Red-Eye Reduction, Slow Sync., Slow Sync. + Red-Eye Reduction Internal Memory: Approx. 15MB Recording Media SD/SDHC/SDXC Card (Up to 256GB Support) [MMC Card Not Supported] Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.
Prompts and Warning Messages Message Description Warning! Battery exhausted. Warning before power off when the camera battery is exhausted. Displaying that it will power off after 2 seconds. Built-in memory error! In the case of built-in memory error. Disappear after 2 seconds and return to shooting. Warning! Do not turn The message appears during off your camera during the firmware update process. update! 128 Action The message disappears after the camera update and restart.
Message Description Action Cannot change settings under this mode. Appears during shooting mode if a function can not be set by rotating the function ring. Remove the message after 2 seconds and return to shooting. Improper alignment. Please try again. The offset is too big for panorama shooting. Remove the message after 2 seconds and return to shooting. Connection Failed! In the case of failing to connect to a PC or a printer.
Message Description Action Write Protect ! In the case that there is lock protection for the card when saving the image. Disappear after 2 seconds and return to the previous image. Card Full ! In the case that the camera detects the card capacity is insufficient when turning on or pressing the shutter. Disappear after 2 seconds and return to the previous image. Memory Full ! In the case that the camera detects the memory capacity is insufficient when turning on or pressing the shutter.
Message Slow access Description Action When a card lower than Class 4 is recording movie above HD, it may be accessed slowly and the recording cannot be continued. Remove the message after 2 seconds and return to the shooting image. The recording cannot be continued if there are problems which may cause Cannot write to SD Disappear after 2 seconds interruption of the recording during card. and return to shooting. writing to the card or recording in the process of shooting or recording.
Message 132 Description Action Too many pictures for fast processing. The image may be unable to enter the date playback if the image exceeds the specification in the case of date playback. Remove the message after 2 seconds and return to Thumbnail 3x3 mode. Unable to recognize files. When the format of the file viewed is not supported or the file is damaged and cannot be recognized properly. This message disappears only after the file is deleted.
Troubleshooting Problem Camera does not turn on Camera turns off suddenly during operation The picture is blurred Images and video files cannot be saved Possible causes The battery has been depleted. The battery is not inserted correctly. The batteries have been depleted. Camera shakes while taking a picture. The memory card is full. The memory card is locked. Images will not print from the connected printer The camera is not connected to the printer correctly. The printer is not PICTBRIDGE™ compatible.
Problem Possible Causes Solution Cannot write to the memory card The memory card has been locked. Release the write lock of the memory card or replace with another card. Too many movies to process The number of pictures or folders in the memory card exceed the specifications, so the playback of data folder can not be displayed. Delete unwanted files.
© 2017 JK Imaging Ltd. All Rights Reserved. The Kodak and Kodachrome, Kodacolor and Ektachrome trademarks, logo and trade dress are used under license from Eastman Kodak Company. All other logos, products or company names that are referred to in this document are trade names, trademarks or registered trademarks of their holders. The holders are not affiliated with JK Imaging Ltd., our products or our website. JK Imaging Ltd., 17239 So.
