User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK Company Website: www.kodakpixpro.com For Customers in the U.S.A. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd..
SAFETY NOTES Safety notes for this camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it. Do not use or store the camera in a hot environment or under direct sunlight. Do not use or store the camera near a powerful magnetic field, for example near a magnet or transformer.
Safety notes for battery If battery fluid leaks inside the camera, contact our customer service department. If battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention. Do not heat the battery or throw it into a fire to avoid a possible explosion. Disposal of used batteries should be carried out in accordance with the local (national or regional) regulations.
Safety notes for memory card We suggest buying only well-known, name brand memory cards to ensure peak performance. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on. Otherwise, the memory card could be damaged.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
CONTENTS BEFORE YOU START...................................... 1 MODE OVERVIEW......................................... 21 SAFETY NOTES............................................... 3 Display Setting............................................................. 21 LCD Screen Display..................................................... 22 CONTENTS....................................................... 7 GETTING READY............................................ 11 Accessories Included....................
8 Custom Settings.......................................................... 36 i Button Function Menu.............................................. 47 Landscape..................................................................... 37 PLAYBACK........................................................ 48 BASIC OPERATION......................................... 38 Viewing Photos and Videos....................................... 48 Using the Zoom Function...........................................
Photo Shooting Setting Menu................................... 58 Rotate..................................................................... 66 Quality................................................................... 58 Resize..................................................................... 67 AF-Assist Beam.................................................... 59 Color....................................................................... 67 Digital Zoom..........................................
File Numbering..................................................... 75 Print (without Date)............................................ 84 Reset....................................................................... 76 Print Index............................................................. 85 FW Version........................................................... 76 Print DPOF Images.............................................. 86 CONNECTIONS............................................... 77 Exit....
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.
Install lens cap and neck strap 12
Part Names 1. AF assist beam/Self-timer lamp 2. Flash lamp 3. Microphone 4. Lens 5. LCD 6. Exposure compensation button 7. Indicator lamp 8. i button 9. Menu button 10. Display button 11. Playback button 12. AF button/Arrow button (Up) 13. Flash button/Arrow button (Right) 14. Delete button/Self-timer button/ Arrow button (Down) 15. Macro button/Arrow button (Left) 16.
17. Strap eyelet 18. Micro USB port 19. Micro HDMI port 20. Zoom lever 21. Shutter button 22. Continuous shot button 23. Fast video recording button 24. Power switch 25.
26. Speaker 27. Tripod socket 28. Battery cover buckle 29 29.
Installing Battery and Memory Card 1. Open the battery cover. 16 2.
3. Insert the memory card into the memory card slot as shown in the diagram below: 4. Close the battery cover. Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. It needs to be purchased separately. Please use an original memory card which is Class 4 or higher and has a capacity of 4GB to 32GB. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully.
Turning Camera On and Off Slide the power switch to turn on/off the camera. Power Switch How to take pictures 1. Hold the camera with both hands as shown in the figure, not blocking the flash and lens by fingers. 2. Aim the camera at the object and then frame with the LCD. 3. Use the zoom lever to select Tele or Wide positions to zoom in or out on your subject. 4. Press the shutter button half way to focus on the subject.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the arrow buttons to select your desired language. 3. After you press the button to confirm the selection, the Date/Time settings screen appears. 4. Press the left/right arrow buttons to select the Date/ Time to be adjusted: Time is displayed in YYYY. MM.DD HH:MM. 2.
5. Press the up/down arrow buttons to press the value for your selected block. After you finish your settings, press the button to confirm. 6. Press the button and the following snapshot screen appears. Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, press the up/down arrow buttons to select , and press the button to enter the menu. 2.
MODE OVERVIEW Display Setting Press the Off. button to display the settings: Classic, Full, Off: Does not display any additional icons on screen Classic: Displays the camera parameters on screen x3.4 SD 1234 F 1/50 -0.3 EV 400 ISO Full: Camera parameters with Grid and Histogram SD x3.4 1234 F 1/50 -0.
LCD Screen Display Overview of the screen icons in photo shooting mode 3 2 1 4 2 Macro mode 5 3 Zoom display (By turning the Zoom Lever) 4 Memory card/Built-in memory SD 6 x3. 4 7 8 18 17 F 1/50 16 15 14 1 6 White balance (Adjustable in 1234 9 7 Color Effect (Adjustable in 00:56:00 10 8 Number of remaining shots -0.
19 20 21 SD x3.4 Self-timer Off 25 24 23 1234 22 00:56:00 F 1/50 19 AF mode 21 Self-timer -0.3 EV 400 ISO Self-timer 2 sec Self-timer 10 sec Self-timer Smile 22 HDR (Adjustable in Single-AF 23 Eye-Fi ON (with signal) Multi-AF 24 Expo metering Object Tracking 20 Flash mode Flash Auto Fill Flash Slow Sync. mode) AiAE Spot Center 25 Continuous Shot Single Continuous Shot Slow Sync.
Overview of the screen icons in movie mode 1 2 3 5 4 7 Color effect SD x3.4 15 6 8 Video quality 7 14 12 11 00:56:00 -0.
Overview of the screen icons in playback mode 1 2 1 3 DPOF file 2 File protection 1/45 SD 13 4 5 12 3 Memory space (indicating the current number of photos and total number of photos) 4 Memory card/Built-in memory 11 5 Battery status 10 x2 00 :00 201 6 6 Zoom magnification area 7 7 Image zoom ratios 8 8 Image zone 9 Shooting date 9 10 Eye-Fi ON (with signal) 11 Touch-up 12 HDR 13 Date folder 25
Using the Mode Dial This camera provides a convenient mode dial that allows you to manually switch among different modes with ease. The available modes are listed below: Mode Name 26 Icon Description Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures. Program AE Setting allows you to choose the EV value and the camera will select both the shutter speed and aperture automatically.
Auto Mode Program AE Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to adjust your photos and videos for the best possible results. When (Program AE) mode is selected, you can adjust the EV value and ISO value. 1. Turn the mode dial to configure settings. and press the button to Follow these steps: 1. Use the power switch to turn the camera on. 2. Switch the mode dial to auto mode ( ). 3.
Manual Mode Shutter priority When (Shutter priority) is selected, you can adjust the shutter speed , the EV value and ISO value. The camera automatically sets the aperture value based on the shutter speed value to get the most appropriate exposure value. 1. Turn the mode dial to configure settings. and press the When selecting manual ( ) mode, you can set the aperture / shutter speed manually and ISO value. 1. Turn the mode dial to configure settings. and press the button to button to 2.
Face Beautifier In beautifier mode, the camera is set to automatically adjust camera exposure for realistic portrayal of skin tones. Beautifier mode has 3 effects: • Effect 1: Skin Soften 1. Turn the mode dial to select face beautifier mode ( ). • Effect 2: Skin Soften + Eye Brightening 2. Press the to select • Effect 3: Skin Soften + Eye Brightening + Eye Enlargement button and press the up/down buttons . 3.
Panorama Mode With panorama mode, you can take a series of pictures which will be stitched automatically into an ultra-wide panoramic picture by the camera. Follow the steps below: 1. Turn the mode dial to panorama mode ( ). 2. Press the arrow buttons to select a shooting direction. (The right direction is used as default if you do not make any choice) 2 seconds later, the camera is ready to take pictures. You can also press the button or half press the shutter button to be ready to take pictures. 3.
Scene Mode In the process of automatic panoramic shooting, "Improper alignment. Please try again." shown on the LCD means that the moving angle deviates from the green baseline during camera moving which leads to shooting failure, and you need to shoot again. In panorama mode, up to 4 photos can be captured when the image size is set at 2M. You can select an appropriate mode from the 22 scene modes according to the type of environment you are shooting.
Scene Auto Scene 32 Description Identifies the scene automatically; Person, Backlighting, Landscape, Macro, Night Scene, Night Scene Person, Auto. Sport For fast-moving subjects. Capture sharp, action shots with minimal blur. This mode is not recommended for shooting indoors. Beach For taking pictures in areas with strong sunlight. Sunset For sunsets. Capture subjects in strong sunlight. Fireworks For fireworks at night. Suggest using tripod. Night Landscape For night scenes.
Scene Description Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background. Portrait Most suitable for capturing people with focus on their face. Fish Eye For interesting fish eye effect. Party Suitable for taking indoor party pictures, even under the complicated lighting conditions. Indoor For indoor settings. Reduce blur and improve color accuracy. Leaf For plants. Capture brilliant shots of greenery and blossoms.
Auto Scene (ASCN) In “ASCN” scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. To use "ASCN": 1. Turn the mode dial to “SCN” and select “ASCN” mode. “ASCN” can intelligently detect the following scenes: Icon Mode Name Icon Mode Name Landscape Mode Night Landscape Mode Portrait Mode Macro Mode Night Portrait Auto Mode Backlit Portrait 2. Hold the camera steadily and aim at the subject.
Mode Name Description Landscape Mode For landscapes, will automatically adjust the exposure and reproduce vivid green and blue colors. Portrait Mode Most suitable for capturing people with focus on their faces. Night Portrait When you take portraits at night, or in low light conditions, will automatically adjust the exposure for people and night scenes.
Custom Settings The user can store the frequently used shooting modes and parameters and switch to this mode for quick adjustment. Follow the steps below: 1. Select any mode to be stored. 2. Set your desired parameters in the current mode. 3. Press the button, press the up/down arrow buttons to select , and press the button to enter the menu. 4. Press the up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 5.
Landscape While operating in this mode, the camera will vivid reproduction of green and blue, adjust your landscapes photos for the best possible results. Follow these steps: 1. Use the power switch to turn the camera on. 2. Switch the mode dial to Landscape ( ). 3. Compose your picture in the LCD and press the shutter button halfway down to focus on the subject. SD 1234 00:56:00 4. The LCD will show a green focus frame when the subject is in focus. 5.
BASIC OPERATION Using the Zoom Function Your camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Toggle the zoom lever of the camera to zoom in or out of the subject while taking pictures. SD x3.4 Zoom indicator 1234 00:56:00 F 15 -0.3 EV 400 ISO When the optical zoom reaches the threshold as digital zoom, release and turn the zoom lever to T to switch between the optical zoom and digital zoom.
Focus Setting In different photo shooting modes, you can select different focus methods. 1. Press the up arrow button ( ) to display the settings screen. 2. Press the left/right arrow buttons to select the following 3 modes: Single-AF: The focus frame appears on the center of the LCD screen to focus on the subject. Multi-AF: The camera automatically focuses the subject in a wide area to find the focus point. Object Tracking: Smart tracking of the object in motion under the focusing shooting. 3.
Self-timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set for 2 seconds, 10 seconds or by smile detection. 1. Press the down arrow button ( self-timer menu. • Self-timer 10 sec A single picture is shot 10 seconds after the Shutter Button is pressed. • Self-timer Smile Press the shutter button and a picture will be taken immediately after a smile is detected. ) to enter the 3. Press the the menu. 2.
Flash Mode The flash provides supplemental light for the scene. The flash is usually used when shooting against the light to highlight the object; it is also suitable for metering and shooting in darker scenes to improve the exposure. 1. Pop up the flash manually as shown below. 2. Press the right arrow button ( settings menu. • Flash Auto Camera flash goes off automatically based on existing light conditions.
White Balance Setting The white balance setting allows you to adjust the color temperature for different lighting sources to ensure the most accurate color reproduction. • AWB • Daylight Follow the steps below to set white balance of the camera: • Cloudy • Fluorescent • Fluorescent CWF • Incandescent • Manual WB (Fully press the shutter button to detect the white balance value) • Color Temp.
Continuous Shot Follow the steps below to configure the continuous shot settings: 1. Press the menu. button to enter the continuous shot • 3 Shots • Time-Lapse Take pictures based on the preset interval (30sec/1min/5min/10min). 3. Press the the menu. button to confirm the settings and exit 4. Press the shutter button to start continuous shooting. The flash is disabled in continuous shot mode in order to achieve quick succession of shots. 2.
EV Setting The EV function menu of the camera includes functions, such as EV adjustment, ISO, shutter, aperture, etc. Using the appropriate function settings can improve your pictures. To select the best setting for optimum photos, follow these steps: 1. Press the Exposure Compensation Set up to adjust the picture brightness. In the case of a very high contrast between the photographed object and the background, the brightness of the picture can be appropriately adjusted.
ISO Shutter Adjustment The ISO function allows you to set the sensitivity of the camera's light sensor based on the brightness of the scene. To improve the camera's sensor performance in darker environments, a higher ISO value is required. A lower ISO value is needed when shooting in brighter conditions. For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed so as to obtain a most suitable exposure value.
Using Quick Recording Aperture Adjustment You can adjust the aperture size value. Selecting a large aperture opening will emphasize the point of focus and show a blurry background and foreground. A small aperture opening will keep both the background and main object in clear focus. (Adjustable in mode) F3.7 46 1/50 -1.0 EV 100 ISO In shooting mode, press the recording short cut button to begin recording video.
i Button Function Menu Mode: • Black and White The image color setting allows you to select different effects. • Vignetting • Salon • Dreamy 1. Press the menu. button to select the image color setting 2. Press the left/right arrow buttons to select the image color setting options.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Use the left/right arrow buttons navigation buttons to scroll through the photos or video clips stored in the built-in memory or on the memory card. 3. To play a selected video clip, press the button to enter the movie playback mode. An operation guide appears on the screen when playing back a video.
Thumbnail View When in playback mode, rotate the zoom lever counter clockwise to the position to display thumbnail images of the photos and videos on the screen. W Zoom Out T Zoom In 3 Press the button to select date playback. ‘11-03-02 ‘11-04-01 ‘11-07-07 ‘12-01-21 4. Press the arrow buttons to select a picture or video clip to view and press the button to restore it to the original size. 1. Slide the zoom lever to switch between 3x3 and 4x4 thumbnails. 2.
Using Zoom Playback (for still pictures only) The zoom lever can also be used during playback. This allows you to magnify photos between x2 to x8. W Zoom Out T Zoom In 1. Press the left/right arrow buttons to select a picture to be zoomed in. 2. Rotate the zoom lever clockwise to ( in. ) to zoom 3. The magnification and range of the picture will be displayed at the bottom right corner of the screen. 50 4. Press the arrow buttons to navigate and select a part of the image to be zoomed in. 5.
Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press the button to enter playback screen. 2. Press the button to enter slide option. 3. Press the left/right arrow buttons to select slideshow playing or 「Cancel」 to return to the playback screen. 4. Press the button to confirm the setting.
Photos and Video Deletion In playback mode, press the down arrow button ( to select your photos and videos. ) To delete photos or videos: 1. Press the button to switch to playback mode. 2. Press the left/right arrow buttons to select the photos and videos to be deleted. 3. Press the down arrow button ( screen is displayed. 52 ) and the deletion 4. Press the up/down arrow buttons to select 「Delete One」or「Exit」and press the button to confirm. Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Expo Metering (Exposure Metering) Mode: 1. In photo shooting mode, press the the photo shooting nenu. button to enter Use this setting to select the "target" size of the camera's field of view to be metered. 2. Press the up/down arrow buttons to select the photo shooting menu to be set. 3. Press the left/right arrow buttons to select the photo shooting menu to be set and press the button to confirm.
Image Size OIS The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality. This mode can help reduce photo blur caused by unintentional hand shake, low light . The bigger the number of recorded pixels is, the better the image quality becomes. As the number of recorded pixels lessen, you will be able to record more images on a memory card.
Cont. AF HDR Enable the continuous AF to be able to continuously focus automatically when taking pictures. With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. There are 2 options: • Off • On There are 2 options: • Off • On Setting continuous AF to On will reduce battery life.
Beautifier Select Scene Set the effect of the beauty mode. Select the scene mode under the SCN mode.
• Options in the shooting mode (O: Available X: Not Available) Shooting Modes Options о о о о о о о о о о о о о о о о о о о х х о о о о о х х о о о о х х х х х х х о х х х х х х х о х 57
Photo Shooting Setting Menu Mode: Quality 1. Press the button in photo shooting mode and press the up/down buttons to select . The quality setting can be used to adjust the image compression ratio. 2. Press the There are three options for picture quality: button to enter the menu. 3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 4.
AF-Assist Beam Date Imprint In a darker environment, AF assist beam can be turned on for better focus. Include a Date/Time stamp on the photo image. Digital Zoom Turn on or off the digital zoom.
Quick Review Custom Settings This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD based on the selected time. Custom settings stores the current photo shooting mode and its parameters. The stored mode and parameters are directly invoked in custom settings mode. There are 4 options: There are 2 options: • Off • No • 1 sec • Yes • 2 sec • 3 sec A shorter quick review time will improve battery life.
Movie Menu Mode: 1. Turn the mode dial, select the mode and press the button to enter the movie menu. Expo Metering (Exposure Metering) Use this setting to select the "target" size of the camera's field of view to be metered. There are 3 options: 2. Press the up/down arrow buttons to select the movie menu to be set. 3. Press the left/right arrow buttons to select the movie menu to be set and press the button to confirm.
Video Quality OIS Set the image resolution used during video recording. This mode can help reduce photo blur caused by unintentional hand shake, or low light. The speed requirements for reading and writing high image pixel images to SD card are as follows: No.
Movie Setting Menu Mode: 1. Turn the mode dial and select recording screen. to enter the video 2. Press the button, press the up/down arrow buttons to select , and press the button to enter the menu. 4. Select the items to be set and press the button or the right arrow button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm. 3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu.
64 Digital Zoom Custom Settings Turn on or off the digital zoom. Custom settings stores the current movie shooting mode and its parameters. The stored mode and parameters are directly invoked in custom settings mode.
Playback Menu Mode: HDR 1. Press the button to display the playback screen and press the button to enter the menu. With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. 2. Press the up/down arrow buttons to select the playback to be set and press the button to enter. 3. Press the left/right arrow buttons to select an option and press the button to confirm. 1.
Touch-up Rotate 1. In playback mode, press the left/right arrow buttons to select the photos to be edited. You can use this setting to change the orientation of the picture. 2. Press the button, select the settings, and press the button to display the settings screen. 1. In playback mode, press the left/right arrow buttons to select the photos to be edited. 3. Press the left/right arrow buttons to select Touch-up or 「Cancel」 to return playback screen. 2.
Resize Color This setting allows you to resize a picture to a particular resolution and saves it as a new picture. This setting allows you to change the picture color effect. The file is saved as a new photo and stored in memory together with the original photo. 1. In playback mode, press the left/right arrow buttons to select the photos to be edited. 2. Press the button, select the settings and press the button to display the settings screen. 3.
Playback Setting Menu Mode: 1. Press the press the to select button to show the playback screen, button, and press the up/down buttons . Refer to the following pages for more details about each setting. 2. Press the button to enter the menu. Protect To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. 3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 4.
Delete 2. Press the up/down arrow buttons to select the submenu and press the button or right arrow button to show the settings screen. You can delete one or all photo/video files. There are 4 sub menus available: • One: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • Date Folder: Protect all photos in the date folder. • All: Lock all photos or videos. • Reset: Cancel all locked photos or videos. 3.
DPOF (Digital Print Order Format) 3. Press the up/down arrow buttons to select an option and press the button to confirm. The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the memory card to print without having to individually specify the photos you want to print.
Trim The trim setting allows you to crop photos and save them as new pictures. 1. Press the up/down arrow buttons to select「Trim」 and press the button or right arrow button to enter the menu. 2. Select「Yes」to confirm trim. Select a part to be trimmed using the zoom lever and arrow buttons to trim a photo. 3. Press the button and the「Save change?」prompt appears. Select「 」to change and save the picture. Select「 」to cancel changes and return to the trim prompt screen.
Setup Menu 1. Press the button in any mode and press the up/ down buttons to select . 2. Press the button to enter the menu. 3. Press up/down arrow buttons to select , and press the button or right arrow button to enter the menu. 72 4. Press the up/down arrow buttons to select the item to be set and press the button or right arrow button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm.
Sound Settings Power Saver With this setting you may adjust the sound volume. This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD and camera off automatically after a consecutive period of inactivity. 1. Select「Sound Settings」in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the left/right arrow buttons to select an option. 1.
File / Software World Time Format The zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files. To use this setting: 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2.
5. If you select「Yes」the camera formats its memory. If there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, it will be formatted only. Copy to Card Use this setting to copy the files stored in the built-in memory to a memory card. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu. 3.
Reset FW Version Use this setting to restore the camera to its original factory default settings. Use this setting to view the current camera firmware version. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu. 2.
CONNECTIONS Connecting to a Computer You can use a USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2.
Video System 3. Connect the other end of the cable to an available USB port on your computer. Use this feature to switch the video system from either NTSC or PAL. 4. After the transmission is complete, disconnect the USB cable according to the instructions specifying how to safely remove USB devices. 1. Press the button, press the up/down arrow buttons to select and press the button to enter the menu. 2. Press up/down arrow buttons to select and press the button or right arrow button to enter the menu.
Set Eye-Fi SD Card Connection Mode NTSC: English, Chinese (Traditional), Japanese, French, Korean, Russian, Vietnamese, Greek, Hungarian, Slovakian PAL: German, Spanish, Italian, Chinese (Simplified), Portuguese, Swedish, Danish, Finnish, Indonesia, Norwegian, Dutch, Turkish, Polish, Thai, Croatian, Czech, Arabic, Hindi The video output system would change accordingly based upon the changes of the selected language. This camera supports wireless connection for Eye-Fi memory cards.
Supported HDMI Connections HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted. Direct transmission of digital video signals to your TV reduces conversion loss and improves image quality. Connecting HDMI-Ready TV 1. Use a High-Definition output terminal cable (not included) to connect your camera to a HDMI compliant TV. 2. The camera will be automatically detected by the TV. 3.
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner's manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied USB cable, without the need for a PC. 3.
Connecting to your Printer 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to printer, the PictBridge menu will appear. Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」 and the screen as shown below appears. Press the up/down arrow buttons to select a menu item and press the button or right arrow button to enter the item.
Print (without Date) 3. Press the up/down arrow buttons to select the number of copies for the currently displayed photo. 4. Press the appear. button and the following screen will 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. Use this setting to print the photos without dates on them. 1. In the PictBridge menu, select「Print (without Date)」 and the screen as shown below appears. 2. Press the left/right arrow buttons to select a photo to be printed. 3.
Print Index You can print all photos in the camera via this function. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 70. Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen. 1. In the PictBridge menu, select「Print DPOF Images」 and the screen as shown below appears. Disconnect the USB cable from the camera and printer. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
APPENDICES Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3"CCD Effective Pixels 16.15 Megapixels Total Pixels 16.44 Megapixels Focal Length 4.3mm (Wide) — 107.5mm (Tele) 35mm film equivalent 24mm (Wide) — 600mm (Tele) F number F3.7 (Wide) — F6.
Number of Recording Pixels Movie 1280×720(30/15fps), 640×480(30fps), 320×240(30fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 88 Still Image (4:3) 16MP: 4608×3456 10MP: 3648×2736 5MP: 2592×1944 3MP: 2048×1536 0.3MP: 640×480 (3:2) 14MP: 4608×3072 (16:9) 12MP: 4608×2592 2MP: 1920×1080 Still Image Exif 2.3 (JPEG) Movie Movie Format: MOV (H.264), Audio: G.
LCD Display 3.
Flash Flash Method Pop-up(Manual) Flash Modes Flash Auto, Fill Flash, Slow Sync., Slow Sync. + Red-Eye, Red-Eye Reduction Recording Media 90 Internal Memory: Approx. 8MB SD/SDHC Card (Up to 32GB [MMC Card Not Supported] PictBridge, ExifPrint Support Yes Multi-Language Support 28 Languages Jacks AV-OUT/USB 2.
Prompts and Warning Messages Message Description Solution Warning! Battery exhausted. The camera battery is used up. It is a warning indicating that the camera is going to shut down. Replace with new batteries. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn off the camera and restart it to reset the lens. Suggest using tripod.
Message 92 Description Solution Remove USB Cable! Indicates that you can disconnect the USB cable. The message disappears after you disconnect the USB cable. Connection Failed! Failure to connect to your PC, printer, TV (with HDMI). Remove USB cable and retry connection. Write Protect ! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. The message will disappear after 2 seconds. Card Full ! Indicates that the SD card is full.
Message Description Solution Card is not formatted. When an error occurs in the memory card, the message "Not Formatted" appears. Format the memory card. WARNING: Formatting the SD card will erase all data on the card. Copy the data from the memory card to another storage, such as a computer. Otherwise, all data will be erased after the format. The message will disappear after 2 seconds.
Message 94 Description Solution Exceeded maximum folder number. This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. Too many pictures for fast processing. During the playback by date, the images The message disappears after 2 seconds exceed specifications so that it is not and the camera returns to the normal possible to play by date. playback mode. Unable to recognize files.
Troubleshooting Problem Possible causes Solution Camera does not turn on The battery is not inserted correctly. Correctly reinstall the battery. Camera turns off suddenly during operation The batteries have been depleted. Replace the battery. The picture is blurred Camera shakes while taking a picture. Images and video files cannot be saved Images will not print from the connected printer The memory card is full. The memory card is locked. Turn on OIS feature.
Problem Saving data to memory card is slow Cannot write to the memory card 96 Possible Causes Solution Using a memory card below Class 4 may result in slower recording times. Use a memory card with write Class higher than 4 to improve performance. The memory card has been locked. Release the write lock of the memory card or replace with another card. The camera may experience trouble recording HD movies to SD cards with a rating lower than Class 4.
Licensed Product The Kodak trademark and trade dress are used under license from Kodak. © 2015 by JK Imaging Ltd. All Rights Reserved. JK Imaging Ltd., 17239 South Main Street, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, Watford, WD17 1DS, UK www.kodakpixpro.com Ver.
