Operating Instructions

4 Unroll about a foot of film and fit the square hole
in the spool of film over the square base on the supply
spindle.
(If the film chamber is off the mechanism
part, unroll about two and one-half feet of film.)
5
Refer to the illustration. The white line represents
the path the film must follow.
6
Thread the film between the SPROCKET and the upper
sprocket clamp. Engage the film perforations with
the sprocket teeth; then close the clamp.
7 Follow
the threading guide line between the upper
guide and PRESSURE PLATE, so that the proper film
loop is formed.