Operating Instructions

-- --- - -- - ----_._- - -
12 Attach th e end of the film in the slot in an empty
TAKE - UP SPOOL; th en wind th e film a few turns around
the core, in the dire c tion of the arrow, to take up th e
slack
and to mak e certain that it is attached securely.
The film mus t be attached so that the square hole in
the spool will fit over th e square base on the spindle.
v V double check these points
Press th e ex posure release for a moment and observe
th e following conditions (if the film chamber is not
attached to the camera mechanism, turn the sprocket
counterclockwise a few
turn s) :
1. Th e spools mnst be seated all the way down on the
spindles.
2.
Th e sprocket clamps must be closed.
3.
Th e film must move evenly along th e path designated
by
tlJ,e th reading guide line.
4. The film loops
must be maintained.
caution: It is possible to run film through the ca mera wit hout
takin g satisfactory pictures, when the pulldo wn does not e n-
gage the film perforations. This is because th e main driving
force
co mes from the sprocket. Always mak e ce rtain that the
pulldown claw engages
the film per/orations.
Replace the film chamber door; turn the handle
clockwise to lock it.
11