Operating Instructions

j
For normal screen action in silent pictures, set the
index mark opposite 16.
Sound pictures are projected at 24 frames per sec·
ond. If sound is to be added to the film, set the index
mark opposite 24 for normal screen action.
Any camera speed faster than projection speed will
produce slower-than-normal action in the projected
picture. Conversely, any speed slower than projec-
tion speed will produce faster-than-normal action
in the projected picture.
Do not operate the camera without film at speeds
exceeding 32.
focusing the lens
Turn the FOCUSING RING on the lens until the figure
representing the camera-to-subject distance is oppo-
site the index mark.
You can use the reflex finder to determine focus, as
described in The Reflex Finder, page 17.
When you focus by actual measurement, always
measure from the subject to the film plane </> on the
forward edge of the film chamber.
setting the lens opening
Turn the LENS OPENING RING until the selected lens
opening is opposite the index mark.
The lens opening can be determined from several
sources.
The latest exposure data will be found on the
instruction sheet packed with every roll of Cine-Kodak
15