Operating Instructions
I
r
I
f
I
PI
CTU
RE
CON
TROLS
K
od
ak cine lenses
A wide variety of lenses
are
available for use with
the
Cine-Kodak Special
II
Camera. See page 40.
No
adapter
is necessary
for
attaching
lenses to the
camera. You will find two slots
on
the lens
mount
in
-
side the
KNURLED
COLLAR.
Match
the
locating
pin
on
the lens to the slot which
brings
the
index marks for
focusing
and
lens openi
ng
to a convenient
reading
position.
If
the
lens is not
in
the
taking
position, the
index
marks
will be
on
the bottom of the lens. Make
sure
th
e lens is properly seated; then tighten the
knurled collar.
Except for the
front
finder supplied with the cam-
era, a clip-on
front
finder must be purchased for
every new lens.
Each
finder is engraved with the focal
length of the lens with which
it
is to be used. Direc-
tions
for
attaching the finder
are
on page 16.
the
turret
The
lens
turret
on
the Cine-Kodak Special
II
Camera
is
made
to
accommodate
any
two
Kodak
cine lenses,
either one of which
can
be
in
the
taking
position
without optical interference
from
the other lens. To
change the lens position,
rotate
the
turret
in
the di-
rection indicated by the
arrow
on
the
turret. A lens
is
in
taking
position when
it
is
on
the chamber side of
the
camera
directly below the reflex finder.
,
19
--------------
--------