Operation Manual

Kodak EasyShare Software for Mac OS X
Sync and Transfer Manager
After you add your camera to EasyShare software through the Sync and Transfer Assistant,
you can go back and make changes through the Sync and Transfer Manager.
The Sync and Transfer Manager lets you configure and manage one or more devices so they
work with EasyShare software. You can make these changes anytime.
You can change most settings in the Sync and Transfer Manager either with or without the
device connected. Some settings require you to connect the device with a USB cable,
including wireless devices.
If the device is connected, the changed settings are saved and immediately synchronized
with the device.
If the device is not connected, the changed settings are saved and synchronized with the
device the next time it is connected.
NOTE: Some devices may not support all Sync and Transfer Manager features.
Choose Tools → Sync and Transfer Manager.
General tab
1. Select a device from the list in the left column and then click the General tab (if it is not
selected).
2. Do the any of the following as appropriate.
Change synchronization behavior. To change the synchronization behavior of
this device with the EasyShare collection on your computer, connect the device
using a USB cable and then select either of the following.
•
– Yes, synchronize with my software
– No, only transfer my pictures
100 December 2005