Digital Science Zoom Camera User Guide DC210+

Taking Pictures 3-3

To delete the picture that was just taken without leaving Capture mode, perform the fol-

lowing steps:

1. Set the mode dial to Capture.

2. Turn on the camera.

3. Take a picture.

The picture is displayed on the LCD.

4. Press the button.

The delete screen appears in the LCD.

NOTE: The picture must be showing on the LCD screen to activate the delete screen.

5. Press the or button until the correct delete option is highlighted.

6. Press the Do-It button.

The picture is deleted from the memory card.

To exit, press the or

button until NO is highlighted, and then press the Do-It button.

$ GMXVWLQJWKH([SRVXUH9DOXH

The camera’s exposure value (EV) can be adjusted from –2.0 to +2.0 EV in 0.5 increments

while in Capture mode. A +1.0 adjustment in EV doubles the amount of light allowed to

reach the charge coupled device (CCD) in your camera. A –1.0 adjustment in EV halves the

amount of light allowed to reach the CCD in your camera.

If your pictures are too dark, increase (+) the exposure compensation setting. If they are

too light, decrease (–) the exposure compensation setting.

&KDQJLQJ([SRVXUH&RPSHQVDWLRQ

To change exposure compensation, perform the following steps:

1. Set the mode dial to Capture.

2. Turn the camera on.

button

Do-It button

button