Digital Science Zoom Camera User Guide DC210+

3-6 KODAK DIGITAL SCIENCE DC210 Plus Zoom Camera User’s Guide
5. Press the shutter button.
The red self-timer light, located on the front of the camera, turns on and stays lit for
8 seconds. The self-timer light flashes for 2 additional seconds just before the picture
is taken. Self-Timer returns to the off setting once the picture is taken.
To stop this function, press the self-timer button again before the picture is taken.
0HPRU\&DUG6WDWXV
The Card Status icon changes automatically to indicate if there is a memory card inserted
in the camera. You may not select or change this icon.
&ORVH8S
The camera includes a close-up button that allows you to set the camera’s focus distance
at 8 inches (20 centimeters [cm]).
The red-eye reduction option for the flash setting is not available when Close Up is on.
NOTE: To accurately capture the picture in Close Up, the Preview option automatically
starts when the close-up button is pressed. Refer to “Previewing a Picture” found earlier in
this chapter for detailed information. To deactivate the Preview option, press the Do-It
button.
To turn on the Close Up setting, perform the following steps:
1. Set the mode dial to Capture.
2. Turn on the camera.
3. Press the close-up button.
The Close Up icon appears on the status display.
4. View the subject on the LCD display to accurately capture the picture.
To cancel Close Up, press the close-up button again. The Close Up icon disappears from
the status display. The Close Up setting is automatically turned off when the camera is
turned off.
No card inserted — Pictures cannot be taken.
Card inserted — Pictures are saved to the card’s memory.