Digital Science Zoom Camera User Guide DC210+

4-4 KODAK DIGITAL SCIENCE DC210 Plus Zoom Camera User’s Guide
To view pictures on a TV, perform the following steps:
1. Turn off your TV and the camera.
2. Insert the video output cable into the video-out connection on the side of your camera.
3. Connect the other end of the cable to the video-in connection on your TV.
4. Turn on the camera and TV.
5. Set the mode dial on the camera to Review.
6. Set the TV to the correct video setting.
The pictures that are stored on the memory card appear on the TV screen.
NOTE: You may need to adjust the Video Out preference on the camera. Refer to
“Video Out” in Chapter 5 for details.
7. Press a or button on the camera to scroll through the pictures on the TV.
To run a slide show, press the Do-It button. The slide show starts, and the pictures
change every five seconds for a period of five minutes. If you are using an AC adapter,
the slide show runs indefinitely.
To cancel the slide show, press the Do-It button. The slide show stops and the main
Review screen reappears.
video-out
connection