Digital Science Zoom Camera User Guide DC210+

Adjusting Camera Settings 5-7
To turn on Quickview, perform the following steps:
1. Set the mode dial to Preferences.
2. Turn on the camera.
The LCD displays the Preferences screen.
3. Press the
button until the Quickview icon (shown below) is highlighted on the sec-
ond Preferences screen.
4. Press the Do-It button.
The LCD displays the main Quickview screen. The current setting is checked ( ).
5. Press a or button until ON is highlighted.
6. Press the Do-It button.
The main Preferences screen reappears.
The next time you take a picture, it appears for a moment on the LCD screen.
To turn off Quickview, press a or
button until OFF is highlighted, and then press
the Do-It button. The Quickview setting is maintained until another setting is selected. This
setting does
not
change when the camera is turned off.
'DWHDQG7LPH
The Date and Time screen sets the camera’s date and time. To set the date and time, per-
form the following steps:
1. Set the mode dial to Preferences.
2. Turn on the camera.
The LCD displays the Preferences screen.