Digital Science Zoom Camera User Guide DC210+

Transferring Pictures From the Camera to the Computer 6-3
7. Turn on the camera.
When the camera is correctly connected to your computer, three squares rotate on
the status display:
8. Turn on your computer system.
9. Start the Picture Easy software by double-clicking the Picture Easy icon on your Win-
dows desktop.
You can also start the software by clicking the Start button, pointing to
Programs—> Kodak—> Picture Easy Software, and clicking Picture Easy.
For more information on this software, refer to the “Using the Picture Easy Software”
section of the online
KODAK DIGITAL SCIENCE DC210 Plus Zoom Camera User’s
Guide
. The guide can be accessed by clicking the Start button, pointing to
Programs—> Dell Documents, and clicking Kodak DC210+ Camera User’s Guide.
To cancel the connection, turn the mode dial to another setting or turn off the camera.
,QIUDUHG&RQQHFWLRQ
Your computer must be set up with an infrared connection before the camera’s infrared
transceiver can be used.
NOTE: If you are using the camera’s infrared transceiver to connect to the computer and
the camera automatically turns off because of inactivity, you need to press the camera’s
power button to turn the camera back on.