Kodak DirectView 3MP Color Display Model# DV3MC CAT 802 6635 Thank you for purchasing our Color LCD Monitor. ◆ Carefully read this User's Manual and use the product properly. Before using it, also read "Safety Precautions." ◆ Keep the User's Manual as close to you as possible and in safe custody. ◆ If you have lost the manual, contact your dealer. We will reissue a manual. Contents 1.Safety Precautions .................................3 2.Auxiliaries ...............................................7 3.
Safety Precautions Attention, Consult accompanying documents Dangerous Voltage, Risk of electric shock To reduce the risk of electric shock, Do not remove the back cover. No-user serviceable parts inside, Refer to qualified service Personnel. FCC Information FCC (U.S.Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Follow the instructions below for safety use of the color LCD monitor. -Read this user’s manual and properly use the unit. -You must agree that Kodak is not liable for any damage caused by any third party’s or your negligence of following the instructions of this user’s manual and misuse except those specified responsibilities for compensation accepted by law. ●Symbols -This user’s manual contains various symbols to guide users to properly use the product.
Caution ●Do not put the unit in such place where it is subject to direct sunlight or near any heating device. The cabinet and/or components may be damaged, which may cause generation of fever and ignition. ●Do not use the attached AC adapter to other devices (models with attached AC adapter). It may lead to generation of fever and/or fire. Also, do not use any other AC adapter to this unit. ●During a long-hour use, take a break 10 to 15 minutes every one hour for your eyes.
Notes ●Even if the unit is properly used, it may have an effect on radio and/or TV reception upon the condition of electric wave. If it is the case, give caution to the followings. 1) Ensure enough space between the unit and radio and/or TV. 2) Connect the unit and radio and/or TV to separate outlets. ●Color LCD monitor may have tiny spots and unevenness according to the displaying conditions, but they are not any sign of failure.
Auxiliaries Confirm the auxiliaries listed below are included. □ AC adapter □ Power supply cord (3P wall type) □ DVI-DVI cable □ Communication cable 1 1 1 1 □ USB cable □ User’s Manual (this manual) NOTES * We recommend you to keep the packing box for transportation and the like. * In case of transporting and packing the unit in the packing box, carefully place it, keeping its panel from touching any objects.
Features ●Use of a 20.8-inch (53cm) QXGA ultra-high-definition color LCD panel A large screen size and clear image is obtained by using a 20.8-inch (diagonal 53cm) QXGA (2048 x 1536 ) ultra-high-definition color LCD panel. Note To display the maximum resolution on DV3MC, a graphics card that can display 2048 x 1536 or 1536 x 2048 is necessary.
How to Operate 1. Names and Functions of Each Part Operating Section � � ① Power switch This turns the power of the color LCD monitor ON and OFF. ② Power indicator No.
Connection Section Portrait (shorter side at the top) � � � � � � � Left side view ③ USB upstream port Connect this port to the upstream connector from the computer. For the connection, use a USB cable 2 meters or shorter in length. ④ USB downstream port x 2 Connect the ports to USB devices (a MOUSE, etc.) with a maximum current consumption of no greater than 100mA per port. Connect the color sensor when you operate color calibration.
2. Adjusting the Display Angle The screen angle can be arranged by up to 70 degrees either to the right or left, bent down by up to 3 degrees and bent up by up to 17 degrees. As indicated in the drawing below, the adjustment is conducted by holding the color LCD display in both hands and slowly moving it. 17 degrees 70 degrees 70 degrees 3 degrees Caution Be careful not to catch your fingers when adjusting the angle holding the bottom of the LCD panel and turning the panel.
3. Rotating the LCD Panel When setting the color LCD monitor to horizontal display (landscape orientation), lift the LCD panel to the top of the tilt stand as shown in the figure below and rotate it by 90 degrees. Procedure ① Tilt the LCD panel upward. (Perform this procedure before sliding the panel upward.) ② Lift the LCD panel to the top (The tilt stand will slide about 60mm.). ③ Rotate the LCD panel by 90 degrees.
Connection Method 1. Confirm that the computer is turned off. 2. Connect the computer’s DVI digital video output connector and the LCD monitor's "SIGNAL" with the provided cable. When connecting the cable, do not forget to tighten the screw of the cable. 3. Connect the DC output connector of the attached AC adapter to the LCD monitor's "DC IN 12V" and the power plug to an inlet. 4. Turn on the LCD monitor and computer. Confirm that the monitor displays images.
Handling the cable cover 1. Removing the cable cover Lifting the hook at the top of the cover, slowly remove the cable cover and expose the cable holders. Hook Cable cover ������ ������ �� ��� ������ 2. Installing the cable cover Secure cables to the cable holders on the back of the stand. (Refer to the figure on the right) Install the cable cover. ��������� ������ It is free to arrange cable settings according to environment. Caution ●Do not give signal cables or the power cord a strong pull.
Antitheft security device slot This product has loaded an antitheft security device slot compliant with MicroSaver Security System of Kensington on the back of the color LCD monitor. MicroSaver security System can be purchased at PC supply shops. Antitheft security device slot * Kensington is a registered brand of Kensington.
Reference DDC*1 This unit has loaded a function compliant with DDC-2B, a VESA standard. This function reads into the set data written in the color LCD monitor internal device in advance on startup of Windows 95/98/Me/2000 or Windows XP and sets the detailed information of the color LCD monitor in the system file in order to achieve Plug&Play. Data reading from the color LCD monitor is done through a video signal cable, which needs to be connected when Windows 95/98/Me/2000 or Windows XP is on.
Assignment of Connector Pins Pin # 24-pin DVI-D Connector (female) DIGITAL Signal Connector - 17 - Signal 1 T.M.D.S. Data2- 2 T.M.D.S. Data2+ 3 T.M.D.S. Data2/4 Shield 4 T.M.D.S. Data4- 5 T.M.D.S. Data4+ 6 DDC Clock 7 DDC Data 8 NC 9 T.M.D.S. Data1- 10 T.M.D.S. Data1+ 11 T.M.D.S. Data1/3 Shield 12 T.M.D.S. Data3- 13 T.M.D.S. Data3+ 14 +5V Power 15 Ground 16 Hot Plug Detect 17 T.M.D.S. Data0- 18 T.M.D.S. Data0+ 19 T.M.D.S. Data0/5 Shield 20 T.M.D.S. Data5- 21 T.
Failure Diagnosis Check the followings before requesting repair. Symptom Verification Countermeasure Power doesn't turn on! (POWER indicator doesn't light!). a: Is the power cord connected? b: Is the power switch ON? a: Connect the power cord (see Pg.12). b: Turn the power switch on. The screen is not displayed! a: Is the signal cable properly connected? b: Is the POWER indicator orange? c: Is the computer on? a: Properly connect the appropriate signal cable (see Pg. 12).
Cleaning Cleaning the Cabinet and the Color LCD Monitor ●When cleaning, remove the AC adapter from the color LCD monitor and outlet for safety. ●Lightly wipe off dirt on the cabinet and LCD panel surface with a hard-wrung soft cloth soaked in a neutral cleaning solution. Follow its instruction when using a disposable cloth. ●Do not use thinner, benzine, alcohol or such on the cabinet that is made of plastic. These can damage the cabinet, alter its quality and cause the paint to peel off.
Specifications Product name : Color LCD Monitor Model : DV3MC Items Specifications LCD display device 53 cm (20.8-inch) Color TFT Normally Black Pixel pitch Horizontal 0.207 mm × Vertical 0.207 mm Display area Horizontal 318.0 mm × Vertical 423.9 mm Pixel 1536 × 2048 pixels Display gradation 16.77million (8 bit each) Backlight 12 cold cathode fluorescent lamps (CCFL) Optical characteristics of the LCD Horizontal ......... ± 85 deg (contrast ratio 10:1) Vertical .............
External Dimensions Portrait (shorter side at the top) ��� ��� 【Left side view】 【Front】 Landscape (longer side at the top) ��� ��� ��� ��� ��� 【Left side view】 【Front】 - 21 -
Technical Support Requesting Repair ① Read "Failure Diagnosis (Pg. 18)" carefully and check them yourself. ② In case of having abnormalities on your driver, stop operating, unplug the AC cable from the outlet, and consult dealer.Do not repair by yourself. It is very dangerous. ③ Consult your dealer for repair. ④ Use the product's packing and packing materials to send the product. Carefully place the unit in the packing, and keep the face from touching any packing materials.
EASTMAN KODAK COMPANY Rochester, NY 14650, U.S.A. www.kodak.