214 (ELEK). KODAK ENG 05-05-98 11:41 Side 1 CONTENTS 1 1. Before you start.........................................................................................2 2. Important information ...............................................................................5 3. Connecting a computer to the KODAK DP850 ULTRA ..........................6 4. Connecting a video source to the KODAK DP850 ULTRA ..................10 5. Connecting a TV-source to the KODAK DP850 ULTRA ......................
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 2 1 Before you start Thank you for choosing the KODAK DP850 ULTRA projector The KODAK DP850 ULTRA will display high brightness images with vivid colors, even under normal light conditions. Thanks to the unique KODAK Graphical User Interface, the KODAK DP850 ULTRA offers true plug and play operation from remote control, which by the way also can control your computer. 1.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 3 1.2 Accessories 1.2.2 Video accessories ◆ Super-video cable Please take a few minutes to make sure that your KODAK DP850 ULTRA contains all the necessary parts: ◆ Composite video cable 1.2.1 Computer accessories for external PC/MAC 1.2.3 Other cables/accessories ◆ Computer cable Enhanced Video Connector (EVC), ◆ Dual soft bag male at both ends, 3 m/9.8 ft. ◆ Cable for PC / MAC audio (Stereo jack, 0.3m/1 ft.) ◆ Power cable, 4m/12 ft.
1214 (ELEK).
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 5 1.3 Insert batteries in the remote control Figure 2 shows the remote control with the battery lid removed. Slide off the battery lid and insert the batteries with the + and - poles correct. Slide the battery lid back on again. 2. Important information The warranty card or copy of invoice is your proof of purchase. Please make sure that the warranty card is returned in order to get the warranty service you are entitled to.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 6 3. Connecting a computer to the KODAK DP850 ULTRA The procedure for connecting a computer to the KODAK DP850 ULTRA is the same for all types of computers. 1. Make sure the computer, monitor and KODAK DP850 ULTRA are switched off. 5. If you want to use the remote control to control your computer, connect the correct mouse cable from the computer to the adapter box. See figures 7 and 8.
1214 (ELEK).
1214 (ELEK).
1214 (ELEK).
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 10 4. Connecting a video source to the KODAK DP850 ULTRA The procedure for connecting a video source to the KODAK DP850 ULTRA is the same for S-video and Composite video SECAM, PAL N and PAL M modes are manually selected by pressing the “Green Button“. If the right format is not found the first time, press again. The video format is stored separately for each connector. 4.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 11 4.1 Using external speakers In order to use external speakers with the KODAK DP850 ULTRA you need an amplifier. Connect the amplifier to the audio out on the KODAK DP850 ULTRA. When external speakers are connected, these can be turned on or off from the KODAK DP850 ULTRA. To control the internal speakers, see section on Adjust audio settings, section 7.3.3.
14 (ELEK). KODAK ENG 05-05-98 11:41 Side 12 5. Connecting a TV- source to the KODAK DP850 ULTRA A TV-tuner is optional for the KODAK DP850 ULTRA The KODAK DP850 ULTRA behaves just like a normal TV. See the menus section 7.2.6 on how to adjust the TV settings.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 13 Cable When you are connected to a cable system you have two options. If you have a cable decoder you set your TV to the channel for the cable, and then you use the remote control for the decoder to switch between channels. If you do not have a decoder you simply set your TV up just like you would with an antenna. This is also the same with the KODAK DP850 ULTRA.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 14 6. Using the KODAK DP850 ULTRA 6.1 Different program modes for the KODAK DP850 ULTRA KODAK DP850 ULTRA has different modes of operation: ◆ Stand-by mode ◆ Normal mode ◆ Quick mode ◆ Menu mode ◆ Pointer mode ◆ Blank mode Stand-by mode In stand-by mode the projector is turned off and can be turned on by using defined keys, see section 6.3 Normal mode In normal mode a picture will be shown on the screen. The mouse will function as a normal PC/MAC mouse.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 15 6.2 KODAK Remote control The KODAK Remote control has two purposes: 1. To access the Main Menu and control the various image adjustments and utility functions of the KODAK DP850 ULTRA 2. To allow remote control of your computer Pointing it towards the projection screen operates the remote control. An infra red beam bounces from the screen to an infrared receiver on the KODAK DP850 ULTRA.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 16 The Remote control is very easy to operate. It has only six keys in addition to the pressure sensing mouse pad. The six keys are: Quick When pressing the Quick key you can switch between all selected functions for the Quick key. See section 7.2.4 for how to select functions for the Quick key. Key underneath the control Left mouse key Small gray key Interrupt/break an action (right mouse key) Menu The menu key gives access to the KODAK menu control functions.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 17 6.3 Using the touch panel on the KODAK DP850 ULTRA Source The KODAK DP850 ULTRA has direct keys for four sources: PC Figure 14: 17 The touch panel gives you direct access to the most important functions of the KODAK DP850 ULTRA. It is very handy to use when the remote control has low batteries, or you simply have forgotten to bring it with you.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 18 Volume (+/-) The Volume key is used to control the sound level when the KODAK DP850 ULTRA is connected to an audio source. Channel Click on the arrows left/right to switch between pre-programmed TV channels when TV is selected as source. Automatic set-up The automatic set-up key will set up the projector with optimal settings for the connected source. If you want to do manual adjustments you can do this by using the menus (see section 7).
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 19 6.4 Adjusting the height and angle of the KODAK DP850 ULTRA You can adjust the height and angle of the KODAK DP850 ULTRA by adjusting the four small feet underneath the product. NOTE! The KODAK DP850 ULTRA should never be left with an angle of more than 15 degrees over a longer period of time. This will shorten the lifetime of the lamp. 7. Using the menus 7.1 The menu system Main menu. Menu with video and TV tuner option installed.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 20 7.1.1 Main menu Stand by The main menu is divided into two parts: ◆ Icons ◆ Help text Icons The icons illustrate a function and are grouped into groups with similar functionality. Clicking an icon activates it. Some icons have a direct function and some will activate a second level menu. Help text By moving the cursor over the icons the text area will give a short description of the icon.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 21 Source Control panel You can connect four different sources to the KODAK DP850 ULTRA; one computer source, two video sources and one TV tuner (optional). You select the source you want to use by clicking on the icon representing the source. Use the pressuresensing pad on the remote mouse to move the mouse pointer to an icon and click the button (left mouse) underneath the remote mouse. In this menu you can make adjustments for picture and sound.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 22 7.2 Set-up menu 7.2.1 Picture orientation Set-up menu In the set-up menu the following sub-menus are available: ◆ Picture orientation ◆ Language Picture orientation ◆ Mouse system ◆ Quick key assignment The picture orientation menu is used for rotating and mirroring the picture. ◆ ZAP keys assignment Normal Normal is used when the projector is standing on a table projecting a picture on a screen.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 23 Rotate Rotate is used when the projector is ceiling mounted and projecting image from the front. 7.2.2 Mouse system Rotate and mirror Rotate and mirror is used when the projector is ceiling mounted and projects the picture from the back of the screen. Mouse system selection USB and mouse for MAC will be selected automatically when the mouse cable is connected. If your PC uses RS232 mouse, you must choose MS Serial Mouse in this menu.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 24 7.2.3 Language This menu allows you to choose between six different menu languages: English, French, German, Italian, Spanish and Norwegian. Click in the box next to the language you want to use. Click on the OK button. The window will disappear, and the selected language will be used in the main menu and in all other menus.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 25 7.2.4 Quick menu Quick menu settings In the quick menu you can assign functionality for the quick key on the remote control. When clicking on the quick key you will be able to switch between all the functions you have selected in this menu. In this example, the first time you click on the quick key you will activate the volume function. A volume bar will be displayed at the bottom of the projected image where you can adjust the volume up and down.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 26 7.2.5 Zap menu Volume (+/-) Controls the sound of active source. TV channel Controls the pre programmed TV channel assignments. If a TV tuner is installed and selected as source you can select TV channel by using the zap keys. Pointer You can activate the pointer function in the projector. One click activates the pointer and the next click deactivates it. Blank Activates blank mode by pressing the Zap key.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 27 7.2.6 Television programs Programming new channels This menu is only displayed if the TV tuner is installed and TV tuner is selected as source. The television program menu is then activated by pressing the ”television program” icon The TV setup menu is divided in two parts: ◆ Automatic TV station ◆ Program Automatic TV station search This function selects all TV stations with a signal (maximum 60 stations). These will be symbolized with a TV icon.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 28 7.2.7 Product information 7.3 Control panel menu Product information Click on the product information icon in order to get information about the product and company. Control panel menu In the control panel you have access to menus for adjusting picture and audio settings. The icons ”Picture positioning” and ”Synchronization Adjustments” are only visible if PC source is active.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 29 7.3.1 Picture control Select the picture control menu for adjusting brightness, saturation and tint. When PC is selected as source, only brightness will be available. When PAL/SECAM video is selected brightness, contrast and saturation will be available. All options will be available for NTSC video. Select OK to save your changes and exit, or select Cancel to exit without saving your changes. Selecting Default restores factory settings.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 30 7.3.2 Picture positioning 7.3.3 Audio control Audio control Picture positioning Adjust vertical and horizontal position of the picture on the screen with the two sliders. Select OK to save your changes and exit, or select Cancel to exit without saving your changes. Select this function when you have connected an audio signal to the ‘Audio in’ on the KODAK DP850 ULTRA connectors (or through the EVC cable).
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 31 7.3.4 Synchronization Adjustments 7.3.5 Color manager Synchronization Adjustments It is possible to adjust the synchronization in Computer mode by adjusting the Phase and the Frequency. The synchronization will be set by the automatic set-up function. Manual sync adjustments should typically not be required.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 32 7.3.6 Zoom/Focus adjustments 8. Maintenance All maintenance should be done by KODAK authorized service personnel. Contact your KODAK dealer for maintenance. The KODAK DP850 ULTRA lamp is designed to give you 2000 hours performance. In the unlikely event that you should have to chenge the lamp, you will find complete instruction on how to replace the lamp included in the spare lamp kit.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 33 9. What do I do if (Trouble shooting) 7. The KODAK DP850 ULTRA is not connected to electricity. Check that the power cable is connected to the KODAK DP850 ULTRA and the wall outlet. No image appears on the screen Possible causes and remedies: 1. The KODAK DP850 ULTRA is left in Standby mode. If the product is in standby mode, there will be a red light next to the stand-by button. Press the stand-by button or the Menu key on the remote cotrol. 2.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 34 The image is not good (noise) No Image Appears Possible causes and remedies: Possible causes and remedies: 1. The automatic image set-up is not activated. Run 1. The KODAK DP850 ULTRA has not been switched on. Check the ON/OFF switch at the back. auto set-up by pressing the green button on the touch panel or run auto set-up from the menu. 2. The synchronization on the PC is not set optimally. 2. There is no electricity in the power outlet in the wall.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 35 1. BEFORE YOU START ................................................................2 • 1.1 Color coding for ease of use .........................................2 • 1.2 Accessories.....................................................................3 • 1.2.1 Computer accessories for external PC/MAC .....3 • 1.2.2 Video accessories ................................................3 • 1.2.3 Other cables/accessories ....................................3 • 1.2.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 36 4. CONNECTING A VIDEO SOURCE TO THE KODAK DP850 ULTRA ...........................................................10 • 4.1 Using external speakers...............................................
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 37 6. USING THE KODAK DP850 ULTRA .......................................14 • 6.1 Different program modes for the KODAK DP850 ULTRA ..................................................14 • 6.2 KODAK Remote control................................................15 • 6.3 Using the touch panel on the KODAK DP850 ULTRA ................................................................17 • 6.4 Adjusting the height and angle of the KODAK DP850 ULTRA .......................
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 38 7. USING THE MENUS.................................................................19 • 7.1 The Menu System .........................................................19 • 7.1.1 Main menu...........................................................20 • 7.2 Set-up Menu ..................................................................22 • 7.2.1 Picture orientation .............................................22 • 7.2.2 Mouse system .................................