User’s Guide KODAK DP900 / DP1100 Digital Projectors PN 009-0405-00 3/99
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Terms: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking the Projector . . . . . . . . . . . . . . . . . . . . . . 3 Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front of Projector . . . . . . . .
KODAK DP900 / DP1100 Digital Projectors This guide contains the setup and operating procedures for your KODAK DP900 or DP1100 Digital Projector. For more information on how to connect, operate and maintain your projector, refer to your Reference Manual. Safety Instructions Please read and follow all safety instructions provided before using your new projector.
User’s Guide KODAK DP900 / DP1100 Safety Terms: • Warning: Don’t look directly into the lens when the projector is turned on. • Warning: Don’t block ventilation openings. •Warning: To replace the lamp, turn the power off and unplug the power cord. To avoid burns, wait 30 minutes before opening the lamp door. Follow all instructions provided in the Reference Manual. •Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal.
Unpacking the Projector The projector comes with the items shown here. If any items are missing, call your dealer immediately. 2 1 4 5 3 6 7 8 9 11 10 1. 2. 3. 4. 5. Digital projector and lens cap Soft carry case Remote control Power cord DP900 / DP1100 User’s Guide, Reference Manual, and Online User Guide CD 6. 7. 8. 9. 10. 11. RCA audio/video cable Cable hub connector Audio cable PS/2 mouse cable USB mouse cable MAC adapter Note: Optional accessories are not shown.
User’s Guide KODAK DP900 / DP1100 Projector Features Front of Projector focus ring zoom ring elevator button Rear and Side of Projector keypad front of projector connector panel elevator button power cord connector power switch speaker Connector Panel s-video 4 composite connector L/R audio in (for video source) cable hub connector computer audio in 3/99
Connecting the Projector You can connect your projector to a laptop computer, desktop computer, or video player. All connections are made with the aid of icons on the cables. The cables with their icons are shown here. Caution: Make sure your projector, computer and video player are turned off before you connect them.
User’s Guide KODAK DP900 / DP1100 Connecting to a Laptop Computer audio cable cable hub connector mouse cable 1. Connect the end of the cable hub connector to the connector on the projector’s connector panel. 2. Plug the end of the cable hub connector into the video connector on your laptop. 3. Plug either end of the audio cable into the audio connector on your computer; plug the other end of the audio cable into the connector on the cable hub. 4.
Connecting the Projector ENGLISH Connecting to a Desktop Computer audio cable mouse cable hub connector monitor cable 1. Connect the end of the cable hub connector to the connector on the projector’s connector panel. 2. Locate the cable that connects your monitor to your computer and unplug it from the computer. 3. Plug your monitor cable into the hub. connector on the cable 4. Plug the end of the cable hub into the monitor connector on your computer. 5.
User’s Guide KODAK DP900 / DP1100 6. Unplug the mouse cable from your computer and plug the end of the PS/2 mouse cable into the mouse connector on your computer. Then plug the the end of the PS/2 mouse cable into connector on the cable hub. Or if you have a USB connection: Plug the end of the USB mouse cable into the USB mouse connector on your computer and plug the the USB mouse cable into the end of connector on the cable hub.
Connecting the Projector If your video player uses a round, one-prong composite video connector, you need only the A/V cable that was shipped with the projector. If your video player uses a round, four-prong S-video connector, you need an S-video cable in addition to the A/V cable. Note: The S-video cable is sold separately. To order the cable, refer to the Reference Manual. Connecting with an AV Cable audio/video cable 1.
User’s Guide KODAK DP900 / DP1100 Connecting with an S-video Cable S-video cable A/V cable 1. Connect the S-video cable to the “s-video out” connector on the video player. 2. Plug the other end of the cable into the “s-video” connector on the projector. 3. Connect the white and red AV cable connectors to the video player and to the projector. The yellow connectors on the A/V cable are not connected to anything when used with the S-video cable.
Starting the Projector 1. Remove the lens cap. 2. Plug the power cord into the side of the projector, then plug it into your electrical outlet. Power switch Power cord connection 3. Press the “I” side of the power switch to turn on the projector. The Kodak start-up screen appears and the power LED on top of the projector lights up. 4. Turn on your video source - a video player or a computer. The video image appears on the projection screen.
User’s Guide KODAK DP900 / DP1100 5. Position the projector and adjust the zoom setting for the image size you want. -3 .7 .0 m ft. 9 -. 5 ft. 1.5 m 20 ft. 6m ft. 6 -1 m .4 4.9 12 8 3. ft. .7 -9 3m 4 7. . 3 2 5 ft. 1.5 m 12 12 ft. 3.7 m ft. .6 -3 m 1 0 3. - 1. .9 DP1100 ft. 6 2. m - 1 3.8 6 9. 9 2. ft. .6 m - 7 2.3 8 5. .8 1 4 2. DP900 12 ft. 3.7 m 20 ft.
Starting the Projector • • • • Adjust the zoom ring Focus by rotating focus lens. Be sure the projector is at a 90-degree angle to the screen. Adjust the height of the projector. Press and hold the elevator button. Raise the projector to the height you want, then release the button. elevator button 3/99 13 ENGLISH 6. Make basic image adjustments. (Refer to the Reference Manual for advanced image adjustments.
User’s Guide KODAK DP900 / DP1100 Using the Remote Control Point the remote control at the projection screen or at the front or rear of the projector. For best results, point the remote directly at the projector. The range for optimum operation is about 40 feet (12 m). The remote has four function buttons, a disk mouse and two mouse buttons, one on the top of the remote and one on the bottom.
Using the Keypad The keypad is lit green while the menus are displayed and is lit orange when the projector is on. While the menus are displayed, the volume, source, and standby buttons act as navigation buttons.
User’s Guide KODAK DP900 / DP1100 To view the on-screen menus, press the button on the keypad or remote. The menu bar appears and the volume, source, and standby buttons become navigation buttons. To select a menu, use the keypad or the remote control to move the cursor left and right to highlight the menu you want. The drop-down menu appears. To change a menu setting, use the up and down navigation buttons on the keypad or the disk mouse on the remote to move the cursor to the desired item.
Turning Off the Projector To turn off the projector for a short period of time, press the button on the keypad or remote control. This blanks the screen for a preset amount of time but keeps the projector running. After the set amount of time elapses again, the lamp turns off. To exit standby mode, press the button again. To completely turn off the projector, press the “0” side of the power switch on the side of the projector.
User’s Guide KODAK DP900 / DP1100 For More Information The first place to look for help is in the Reference Manual. Be sure to check the guidelines in “Troubleshooting.” Online Services Contact Kodak via: World Wide Web http://www.kodak.com (click on Service and Support) America Online (keyword) KODAK CompuServe GO KODAK Kodak Internet List Server photo-cd@info.kodak.com; or ftp.kodak.com Faxed Information Kodak offers automated support by fax: 18 U.S.
For More Information If you have questions concerning the operation of your KODAK projector, you can speak directly to a customer support representative. Have the projector serial number ready, and be at your computer with your projector when you call. In the U.S. and Canada call toll free, 1-888-375-6325, between the hours of 9:00 a.m. and 8:00 p.m. (Eastern Standard Time) Monday through Friday.
Eastman Kodak Company 343 State Street Rochester, New York 14650 Kodak is a trademark of Eastman Kodak Company. PN 009-0405-00 3/99 ©Eastman Kodak Company Printed in the U.S.A.
