KODAK EASYSHARE Digital Frame Extended user guide D830/D1030 www.kodak.com For help with your digital frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2009 All screen images are simulated. Kodak, EasyShare, and Perfect Touch are trademarks of Eastman Kodak Company.
Product features Front/Side Views 1 4 5 2 6 7 8 3 1 LCD screen Quick Touch Borders: 4 Mode button 5 Power button 2 Side touch lights—tap only 6 USB connector 3 Bottom touch lights—slide between or tap arrows 7 Memory card slot - SD/SDHC/MMC/MS/XD 8 Memory card slot - MS Duo/Pro Duo NOTE: When your hand is within 1 - 3 inches (2.5 - 7.6 cm) of the borders, the lights turn on and indicate where to touch. Tap the lights to turn on the screen icons. To use the Quick Touch Borders, see page 4. www.
Back View 1 4 3 2 ii 1 Faceplate attach clips (4) 3 Rotating stand 2 DC-In 4 Wall mounting holes (3) www.kodak.
Table of contents 1 1 Getting started ......................................................................................1 Setting up your frame.................................................................................... 1 Navigating using the Quick Touch Borders..................................................... 4 Setting your language ................................................................................... 6 Setting the clock, date, and timer .....................................
Table of contents Changing frame settings ............................................................................. 29 Settings menus ........................................................................................... 29 Upgrading your firmware (recommended) .................................................... 32 Maintaining your frame............................................................................... 33 Learning more about your frame.................................................
1 Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler! Setting up your frame Attaching the stand Snap the stand into a slot in the back of the frame. To adjust the display angle, move the stand to a different slot. When displayed with the stand extended, the frame rests at a 68 - 90 degree angle. Your frame displays pictures in landscape orientation orientation , see page 23. www.kodak.com/go/support .
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 2 www.kodak.
Getting started Turning your frame on and off Power button - press and hold (for about 2 seconds), then release When you turn off the frame (but leave it plugged in), it retains information, like the time and date. www.kodak.
Getting started Navigating using the Quick Touch Borders IMPORTANT: The display screen is not touch-sensitive. Do not touch it. Instead, tap the lights in the right and bottom borders. Right border tap lights Right border icons Menu Play Up Down Move thru the menus and thumbnail rows OK Bottom border tap arrow lights or slide to move thru items on screen Hover within 1 - 3 inches (2.5 - 7.6 cm) of any border to turn on the lights. Tap the right or bottom border to turn on the icons.
Getting started Tapping on the right border ■ Tap the light next to an icon to select it. Icons change color when they’re selected. ■ Tap the light next to the up/down arrows to move up or down through menus or rows of thumbnails. ■ Tap the light next to OK or highlighted item. to select the Tapping and sliding on the bottom border ■ Tap the arrow lights to move the highlight one picture, menu, or item at a time.
Getting started Setting your language The language screen appears the first time you turn on your frame. Tap arrows ■ Tap the light next to an up/down arrow highlight your language, then tap OK. to To change the language at a later time: ■ OK ■ Tap (Menu). Tap the down arrow to highlight (Settings); tap the down arrow to highlight Language. The language screen appears. Tap an up/down arrow to highlight your language, then tap OK. To use the Quick Touch Borders, see page 4.
Getting started 3 Set the clock. Tap the down arrow to highlight Clock, then slide or tap between the left/right arrow lights to select the current time (based on a 24-hour clock). 4 Set the date. Tap the down arrow to highlight Year/Month/Day, then slide or tap between the left/right arrow lights to select the current date (three separate settings). Slide between the arrow lights. Press and hold to move quickly through the time and date settings. 5 Set automatic on and off times.
Getting started Inserting a memory card To insert a card, push it firmly into the slot until it clicks and stops. To remove a card, push it in to release it, then pull it out of the slot. Top slot*: MS (MEMORY STICK) XD MMC (MULTIMEDIA Card) SECURE DIGITAL/SECURE DIGITAL High Capacity (SD/SDHC) Bottom slot: MS/MS Pro Duo (MEMORY STICK) *IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove.
Getting started Attaching the included faceplate To attach To remove You can also personalize your KODAK EASYSHARE Digital Frame by putting a standard picture frame over the digital frame’s panel. See Adding a new standard picture frame, page 24. www.kodak.
2 Viewing pictures View pictures from your frame’s internal memory or any connected picture source (memory card, USB device). Enjoying your pictures immediately! To view your pictures or play a slide show, insert a memory card or other USB device (see page 8). Your pictures play automatically. NOTE: Your frame may have pre-loaded pictures, which start playing if you do not insert a memory card or USB device with your own pictures. You cannot delete the pre-loaded pictures. 10 www.kodak.
Viewing pictures Viewing your pictures View your pictures from the frame’s internal memory or any connected picture source. 1 Tap (Menu), then tap (Pictures). All connected sources and internal memory are listed. 2 Tap an up/down arrow source, then: Up/down arrows to highlight a picture ■ Tap (Play) to start a slide show of the pictures in the highlighted source. ■ Or, tap OK to view thumbnails of the pictures in the highlighted source.
Viewing pictures ■ You can change the duration (how long each picture stays on the screen) and transition style between pictures. See Changing frame settings, page 29. ■ Pictures play continuously until you turn off the frame or change modes. Changing viewing modes Press the Mode button for quick access to the four viewing modes on your frame: Pictures & Videos, Collage, Clock, and Calendar. Each time you press the Mode button, the frame advances to the next mode.
Viewing pictures Viewing pictures in collage mode View a revolving six-picture slide show. Press the Mode button to play your pictures in collage mode . Mode button ■ Tap a right/left arrow to highlight a different picture in the collage. ■ Tap the right or bottom border to pause play and highlight the current picture. ■ While play is paused, tap OK to display the highlighted picture in full screen, single view. ■ While play is paused, tap page 16).
Viewing pictures Viewing thumbnails There are two ways to view your pictures as thumbnails: Thumbnails screen First, from the picture source list: 1 Tap a touch border to display the icons, then tap 2 Tap (Menu). (Pictures). 3 Tap an up/down arrow to select a picture source, then tap OK (see page 11). Pictures are displayed as thumbnails. Second, while pictures are playing or from a single view: 1 Tap a touch border to display the icons, then tap 2 Tap (Menu). (Thumbnails).
Viewing pictures Viewing a single picture ■ To view a single, full-screen picture, highlight it in thumbnails view, then tap OK. ■ Or, when a slide show is playing, tap a Quick Touch Border (right or bottom). The slide show is paused and the picture in view is displayed. Tap OK to hide the icons and lights. Saving a default play location Save the picture source where you usually store your favorite pictures (internal memory, memory card, USB drive, etc.) as your default go-to location.
3 Doing more with your frame Accessing menu options Use the Menu button to view and work with your pictures, and to change your frame settings (see page 29). NOTE: As your hand approaches the frame, lights turn on indicating where to touch on the Quick Touch Borders. Tap the right border to see the screen icons. 1 Tap (Menu). 2 Tap an up/down arrow to highlight a menu option, then tap OK. IMPORTANT: You may need to keep tapping the up/down arrows to see a complete list of available options.
Doing more with your frame Tap OK after highlighting an option Description Multi-select Available from the Thumbnails menu only Select multiple pictures and videos for copy, rotate, delete, or play (see page 18). Select/Deselect All Select or deselect everything in your current picture source (see page 18). Copy See Copying on your frame, page 19. Rotate See Rotating pictures, page 20. Delete See Deleting pictures, page 20.
Doing more with your frame Selecting multiple pictures Use the multi-select feature to copy, delete, or rotate multiple pictures at once. Or select just the pictures you want to play in a slide show. 1 Tap (Menu), then tap the down arrow highlight Thumbnails. Tap OK. Up/down arrows Arrow lights 18 2 Tap the down arrow then tap OK. to to highlight Multi-Select, 3 To find and highlight a picture, tap the arrow lights or slide between them, then tap (Select).
Doing more with your frame Copying on your frame Copy pictures or slide shows from your current viewing location to other connected devices (see page 8). For example, copy pictures from a memory card* into your frame’s internal memory. * HINT: Share the digital pictures from your camera or computer—take the card out of your camera or copy pictures from your computer to a memory card.
Doing more with your frame Rotating pictures 1 Highlight a picture in thumbnails view (see page 14) or display it in single view (see page 15). To select multiple pictures, see page 18. 2 Tap (Menu), then tap 3 Tap an up/down arrow tap OK. (Rotate). to highlight the direction and degree of rotation, then Highlight Exit and tap OK to return to the picture without rotating it. Deleting pictures CAUTION: Removing a card or disconnecting a device while deleting may damage your card, pictures, or device.
Doing more with your frame Creating and playing a multimedia slide show Use KODAK EASYSHARE Digital Display Software on your computer to create a multimedia slide show (WINDOWS OS only). Then copy the slide show to your frame. NOTE: D830/D1030 Digital Frames do not support audio or video playback. Therefore, audio and video portions of a multimedia slide show (if included) do not play on your frame. Before you proceed, make sure you download and install the software.
Doing more with your frame 2 Click the Slide Show Editor tab. 6 3 2 4 3 In Picture & Videos, click the folder or location that contains the files you want to add to the slide show. 4 In the Viewer pane, select the pictures, then drag and drop them to the Slide Show Editor. Drag pictures in the Editor to change the play order. 5 5 Click Save. 6 For more details on creating multimedia slide shows, click Help.
Doing more with your frame Changing your frame orientation Your frame is set up to display pictures and videos in landscape orientation. You can turn the frame on its side to change the orientation to portrait. But, you must also change the orientation setting to portrait. Landscape Portrait Change the stand position Rotate the stand 90 º. To adjust the display angle, move the stand to a different slot. Change the frame orientation setting 1 Tap (Menu), then tap 2 Tap the down arrow (Settings).
Doing more with your frame Adding a new standard picture frame You can personalize your KODAK EASYSHARE Digital Frame by putting a standard picture frame over the digital frame’s panel. Match your home décor and style by choosing from the thousands of standard picture frames on the market, even a favorite you might already have. Choosing a standard picture frame size KODAK EASYSHARE Digital Frame model Use a standard picture frame that accommodates this photo size (without a matte) D830 8" x 10" (20.
Doing more with your frame The following types of standard picture frames will not fit on your EASYSHARE Digital Frame. ■ Frames that secure a photo by pressing it between two pieces of glass. ■ A deep frame that’s designed to hold 3-dimensional objects instead of photos. ■ Frames with inserts in which the insert holds the standard picture size. ■ Frames with a hinged or otherwise non-removable back. ■ Frames with a curved or uneven mounting surface.
Doing more with your frame Attach a slot-style standard picture frame SLOT-style Glass removed ■ Use the clips that are attached to the digital frame’s back panel. ■ Rotate and depress the clips as needed to engage the slot in the standard frame. If necessary: ■ If a deep picture frame places the slot above the clips, carefully bend the clips up—slightly above the slot. Then, rotate and depress the clips to slide them into the slot. ■ Tighten the screws to secure the clips.
Doing more with your frame Attach a clip-style standard picture frame CLIP-style Foam spacers Glass removed ■ Use the clips that are attached to the standard picture frame. ■ Use the included self-stick foam spacers to fill any gap between the digital frame’s back panel and the clips on the standard frame. Stack the spacers if necessary. Avoid adding more spacers than necessary to prevent excessive force against the clips. If necessary: ■ Tighten the screws to secure the clips.
Doing more with your frame Attach a bendable metal tab-style standard picture frame TAB-style Foam spacers Glass removed ■ Bend the metal tabs down to secure the digital frame to the standard frame. ■ If necessary, use the included self-stick foam spacers to fill any gap between the digital frame’s back panel and the metal tabs. Hanging your frame on the wall To hang your frame on the wall, remove the stand, then use wall anchoring hardware (not included) to securely mount the frame to the wall.
4 Changing settings and more Changing frame settings The options in the Settings menu let you customize and configure your frame. IMPORTANT: You may need to keep tapping the up/down arrows to see the complete list of available options. 1 Tap (Menu), then tap 2 Tap the up/down arrows (Settings). to highlight a setting, then tap OK. 3 Follow the on-screen instructions. Tap OK to accept your selections. 4 Tap (Play) to return to playback from the current image. Tap return to the top level menu.
Changing settings and more Setting Options Default Play Location Yes—confirm the current picture source as your default go-to Save the current picture source location. as your default go-to location. No—exit the menu. Clear My Default Play Location—delete reference to the currently designated picture source. See Saving a default play location, page 15. Shuffle On (default)—play pictures in random order. Off—play pictures by the current Display Picture Order By setting (see page 31).
Changing settings and more Setting Options Fit or Fill Specify how to scale the pictures on the screen. Fit—show the whole picture. Black borders may appear around the image. Fill (default)—the picture fills the entire screen; some of the picture may be cut off (cropped). KODAK PERFECT TOUCH Technology Automatically enhance your pictures to look their best on your frame. On—automatically enhance your pictures. Off (default)—display pictures without corrections.
Changing settings and more Upgrading your firmware (recommended) Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to www.kodak.com/go/digitalframedownloads. 2 Follow the screen directions to download the frame firmware to your computer.
Changing settings and more Maintaining your frame IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes Learn more about your frame www.kodak.
5 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Step-by-Step Solutions & Repair. Picture frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 2). ■ Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.
Troubleshooting and support If... Try one or more of the following Frame freezes up or ■ Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then doesn’t work properly. release. ■ Reset the frame. Press the Mode and Power buttons (see page ii) at the same time, then tap Yes to reset the frame. (Resetting your frame does not erase your saved files.
Troubleshooting and support Resetting the clock and calendar after losing power If you turn off the power on the frame or otherwise lose power for half a day or more, the clock and calendar return to the factory setting and the automatic on/off times, if set, are disabled. When you turn the frame back on, the set time and date screen appears. 1 Set the clock. Tap the arrow lights or slide to select the current time. 2 Set the date.
Troubleshooting and support Screen messages Screen message Try one or more of the following File is bad. (usually preceded by the file name. For example: xxx_xxxx.JPG file is bad) The frame is unable to display the picture because the file is corrupted or it’s an unsupported file format (see page 39). Create file failed. The device (memory card, USB drive, etc.) you are trying to copy to is protected. ■ See your device documentation to remove write protection. ■ Insert or connect a different device.
Troubleshooting and support Screen message Try one or more of the following Error attempting to open file or directory. ■ Turn off the frame, then turn it back on. Press and Error duplicate filename. Error occurred while closing a file. hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport. Error invalid filename. Error reading from file. Error writing from file. Error writing a file.
6 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. KODAK EASYSHARE D830/D1030 Digital Frames Color display D830 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.3 x 11.4 cm (6.4 x 4.8 in.) viewable area D1030 26.4 cm (10.4 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 21.1 x 15.8 cm (8.3 x 6.2 in.
Appendix KODAK EASYSHARE D830/D1030 Digital Frames Size (w/o faceplate) D830: 25.3 x 20.2 x 3.5 cm (10 x 7.9 x 1.4 in.) D1030: 32.9 x 25.3 x 3.5 cm (13 x 10 x 1.4 in.) Weight (w/o faceplate) D830: 843 gm (1.9 lb.) includes frame, stand, and AC adapter D1030: 1227 gm (2.6 lb.) includes frame, stand, and AC adapter Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel.
Appendix Additional care and maintenance ■ To clean the frame or screen, use a soft, lint-free cloth dampened with lens cleaning solution or a water-based cleaning solution Use light pressure. ■ Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements are available in some countries. Contact a dealer of Kodak products for more information. ■ For digital frame disposal or recycling information, contact your local authorities.
Appendix replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control.
Appendix Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Appendix Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Hereby, Eastman Kodak Company declares that this Kodak Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Appendix Waste Electrical and Electronic Equipment labeling/battery disposal In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment at a collection facility established for this purpose (separate from municipal waste). For more information, contact your retailer, collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. Product weight with adapter and stand: D830, 843 gm.
Appendix China RoHS 46 www.kodak.
1 Index A about, frame, 31 AC adapter, 2, 40 appendix, 39 attaching different standard frame, 24 faceplate, included, 9 power cable, 2 stand, 1 automatic on/off, setting, 7 resizing during copy, 30 B border, touch, 4 brightness, 30 button, mode, i, 12 C cable power, connecting, 2 USB, connecting, 8 calendar, viewing mode, 12 card, memory inserting, 8 slot, i supported types, 39 changing picture locations, 11 cleaning frame, 33, 41 clock and timer, setting, 6, 36 clock, viewing mode, 12 collage mode, 13 www
Index specifications, 39 troubleshooting, 34 turn on/off, 3 freeze or lock screen, reset, 35 G go-to play location, 15 H help frame, 34 support URLs, 33 troubleshooting and support, 34 I installing EASYSHARE Digital Display Software, 21 included faceplate, 9 memory cards, 8 standard picture frame, 24 internal memory capacity, 39 copying to, 19 K KODAK PERFECT TOUCH Technology, 31 L landscape, set orientation, 23 language, setting, 6 locked screen, reset, 35 48 M memory card.
Index power button, i, 3 connecting, 2 specifications, 39 Q quick touch border, 4 R recycling, disposal, 41 regulatory compliance, 43 reset frame, 35 S safety information, 40 screen cleaning, 33, 41 error messages, 37 selecting menus and pictures, 4 multiple pictures, 18 setting auto on/off, 7 clock after losing power, 36 settings, 29 about this frame, 31 automatic resizing, 30 brightness, 30 clock and timer, 6 display picture order by, 31 duration, 29 firmware upgrade, 32 fit/fill, 31 frame orientation, 2
Index firmware, 29 software and firmware, 40 USB device, connecting, 8 V viewing modes, changing, 12 picture sources, 11 single picture, 15 thumbnails, 14 viewing mode button, i W wall mount, frame, 28 warranty, 41 Web sites, help, 33 50 www.kodak.
