User's guide zoom digital camera EasyShare DX7440

Getting started
6 www.kodak.com/go/support
Storing pictures on an SD/MMC card
Your camera has 32 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card. Do not insert or remove a card
when the green ready light is blinking; doing so may
damage your pictures, card, or camera.
1 Turn off the camera, then open the card door.
2 Orient the card as shown on the camera body.
3 Push the card all the way into the slot.
4 Close the door.
To remove the card, turn off the camera. Push
the card in, then release it. When the card is
partially ejected, pull it out.
See page 53 for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or www.kodak.com/go/dx7440accessories.
NOTE: When using a card for the first time, we suggest you format it before taking pictures. (See
page 26.) We cannot guarantee compatibility with “high-speed” SD cards such as xSD or
Ultra-2; these cards are designed primarily for video or audio.
Using optional lenses
Expand your creativity with a selection of Kodak accessory lenses, offered in
wide angle, telephoto, and close-up. See a dealer of Kodak products or
www.kodak.com/go/dx7440accessories.
Notched
corner