Operation Manual

Chapter 8
Device not Recognized
Probable Cause
Any of the following can prevent your Kodak printer from reading a connected digital camera, USB
thumb drive, or memory card.
• The camera is turned OFF.
• The USB connector from the camera is not fully inserted in the port.
• The memory card is not completely inserted.
• The memory card is in backwards.
• The memory card file system is corrupt.
• Make sure camera is in “connect” mode (PTP).
• More than one memory card inserted.
• The USB device is not supported.
Corrective Action
• Correct any connection problems and try again.
• If the memory card file system is corrupt, reformat it in your camera.
• Disconnect the unsupported device.
Ink Cartridge Not Recognized
Probable Cause 1
Generic or non-Kodak ink cartridges may not function in the KODAK EASYSHARE All-in-One Printer.
Kodak recommends using Kodak ink cartridges.
Corrective Action
Install a genuine Kodak ink cartridge.
Probable Cause 2
One of the ink cartridges has expired and needs to be replaced.
Corrective Action
Replace the expired ink cartridge.
44 Kodak ESP 3 All-in-One