Kodak EasyShare digital picture frame User’s guide for SV-710, SV-811, EX-811, EX-1011 www.kodak.com For help with your picture frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2007 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.
Product features Front View 1 1 LCD screen 2 2 Faceplate 3 3 Remote control sensor Back/Left Side View 2 1 1 2 3 Slide the holder 7 into slots. 4 5 6 1 Speakers 5 Memory card slot - SD, MS, xD, MMC 2 Wall mount hangers 6 On/Off switch 3 Frame stand 7 Remote control holder (removable) 4 Memory card slot - CF, MD www.kodak.
Product features Top/Right Side View 1 2 3 4 5 6 7 8 9 10 11 12 13 1 Picture/music toggle 2 Play/Pause 8 USB connector (All models, use to connect to computer; EX models, also use to connect to camera/USB device with adapter cable.) 3 Stop/Back 9 USB connector (SV models only, use to connect to camera/USB device. Not available on EX models.) 4 Menu 5 OK 10 Volume control 6 Down 11 Headphone jack 7 Up 12 DC-In (12 V) 13 Reset button ii www.kodak.
Table of contents 1 1 Getting started ......................................................................................1 Installing the software................................................................................... 1 Using the remote control............................................................................... 2 Activating the remote control ................................................................... 2 Storing the remote control...........................................
Table of contents Printing pictures.......................................................................................... 13 Connecting the frame to a PictBridge enabled printer.............................. 13 Printing from a PictBridge enabled printer............................................... 14 Manually changing connection mode...................................................... 14 Playing music..............................................................................................
Table of contents Additional care and maintenance ................................................................ 37 Limited warranty ......................................................................................... 38 Limited warranty coverage...................................................................... 38 Limitations ............................................................................................. 38 Your rights ...............................................................
1 Getting started Welcome to your Kodak EasyShare digital picture frame. Viewing your pictures and videos couldn’t be simpler! Installing the software Install the software from the CD included with your frame. The software, which includes the latest version of Kodak EasyShare software, ensures the best experience when connecting the frame with your computer. 1 Close all software applications that are open on your computer (including anti-virus software, see the anti-virus software manual for details.).
Getting started Using the remote control Activating the remote control An activation tab protects the remote control’s battery during shipment. ■ Pull out the tab to start using the remote. There is no need to open the battery compartment or remove the battery. Storing the remote control 1 Install the remote control holder on the back of the frame (page i). 2 Slide the remote into the holder for convenient, out-of-the-way storage. www.kodak.
Getting started Using the remote control buttons Some buttons are also on the back of the frame (page ii). They operate identically. Button power* back menu OK Press to: turn on/off the picture frame. home return to the home screen. music/pics toggle between viewing pictures and selecting music. menu display the menu choices. back return to the previous screen. stop a slide show, display thumbnails. OK accept the current selection. 4-way navigate through pictures or menus.
Getting started Setting up your picture frame Buttons and controls back All buttons and controls described in this guide (for example: press ) are on the remote control unless otherwise noted. menu OK Connecting the power cable 1 Plug in the power cable. Your power cable (included with the frame) may be different from the one pictured. Use the plug that accommodates your type of power outlet. 2 Pull out and extend the stand on the frame back and place the frame on a flat, stable surface.
Getting started Inserting a card or camera ■ Insert a memory card. CompactFlash MicroDrive Secure Digital Memory Stick xD MultiMedia Card ■ Connect a digital camera or other USB device. EX models SV models b) a) a) a) USB cable included with your USB device. b) USB adapter cable included with your EX model picture frame. 5 www.kodak.
Getting started Turning on the frame Press the power switch to On. NOTE: You can leave the power switch On, and use the remote control to turn the frame off and on. ■ Setting your language The language screen appears the first time you turn on your frame. ■ Press to select your language, then press OK. To change the language at a later time, press Home , Settings →Language. See page 18. Viewing your first slide show! ■ A slide show starts automatically when you turn on the frame.
2 Viewing pictures and videos When you turn on your frame, a slide show automatically starts. Depending on where pictures are stored in your frame or what devices are connected—the slide show plays from a memory card first, then from a USB device, and internal memory (My Frame), in that order. Running a slide show ■ A new slide show starts automatically when you insert a card or connect a USB device. The new slide show replaces whatever is currently displayed (slide show, thumbnails, single picture).
Viewing pictures and videos Viewing a single picture ■ To view a single, full-screen picture, highlight it in thumbnails view and press OK. ■ To magnify a picture up to 8X, press repeatedly. To view other parts of the picture, press . Press repeatedly to return. ■ To rotate a picture, press . Playing a video ■ In thumbnails view, videos are marked with and press OK. ■ During a slide show, videos play automatically. When the video ends, the slide show resumes.
Viewing pictures and videos Choosing a different picture location You can view pictures from different locations or sources. 1 On the remote control, press Home . Only available picture locations appear . 2 Press to highlight a picture location. 3 Press OK to display thumbnails of the pictures in that location. 4 Pess to start a slide show. Or, navigate through folders or albums to your pictures, then press .
3 Doing more with your frame Copying pictures on your frame Copy pictures/videos from your current picture location to any other connected device or location. For example, copy pictures from a memory card to the frame’s internal memory (My Frame). 1 Press 2 Press to find a picture/video, then press . to highlight Copy, then press OK. 3 Press to highlight the location you want to copy to, then press OK. The picture/video is copied. To copy multiple pictures/videos, see page 12.
Doing more with your frame Copying pictures to/from your computer Copy pictures between your frame and your computer using your computer’s normal file copying tools. See page 35 for the file formats that the frame can display. 1 Connect the USB cable from the frame to your computer (see page 10). 2 On your computer, open My Computer or Windows Explorer.
Doing more with your frame Deleting pictures/videos 1 Press 2 Press to find a picture/video, then press . to highlight Delete, then press OK. 3 Highlight Delete and press OK again to confirm. To cancel the deletion, highlight Exit and press OK. The picture/video is deleted. To delete multiple pictures/videos, see page 12. NOTE: You can delete pictures/videos from a card, internal memory, and some USB devices.
Doing more with your frame Selecting all 1 Press whenever pictures/videos are displayed (slide show, video, single picture). 2 Press to highlight Select all, then press OK. A confirmation screen appears, then your picture display reappears. A check mark is displayed on all pictures/videos in your current location. 3 To remove all check marks, press Select / Unselect all and press OK. , highlight 4 Highlight Unselect all and press OK. A confirmation screen appears, then your picture display reappears.
Doing more with your frame Printing from a PictBridge enabled printer 1 Turn on the printer. Turn on the frame. The USB connection mode screen appears on the frame. 2 Change your connection mode from computer to printer. Select Connect to printer, then press OK. If the USB connection mode screen does not automatically appear, change the connection mode manually, see Manually changing connection mode, page 14. 3 If you are in a slide show or single view, press press to find a picture, then press .
Doing more with your frame Playing music 1 Press . Your picture or slide show is paused. 2 Press OK. to highlight your music location. Then press 3 Press to locate your music files. Then press OK. 4 Press to go to the next or previous song, or select Play all songs. Then press OK. Your music starts playing. 5 Press to return to your picture or slide show. Your selected music continues to play as the slide show resumes. When music is playing, videos play without their related audio.
4 Changing frame settings The options in the Setup menu let you customize and configure your frame. 1 Press Home 2 Press . to highlight Settings , then press OK. 3 Choose a setting and follow the screen directions. Press OK to accept your selections. 4 Press the Back button to exit. Settings menus Setting Options Upgrade firmware Upgrade firmware—load the latest version of firmware on This option is only displayed if your frame (page 18). the upgrade file (.img) is Exit—return to the Home screen.
Changing frame settings Setting Options Viewing options Slide duration—specify how long each picture is displayed in a slide show, from 3 seconds (default) to 1 hour. Frame orientation—specify whether you wish to display your frame in landscape (default) or portrait orientation. Transitions—specify the transition style between pictures in a slide show. See screen for options. The default is Random. Screen Fit or Fill—Fit entire image (default). Show the entire picture.
Changing frame settings Setting Options Device configuration Frame name—EX models only. Assign a name to your frame. This name is referenced when connecting to your wireless network. USB connection mode—When you plug in a USB cable, choose to Connect to computer (default) or Connect to printer. Language Choose your language. About Check your frame model number and firmware version. Upgrading your firmware Firmware is the software that runs on your frame.
5 Using Wi-Fi mode—EX models only Wireless operation is available on Kodak EasyShare EX-811 and EX-1011 digital picture frames. For more information on wireless operation and networks, visit www.kodak.com/go/wifisupport or www.wi-fi.org. What are some of the wireless features of my frame? ■ Display pictures on your frame directly from your computer hard drive (see page 21). ■ Display pictures from your Kodak EasyShare Gallery albums (see page 22).
Using Wi-Fi mode—EX models only Perform the setup 1 Make sure your computer and router are on. 2 Remove all memory cards or other USB devices from your frame. Turn it on. The first time you turn on your frame (after you select your language), the Network connection screen appears. 3 When asked "Do you want to connect your frame to a wireless network?", select Yes, then press OK to begin scanning for available networks.
Using Wi-Fi mode—EX models only Set up your network at a later time The first time you turn on your frame, the Network connection screen appears and asks if you want to connect your frame to a wireless network. You can answer No and perform the setup at a more convenient time. 1 Press , then go to Settings → Manual → Enable/Disable connections. 2 Select Enable, then press the Back button. 3 Select Network again, then Scan for wireless networks. 4 Continue with step 4 of the setup directions on page 20.
Using Wi-Fi mode—EX models only Setting up your Gallery account You can display pictures directly from the Kodak EasyShare Gallery via the Internet. Perform this one-time setup to connect your frame to your existing Gallery account. 1 Press Home , then highlight Settings and press OK. 2 Select Kodak Gallery and press OK. 3 If you are outside the United States, select your location and press OK. 4 Select Username.
Using Wi-Fi mode—EX models only Creating My Slideshow Designate any picture location on your home computer or from the Gallery as My Slideshow. My Slideshow will run automatically each time you turn on your frame. 1 When viewing thumbnails, a slideshow, or a single view picture, press . 2 Select Set as My Slideshow, then press OK. The pictures/videos in your current viewing location will now be included in the slideshow that plays each time the frame is turned on. You can also play My Slideshow anytime.
Using Wi-Fi mode—EX models only Glossary of common wireless network terms Access point—(Also called AP.) A wireless network transceiver or “base station” hub, often used to connect a local area network to one or more wireless devices. An access point can also provide a communication link to a wired local area network. Ad Hoc—A client setting for a wireless local area network that allows devices connected to the network to communicate with one another directly, independent of an access point or router.
Using Wi-Fi mode—EX models only Domain name— The portion of a URL or Web address that identifies a specific Web site. For example, the domain name portion of the URL http://www.kodak.com is kodak.com. All domain names have a suffix that indicates the top level domain (TLD) it belongs to.
Using Wi-Fi mode—EX models only Encryption key—An alphanumeric (letters and/or numbers) series that enables data to be encrypted then decrypted so it can be safely shared among members of a network. WEP uses an encryption key that automatically encrypts outgoing wireless data. On the receiving side, the same encryption key enables the computer to automatically decrypt the information so it can be read.
Using Wi-Fi mode—EX models only the unique SSID. An SSID can be broadcast by the network router, allowing devices to detect it as an available network. An SSID does not supply security to the network. SSL—Secure Sockets Layer: a commonly used encryption scheme used by many online retail and banking sites to protect the financial integrity of transactions. TCP/IP—Transmission Control Protocol/Internet Protocol: the underlying technology behind the Internet and communications between computers in a network.
6 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. Picture frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable is securely connected (page 4). ■ Make sure you are using the power cable that was included with your frame. ■ Make sure the power switch on the frame is On (page 6). Remote control does not function.
Troubleshooting and support If... Try one or more of the following Cannot copy pictures from Kodak EasyShare software. ■ Make sure your frame and computer are on. ■ Make sure the USB cable is securely connected (page 10). ■ Make sure you have installed the latest version of EasyShare software (page 1). ■ From My Collection in EasyShare software, make sure the pictures are in the Picture Tray.
Troubleshooting and support Problem Possible causes and/or solutions (Continued from previous ■ Make sure the network profile settings on your frame match those of the network. In an Infrastructure network, you can table) usually view the network settings with the software program Frame cannot connect to included with the router or through the interface of a the wireless network — connected device. See the router or device documentation for details. "Wireless network not found" appears.
Troubleshooting and support Problem Possible causes and/or solutions (Continued ) The wireless router did not assign a valid network IP address to the frame. Check and change the router settings, as indicated below. You can usually view the network settings with the software program included with the router. ■ Enable DHCP on the router. ■ Change the setting on the router to allow both 802.11b and 802.11g Wi-Fi protocols.
Troubleshooting and support Screen messages Screen message Try one or more of the following Create file failed. The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected. ■ See your device documentation to remove write protection. ■ Insert or connect a different device. Error attempting to open file or directory. ■ Turn off the frame, then turn it back on. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport.
Troubleshooting and support Screen message Try one or more of the following Printing error. ■ Make sure your printer is on and the USB cable is securely connected (page 14). ■ Check your printer for more info. Time out occurred while printing. ■ Check cables and printer supplies. Print again. Unable to create file. Device write The frame was unable to copy the picture. protected or full. ■ Insert a different card or device (page 5), or change the picture location setting (page 9).
7 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. Kodak EasyShare digital picture frame Wi-Fi wireless network compatibility SV-710, SV-811 No EX-811, EX-1011 Yes. Wi-Fi 802.11b protocol—compatible with Wi-Fi wireless 802.11b and 802.11g networks. Color display SV-710 17.8 cm (7 in.) diag. analog LCD, 480 x 234 pixels, 16:9 aspect ratio, 154 x 87 mm (6.1 x 3.4 in.) viewable area SV-811, EX-811 20.3 cm (8 in.) diag.
Appendix Kodak EasyShare digital picture frame Power 100-120V AC 60Hz (US), 100-240V 50-60Hz (WW), 12V DC adapter Communication with computer USB 2.0 (PIMA 15740 protocol), via USB cable model U-8 Other features PictBridge support Yes Picture formats JPEG, EXIF 2.
Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix www.kodak.com/go/kes. ■ Do not charge non-rechargeable batteries. For more information on batteries, visit www.kodak.com/go/batterytypes. ■ Digital picture frame and remote control battery may include perchlorate material. Special handling may apply in California. ■ Read and follow all warnings and instructions supplied by the battery manufacturer. CAUTION: EX models only: When using this product, it should be installed and operated with a minimum distance of 7.9 in. (20 cm) for 2.
Appendix Limited warranty Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair. Limited warranty coverage Warranty service is only available from within the country where the Products were originally purchased.
Appendix disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation.
Appendix FCC compliance and advisory Kodak EasyShare digital picture frame This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This digital picture frame EX-811 and EX-1011 transmits in 12dBm. In France, the power level is limited to 10dBm in outdoor environments, per regulations. When in France, use the wireless functions of this device indoors only.
Appendix Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory
1 Index A about, frame, 18 appendix, 34 arrow buttons on remote, 3 automatic on/off, 17 B back button on remote, 3 battery remote control, 34 safety, 36 brightness, screen, 17 buttons on back of frame, ii on remote control, 3 C cables power, connecting, 4 USB, connecting, 5 camera, connecting, 5 card.
Index flash drive, connecting, 5 frame, picture assign a name, 18 checking model, firmware, 18 product views, i setup, 4 setup wireless network, 17 specifications, 34 troubleshooting, 28 turning on/off, 6 G glossary, wireless terms, 24 H headphone jack, ii help communicating with computer, 28 connecting to Gallery, 31 frame, 28 troubleshooting problems, 28 holder, remote control, i home button on remote, 3 changing picture locations, 9 screen, 9 I installing software, 1 internal memory capacity, 34 interne
Index copying from EasyShare software, 11 copying on frame, 10 copying wireless, 23 deleting, 12 location, changing, 9 printing, 13 selecting more than one, 12 viewing, 7 play/pause, video, 8 button on remote, 3 playing music, 15 video, 8 portrait, set orientation, 17 power button on remote, 3 connecting, 4 connector, ii specifications, 35 turning on, 6 printer connection mode, 14, 18 printing, PictBridge printer, 13 R recycling, disposal, 37 regulatory compliance, 40 remote control activating, 2 battery t
Index slide transitions, setting, 17 software installing, 1 upgrading, 37 source, picture location, 9 speakers, i specifications, frame, 34 stand, frame, i stop button on remote, 3 video, 8 storage capacity, internal memory, 34 switch, on/off, i T thumbnails, 7 time, setting, 17 transitions, slides, setting, 17 troubleshooting error messages, 32 frame, 28 wireless network connection, 29 turning on/off frame, 6 U upgrading firmware, 16, 18 software and firmware, 37 USB connection mode, 14, 18 USB connector,