Kodak EasyShare M820/M1020 digital frame Extended user guide www.kodak.com For help with your picture frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.
Product features Front View 1 LCD screen 1 2 Touch border (tap/slide) 3 Touch border (tap only) 4 Lights 5 Raised guide 3 4 2 5 NOTE: When screen icons appear, Lights turn on at touch-sensitive points near the raised guide. To use the touch border, see page 3. Back/Right View 1 Audio In 2 Audio Out 1 3 DC-In (12V) 4 Speakers (2) 2 4 3 www.kodak.
Back/Side View 4 1 5 2 9 3 6 7 8 1 Power button 5 Volume button 2 Wall mounting holes 6 Memory card slot - CF, MD 3 Rotating/extending stand (see page 1) 7 USB connector (to camera/USB device) 4 Memory card slot - SD, MMC, MS, xD 8 USB connector (to computer) ii www.kodak.
Table of contents 1 1 Getting started ......................................................................................1 Setting up your frame.................................................................................... 1 Turning on your frame................................................................................... 2 Using your frame’s touch border.................................................................... 3 Setting your language .............................................
Table of contents Upgrading your firmware............................................................................. 26 Installing the software................................................................................. 27 Customizing your frame .............................................................................. 28 Maintaining your frame and mattes ............................................................. 28 Learning more about your frame...............................................
1 Getting started Welcome to your Kodak EasyShare M820/M1020 digital frame. Viewing your pictures couldn’t be simpler! Setting up your frame Setting up the stand Your frame displays pictures in landscape orientation, see page 6. orientation. To change to portrait Stand (pull to adjust the frame angle) When displayed with the stand extended, the frame rests at a 68-90 ° angle. www.kodak.
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 1 2 Turning on your frame Power button - press and hold (for about 2 seconds), then release 2 www.kodak.
Getting started Using your frame’s touch border Touch at the bottom (tap/slide) or right (tap only) border to find/highlight menu items or pictures. Press OK to select them. NOTE: The screen is not touch-sensitive. Do not touch. Lights appear on the border to show you where to touch. CAUTION: Only use your finger to touch the borders. Using sharp or metal objects may damage the border or screen. On the side border, tap on lights next to the icons.
Getting started Setting your language The language screen appears the first time you turn on your frame. ■ Slide or tap below slider arrows to find your language, then tap OK. To change the language at a later time: 2 ■ Tap (Home) → (Settings) → Language. The language screen appears. Slide to find your language, then tap OK. 1 Enjoying your pictures immediately! NOTE: If the software installation screen appears, dismiss it and start playing a slide show immediately.
Getting started Inserting a memory card To insert a card, push the card firmly into the slot until it stops. To remove a card from: top card slot - push in the card to release it side card slot - pull out the card Secure Digital MultiMedia Card Memory Stick xD CompactFlash CAUTION: Insert a micro or mini memory card in an adapter first, or the card will get stuck in your frame.
Getting started Turning off your frame ■ Standby mode—Press and hold the power button (for about 2 seconds), then release. ■ Power off—Unplug the power cable. Changing your frame orientation Change the frame orientation setting if you change to portrait orientation. Change the stand position and angle: Rotate the stand 90 °, then pull it out or push it in to adjust the frame angle. NOTE: When displayed with the stand extended, the frame rests at a 68-90 ° angle.
Getting started Mounting your frame on the wall Use wall-anchoring hardware (not included) to anchor your frame securely to your wall. Wall mounting holes Clip (use to reroute, secure, and center the power cable) Power cable To change to portrait orientation, turn your frame 90° and use the wall mounting holes at the top. www.kodak.
2 Viewing pictures Accessing your pictures Tap Home to access pictures, videos, music from internal memory, your memory card, and all connected devices. Use the touch borders to make your selections (see page 3). (Pictures and Videos). 1 Tap (Home) → The frame’s internal memory and connected picture sources are displayed. 2 Slide to highlight a picture source, then: ■ Tap (Slide show) to start a slide show. OR ■ Tap OK to view thumbnails.
Viewing pictures Running a slide show There are two ways to start a slide show on your frame: ■ Turn on the frame, then insert a card or connect a USB device—a new slide show starts automatically, replacing a currently running slide show or single view picture. ■ Select a picture in thumbnail view or tap Videos) to select a picture source. Then, tap (Home) → (Pictures and (Slide show). Other slide show information – A slide show plays continuously until you stop it or turn off the frame.
Viewing pictures Viewing thumbnails (multi-up) There are two ways to view your pictures as thumbnails: ■ Tap (Home) → (Pictures and Videos), then select a picture source (see page 8). Tap OK. OR, ■ From a slide show (tap the touch-sensitive border to display the icons) or from single view, tap (Multi-up). To navigate through the thumbnails, slide your finger left/right along the slider at the bottom. To move even faster through the thumbnails, touch and hold until the screen changes (about 3 seconds).
Viewing pictures Viewing pictures by filename By default, the pictures on your frame are arranged and played by date, starting with the oldest. You can play the arrangement or order by date, newest to oldest, or alphabetically by filename. NOTE: If a picture source with numerous images (greater than 500) takes too long to load, change the order to play by filename. To change the play order: 1 Select a picture source (for example, a folder with pictures), or multiple pictures (see page 20), then tap OK.
3 Doing more with your frame Playing music only 1 Tap the touch border to pause your slide show and to display the screen icons. 2 Tap (Home), then sources. (Music) to view music 3 Slide to the right/left to move up/down the music source list, then tap OK. 4 Slide right/left to go to the previous/next song, or select Play all songs, then tap OK. Your music starts playing. 5 Tap (Slide show) to return to your picture or slide show.
Doing more with your frame Playing a video ■ During a slide show, videos play automatically. When the video ends, the slide show resumes. To play a video from thumbnails view, highlight a video thumbnail, then tap OK. ■ Videos in thumbnail view: – MOV videos are indicated with . – AVI, MPEG, and MPG videos display the first frame. ■ Video control buttons: play, pause, and resume the video. rewind / fast forward. or stop the video and return to thumbnails. www.kodak.
Doing more with your frame Printing pictures Your frame is compatible with PictBridge technology, so you can print directly to PictBridge enabled printers. 1 Turn off the frame and printer. 2 Make sure your frame is disconnected from the printer. 3 On the frame, change your connection mode from Computer to Printer. See page 15. 4 Reconnect your frame to the printer, using the USB cable. Printing to a PictBridge enabled printer 1 Turn on the printer. Turn on the frame.
Doing more with your frame Manually changing USB connection mode The connection mode must match the device you connect the frame to: Computer or Printer. The default is Connect to computer. You can change the connection mode manually. 1 Disconnect the printer or computer from the frame. 2 On the frame, tap 3 Tap (Home). (Settings). 4 Slide to highlight Device configuration, then tap OK. 5 Highlight USB connection mode, then tap OK.
Doing more with your frame Copying on your frame Copy pictures from your current viewing location to other connected devices (see page 5). CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Highlight a picture to copy: In thumbnails view, slide or tap below the slider arrows to find a picture; or, display a picture in single view (see page 10). 2 Tap (Menu). 3 Tap (Copy), then OK.
Doing more with your frame Copying between your frame and computer Copy pictures, videos, and music via a USB cable. Connecting to your computer USB cable (sold separately) Copying pictures to/from your computer Drag and drop pictures, videos, and music easily between your frame and computer, then play a slide show on your frame right away. See page 33 for applicable file formats. 1 Install the software that came with your frame (see page 27).
Doing more with your frame Select pictures here (Viewer pane) Drag and drop here (Drag and Drop Zone) Pictures/videos on your computer My Devices: Internal memory Memory card Connected device 4 Click My Devices to see the folders on your frame and the connected devices. The frame appears as removable drives—one drive for each picture source on the frame’s picture source: internal memory (My Frame), and any inserted memory cards or connected devices.
Doing more with your frame Copying pictures from EasyShare software It’s easy to copy pictures/videos from My Collection to your frame. 1 Install the software that came with your frame (see page 27). 2 Set the USB connection mode to Computer (see page 15), then connect the USB cable (see page 17). 3 On your computer, open EasyShare software. Click My Collection, then select the pictures in the Viewer pane. Drag and drop them into the Picture tray. 4 In the menu bar, select File → Copy to.
Doing more with your frame Deleting pictures CAUTION: Removing a card or disconnecting a device while deleting may damage your card, pictures, or device. 1 Highlight a picture to delete: In thumbnails view, slide or tap below the slider arrows to find a picture; or, display a picture in single view. 2 Tap (Menu) → (Delete), then tap OK. 3 Tap Yes to confirm. The picture is deleted. 4 Tap (Close) to close the menu. To delete multiple pictures, see page 20.
Doing more with your frame Select/Unselect all Select all ■ In thumbnails view (page 10), tap All). (Select Unselect all ■ www.kodak.com/go/support To remove all check marks, tap Unselect All.
4 Changing settings and more Changing frame settings The options in the Settings menu let you customize and configure your frame. 1 Tap (Home), then (Settings). 2 Slide or tap below the slider arrows to highlight a setting, then tap OK. 3 Follow the on-screen instructions. Tap OK to accept your selections. 4 Tap (Back) to exit. Settings menus Setting Options Upgrade firmware Upgrade firmware—load the latest version of firmware on This option is only displayed if your frame (page 26).
Changing settings and more Setting Options Viewing options Slide duration—specify how long each picture is displayed in a slide show, from 3 seconds to 1 hour. (The default is 5 seconds.) Transitions—specify the transition style between pictures in a slide show. See screen for options. The default is Random. Shuffle—plays the images in random order.
Changing settings and more Setting Options Language Choose your language (page 4). Automatic resizing Choose to turn on or off automatic resizing of your pictures when copying. Full resolution is unnecessary and quickly fills up the frame’s memory. About Check your frame model, serial number, and firmware version. 24 www.kodak.
Changing settings and more Setting the clock and timer Manually setting the clock 1 Tap (Home), then (Settings). 2 Highlight Clock and timer, then tap OK. 3 Highlight Set time, then tap OK. 4 Slide to set the hour. Tap the right arrow to highlight the next setting (minutes), then slide to adjust it. 5 Tap OK to accept your changes. Setting automatic on/off Set your frame to turn on and off at a specified time every day. NOTE: Set the clock before enabling auto on/off. 1 Tap (Home), then (Settings).
Changing settings and more Upgrading your firmware Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to www.kodak.com/go/digitalframedownloads. 2 Follow the screen directions to download the frame firmware to your computer. 3 Copy the IMG file to a memory card or USB flash drive, then insert into the frame. See page 17 for copying files.
Changing settings and more Installing the software Follow these directions to install the software CD that was packaged with your frame. The CD contains the Kodak EasyShare software and the Kodak EasyShare digital display software. While these software applications work well independently, both applications work together for the best experience when working with your pictures (see page 17).
Changing settings and more Customizing your frame For a custom look, remove the adhesive matte (included) from its liner, align it carefully, then attach it to your frame. When you are not using the matte, reapply it to the liner and store in a plastic bag to keep the adhesive backing clean. Maintaining your frame and mattes IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts.
5 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. Picture frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 2). ■ Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.
Troubleshooting and support If... Try one or more of the following Music doesn’t play. ■ Make sure the volume is turned up (see page ii). ■ If your frame has songs you purchased, they may be protected files. Convert the files to standard (unprotected) AAC or MP3 formats. ■ Make sure you Enabled the on/off setting after you set the times, You set automatic then press OK (not Back). See page 25.
Troubleshooting and support If... Try one or more of the following Cannot copy pictures from Kodak EasyShare software. ■ Make sure your frame and computer are on. ■ Make sure the USB cable is securely connected (page 17). ■ Make sure to install the software that was packaged with your frame (page 27). ■ From My Collection in EasyShare software, make sure the pictures are in the Picture Tray. Screen messages Screen message Try one or more of the following Create file failed.
Troubleshooting and support Screen message Try one or more of the following Unable to create file. Device write The frame was unable to copy the picture. protected or full. ■ Insert a different card or device (page 5). Disk full. ■ Remove write protection, unlock card. ■ Delete pictures from card. Error attempting to open file or directory. Error duplicate filename. ■ Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release.
6 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. Kodak EasyShare M820/M1020 digital frame Color display M820 20.3 cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 4:3 or 16:9 aspect ratio, 17.6 x 10 cm (6.9 x 3.9 in.) viewable area M1020 25.4 cm (10 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect ratio, 23.5 x 14.6 cm (9.3 x 5.8 in.) viewable area Internal storage capacity M820, M1020 128 MB Power Leader Electronics Inc.
Appendix Kodak EasyShare M820/M1020 digital frame Video formats MOV, AVI, MPG, MPEG (Video formats created with digital cameras are certified for Kodak digital frames. Videos created with or copied from other sources may not play on the frame.) Music format MP3 Memory cards MMC (MultiMedia Card); SD/SDHC (Secure Digital/Secure Digital High Capacity); Memory Stick, xD; CF; MD Tripod mount 1/4 inch Temperature Operating: -4 to 140°F (-20 to 60°C) Storage: -22 to 185°F (-30 to 85°C) Size M820: 28.
Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix Additional care and maintenance ■ Wipe the frame and the LCD gently with a soft, lint-free cloth (included). Do not use cleaning solutions unless designed specifically for LCD screens. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements are available in some countries. Contact a dealer of Kodak products for more information. ■ For digital frame disposal or recycling information, contact your local authorities.
Appendix materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control.
Appendix Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Appendix FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Appendix Waste Electrical and Electronic Equipment labeling EU: It is the final user’s responsibility to discard this equipment into an approved, segregated collection scheme to enable its suitable treatment/disposal and to improve human/environmental protection. For more information, see your retailer, local authority, or www.kodak.com/go/recycle.
Appendix China RoHS Korean Class B ITE Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications www.kodak.
Appendix (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com. 42 www.kodak.
1 Index A about, frame, 24 appendix, 33 automatic on/off, 23, 25 B battery safety, 35 button macro/landscape, ii C cables USB, connecting, 5 camera, connecting, 5 changing picture locations, 8 clock and timer, setting, 23, 25 computer connecting to frame, 17 copying to/from, 17 help with communicating, 30 connection mode, 15 copying from EasyShare software, 19 to/from computer, USB, 17 D deleting pictures and videos, 20 displaying slide show, 9 disposal, recycling, 36 doing more with your frame, 12 www.
Index capacity, 33 L landscape, set orientation, 23 language setting, 24 setting first time, 4 loading software, 27 M macro/landscape button, ii multi-up view, 10 O on/off, setting auto, 23, 25 orientation setting, 1, 23 P PictBridge enabled printer, 14 pictures copying connected, 17 copying from EasyShare software, 19 deleting, 20 location, changing, 8 selecting more than one, 20 viewing, 8 play/pause, video, 13 portrait, set orientation, 23 power specifications, 33 turning on, 6 printer connection mode,
Index T thumb drive. See flash drive., 5 thumbnails, 10 time, setting, 23 transitions, slides, setting, 23 troubleshooting error messages, 31 frame, 29 turning on/off frame, 6 U upgrading firmware, 22 software and firmware, 35 USB connection mode, 15 USB device, connecting, 5 V viewing full screen picture, 10 pictures/videos, 8 thumbnails, 10 W warranty, 36 www.kodak.
