Front View 1 1 LCD screen 2 Touch border (Tap/Slide) 3 Touch border (Tap only) 4 Touch-sensitive raised guide 3 4 2 NOTE: When screen icons appear, LED lights turn on at touch-sensitive points along the raised guide. To use the touch border, see page 7. Back/Right View 1 2 1 Audio In 2 Audio Out 3 DC-In (12V) 3 www.kodak.com/go/digitalframesupport 1 ENGLISH See the extended user guide – for more information about using your frame, visit www.kodak.com/go/digitalframesupport.
Back/Side View 1 4 5 2 6 9 7 3 8 9 1 On/Off button 6 Memory card slot - CF, MD 2 Wall mounting holes (see page 8) 7 USB connector (to camera/USB device) 3 Rotating/extending stand 8 USB connector (to computer) 4 Memory card slot - SD, MMC, MS, xD 9 Speakers 5 Volume button 2 www.kodak.
1 Getting started Setting up your picture frame Changing the frame orientation Your frame is set up to display pictures in landscape orientation . You can turn the stand to change it to portrait but you must also change the setting (see page 8). Change the stand position: ■ Turn the stand 90° to change the orientation. ■ Pull the stand out to adjust the frame angle. www.kodak.
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. Turning on your frame On/Off button 4 www.kodak.
Getting started Setting your language The language screen appears the first time you turn on your frame. Using the touch border (see page 7): ■ Slide to find your language, then tap OK. To change the language at a later time: ■ Tap (Home) → (Settings) → Language. The language screen appears. Slide to find your language, then tap OK. Enjoying your pictures immediately! ■ To view your pictures or play a slide show, insert a memory card, or connect a camera or other USB device (see page 6).
Getting started Inserting a memory card To insert a card, push the card firmly into the slot until it stops. Secure Digital MultiMedia Card Memory Stick xD To remove a card from: top card slot - push in the card to release it. side card slot - pull out the card CompactFlash MicroDrive CAUTION: Do not insert a micro or mini memory card without an adapter.
Getting started Using your frame’s touch border Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to find/highlight menu items or pictures/videos. Press OK to select them. NOTE: The screen is not touch-sensitive. Do not touch. CAUTION: Only use your finger to touch the border. Using sharp or metal objects may damage the border or screen. On the raised guide: - Home ■ Tap at bottom or right to - Slide show find/highlight menu items, pictures, videos, etc.
Getting started Mounting your frame on the wall Use wall-anchoring hardware (not included) to anchor your frame securely to your wall. Wall mounting holes Clip (use to reroute, secure, and center the power cable) Power cable To change to portrait , turn your frame 90° and use the wall mounting holes at the top. Changing the frame orientation setting Change the frame orientation setting if you change to portrait 1 Tap (Home) → orientation. (Settings). 2 Select (Viewing options), then tap OK.
2 Doing more with your frame Accessing your pictures Tap Home to access pictures/videos from all connected devices (see page 6). Use the touch border to make your selections (see page 7). 1 Tap (Home), then (Pictures and Videos). All connected sources and the Settings icon are displayed. 2 Slide to highlight a picture source, then: ■ Tap (Slide show) to start a slide show. OR ■ Tap OK to view thumbnails. Picture source icons: My Frame—the frame’s 128 Mb internal memory.
Doing more with your frame Settings—customize your frame settings. For example; set slide show durations and transitions, set viewing options, screen brightness, clock, and timer. See the extended user guide at www.kodak.com/go/digitalframesupport. My Slide show—appears when you save a slide show you are viewing as your favorite (see page 12). Viewing your pictures Playing a slide show There are three ways to start a slide show on your frame: ■ Insert a memory card or USB device, then turn on the frame.
Doing more with your frame Viewing thumbnails There are two ways to view your pictures as thumbnails: ■ Tap (Home). Tap (Pictures and Videos), select a picture source (see page 9), then tap OK. OR ■ From a slide show or single view, tap then (Menu), (Multi-up). NOTE: If the screen icons are unavailable, tap the touch border. To navigate through the thumbnails, slide your finger left/right along the bottom touch border.
Doing more with your frame Viewing pictures by date or filename By default, the pictures and videos on your frame are arranged and played by date, starting with the oldest. You can play the arrangement or order, by date, or alphabetically by filename. To change the sort order: 1 Select a picture source (for example, a folder with pictures), or multiple pictures (see page 17). 2 Tap (Menu). 3 Highlight Sort, then tap OK.
Doing more with your frame Playing music only 1 Tap the touch border to pause your slide show and to display the screen icons. 2 Tap (Home), then sources. (Music) to view music 3 Slide to the right/left to move up/down the music source list, then tap OK. 4 Slide right/left to go to the previous/next song, or select Play all songs, then tap OK. Your music starts playing. 5 Tap (Slide show) to return to your picture or slide show.
Doing more with your frame Playing a video ■ During a slide show, videos play automatically. When the video ends, the slide show resumes. To play a video from thumbnails view, highlight a video thumbnail, then tap OK. ■ Videos in thumbnail view: – MOV videos are indicated with . – AVI, MPEG, and MPG videos display the first frame. ■ Video control buttons: play, pause, and resume the video. rewind / fast forward. or 14 stop the video and return to thumbnails. www.kodak.
Doing more with your frame Copying pictures Copy pictures/videos from your current viewing location to other connected devices (see page 5). CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Highlight a picture to copy: In thumbnails view, slide your finger along the bottom touch border to find a picture; or, display a picture in single view. 2 Tap (Menu). 3 Tap (Copy), then OK. 4 Tap the destination you want to copy to, then tap OK.
Doing more with your frame Deleting pictures CAUTION: Removing a card or disconnecting a device while deleting may damage your card, pictures, or device. 1 Highlight a picture to delete: In thumbnails view, slide your finger along the bottom touch border to find a picture; or, display a picture in single view. 2 Tap (Menu). 3 Tap (Delete), then tap OK. 4 Tap Yes to confirm. The picture is deleted. 5 Tap (Close) to close the menu. To delete multiple pictures, see page 17. 16 www.kodak.
Doing more with your frame Selecting multiple pictures Use the multi-select feature to copy or delete two or more pictures; or to play a slide show of selected pictures. 1 In thumbnails view, slide along the bottom touch border to find a picture, then tap to select it. A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, tap again.
Doing more with your frame Printing pictures 1 Make sure your frame is disconnected from the printer (Pictbridge enabled). 2 On the frame, change your connection mode to Printer by tapping (Home) → (Settings) → Device configuration → USB connection mode. 3 Turn off the frame and printer. 4 Connect the USB cable from the frame to the printer. 5 Turn on the frame and printer. 6 In slide show or single view, tap (Menu), then (Print). In thumbnails view, see page 17 to print multiple pictures.
Doing more with your frame Copying from your computer Use the Kodak EasyShare digital display software to drag and drop pictures easily from your computer to a memory card (or other removable USB device). Insert the card into your frame and play a slide show right away (see page 5). Installing the software CD packaged with your frame. 1 Insert the CD into your computer and follow the on-screen instructions to install the software.
Doing more with your frame ■ to and from a USB-connected device ■ into a multimedia presentation that you can save to your frame Organize—quickly create, rename, and delete files/folders on your frame For more information on the features included in the EasyShare digital display software, click the Help button. Customizing your frame For a custom look, remove the adhesive matte (included) from its liner, align it carefully, then attach it to your frame.
Doing more with your frame Learning more about your frame www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates and custom mattes www.kodak.com/go/digitalframesupport Extended user guide Interactive troubleshooting and repairs Interactive tutorials FAQs Downloads Product registration www.kodak.
3 Solving frame problems For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 4). ■ Make sure the power switch on the frame is On. Nothing happens when ■ Insert a certified CF/SD/MMC/MS/xD card with images into the designated card slot, then push to seat it (see page 6).
4 Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix ■ For digital frame disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or visit www.kodak.com/go/digitalframesupport. Limited warranty Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt.
Appendix for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.
Appendix product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules.
Appendix MPEG-4 Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use by a consumer engaging in personal and non-commercial activities. China RoHS www.kodak.
Appendix Russian GOST-R Eastman Kodak Company Rochester, New York 14650 Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, dig