Front View 1 LCD screen 2 Touch border (tap/slide) 3 Touch border (tap only) 4 Touch-sensitive raised guide To use the touch border, see page 6. 1 3 4 2 Back/Side View 1 5 6 2 3 4 7 8 9 1 On/Off button 5 Reset button 2 Stand attachment slot 6 USB connector (to camera/USB device) 3 Frame stand (see page 2) 7 Memory card slot - SD/SDHC 4 Memory card slot - SD, MS, xD, MMC 8 Wall mounting holes (see page 8) www.kodak.
1 Getting started Setting up your picture frame Attaching the frame stand Your frame displays pictures in landscape . To change to portrait , see page 7. Tab Slot Make sure the tab is secure in the slot. Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 2 www.kodak.
Getting started Turning on your frame On/Off button Setting your language The language screen appears the first time you turn on your frame. Using the touch borders (see page 6): ■ Slide to find your language, then tap OK. To change the language at a later time: ■ Tap (Home) → (Settings), then slide to highlight Language. The language screen appears. Slide to highlight your language, then tap OK. www.kodak.
Getting started Enjoying your pictures immediately! ■ To view your pictures or play a slide show, insert a memory card, or connect a camera or other USB device (see page 5). If you are at the Home screen, see page 10 to start your slide show. To change the slide show order, see page 12. 4 www.kodak.
Getting started Inserting a memory card To insert a card, push the card firmly into the slot until it stops. To remove a card from: top card slot - push in the card to release it. side card slot - pull out the card CAUTION: Do not insert a micro or mini memory card without an adapter. MultiMedia Card SD/SDHC Memory Stick xD SD/SDHC Connecting a digital camera or other USB device USB cable included with your USB device USB devices: camera, flash drive, card reader, etc. (sold separately) www.kodak.
Getting started Using your frame’s touch border Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to find/highlight menu items or pictures. Press OK to select them. NOTE: The screen is not touch-sensitive. Do not touch. CAUTION: Only use your finger to touch the borders. Using sharp or metal objects may damage the border or screen.
Getting started Turning off your frame ■ Standby mode—Press the power button on the frame. ■ Power off—Unplug the power cable. Changing your frame orientation Your frame is set up to display pictures in landscape orientation. You can turn the stand to change it to portrait but you must also change the setting. Change the stand position: 1 Remove the stand, turn it 90 °, and replace as shown (see page 2). Change the setting: 1 Tap (Home) → (Settings).
Getting started Mounting your frame on the wall Use wall-anchoring hardware (not included) to anchor your frame securely to your wall. Clip (use to reroute and secure power cable) Power cable Wall mounting holes To change to portrait , turn your frame 90° and use the wall mounting holes at the top. 8 www.kodak.
2 Doing more with your frame Accessing your pictures Tap Home to access pictures from your memory card and all connected devices (see page 5). Use the touch borders to make your selections (see page 6). 1 Tap (Home). All connected sources and the Settings icon are displayed. 2 Slide to highlight a picture source, then: ■ Tap (Slide show) to start a slide show. OR ■ Tap OK to view thumbnails. Picture source icons: Memory card—appears when you insert a card (page 5).
Doing more with your frame Viewing your pictures Playing a slide show There are three ways to start a slide show on your frame: ■ Insert a memory card or USB device, then turn on the frame. ■ Turn on the frame, then insert a card or connect a USB device—a new slide show starts automatically, replacing a currently running slide show or single view picture. HIghlight a picture in thumbnails view or highlight a picture source on the Home screen, then tap (Slide show).
Doing more with your frame Viewing thumbnails There are two ways to view your pictures as thumbnails: ■ Tap (Home). Slide to highlight a picture source (see page 9), then tap OK. OR From a slide show or single view, tap (Multi-up). NOTE: If the screen icons are unavailable, tap the touch border. ■ To navigate through the thumbnails, slide your finger left/right along the bottom touch border. Touch and hold until the screen changes (about 3 seconds) to move even faster through the thumbnails.
Doing more with your frame Viewing pictures by date or filename By default, the pictures on your frame are arranged and played by date, starting with the oldest. You can change the arrangement or order, by date, or alphabetically by filename. To change the sort order: 1 Highlight a picture source (for example, a folder with pictures), or multiple pictures (see page 15). 2 Tap (Viewing Options). 3 Highlight Sort, then tap OK.
Doing more with your frame Copying pictures Copy pictures from your current viewing location to other connected devices (see page 5). CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Highlight a picture to copy: In thumbnails view, slide your finger along the slider area to find a picture; or, display a picture in single view. 2 Tap (Menu). 3 Tap (Copy). 4 Tap the destination you want to copy to, then tap OK. The picture is copied.
Doing more with your frame Deleting pictures CAUTION: Removing a card or disconnecting a device while deleting may damage your card, pictures, or device. 1 Highlight a picture to delete: In thumbnails view, slide your finger along the slider area to find a picture; or, display a picture in single view. 2 Tap (Menu). 3 Tap (Delete). 4 Tap Yes to confirm. The picture is deleted. 5 Tap (Close) to close the menu. To delete multiple pictures, see page 15. 14 www.kodak.
Doing more with your frame Selecting multiple pictures Use the multi-select feature to copy or delete two or more pictures; or to play a slide show of selected pictures. 1 In thumbnails view, touch and slide to find a picture, then tap A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, tap to select it. again. Selecting/Unselecting all Select all ■ Tap Select All from thumbnails view (or your current location).
Doing more with your frame Copying from your computer Use the Kodak EasyShare digital display software to drag and drop pictures easily from your computer to a memory card (or other removable USB device). Insert the card into your frame and play a slide show right away (see page 5). Installing the Kodak EasyShare digital display software CD packaged with your frame. 1 Insert the CD into your computer and follow the on-screen instructions to install the software.
Doing more with your frame 4 In the Viewer pane, select the pictures, then drag and drop them to the card or USB device in the Shortcut pane. 5 Remove the card from your computer and insert it into your frame card slot or a connected card reader. A slide show begins. NOTE: To maintain the slide show order during playback, see page 12 and select Filename, A - Z. For more information on the features included in the EasyShare digital display software, click the Help button.
Doing more with your frame Maintaining your frame and mattes IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame, LCD, or matte with a clean, dry cloth (included). For fingerprints on the frame, apply light pressure. Resetting factory defaults Reset button slot 1 Make sure the power cable is connected and the frame is turned on.
Doing more with your frame Learning more about your frame www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates and custom mattes www.kodak.com/go/digitalframesupport Extended user guide Interactive troubleshooting and repairs Interactive tutorials FAQs Downloads Product registration www.kodak.
3 Solving frame problems For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 2). ■ Unplug the power cable from the frame. Wait 5 seconds, then reconnect the cable. ■ Press and hold the power button for 1 second.
4 Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix ■ For digital frame disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or visit www.kodak.com/go/digitalframesupport. Limited warranty Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt.
Appendix for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed.
Appendix product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules.
Appendix China RoHS www.kodak.
Appendix Russian GOST-R Eastman Kodak Company Rochester, New York 14650 Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, dig
