KODAK EASYSHARE Digital Frame Extended user guide P85 www.kodak.com For help with your digital frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2010 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company.
Product features Top—buttons and controls Play speed/transition Slow with Wipe Medium with Pan/Zoom Fast with Fade www.kodak.
Product features Side—power and connectors Power Auto shut off 8/16/24 hours Memory card slot SD/SDHC/MMC/MS /MS Pro /XD USB connector DC-in* Stand* * See Attaching the power cable, page 1 and Attaching/removing the stand, page 2. ii www.kodak.
Table of contents 1 1 Getting started ......................................................................................1 Attaching the power cable ............................................................................ 1 Attaching/removing the stand ....................................................................... 2 Turning your frame on and off ....................................................................... 2 Setting your language ..................................................
1 Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing your pictures couldn’t be simpler! Attaching the power cable The frame automatically turns on when you plug it in for the first time. CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet.
Getting started Attaching/removing the stand Attach Fit the tabs on the back of the stand into the slots on the frame and slide up to lock. Remove Slide the stand down to unlock the tabs and remove. Turning your frame on and off Power button - press and hold (for about 2 seconds), then release. www.kodak.
Getting started Setting your language The language screen appears the first time you turn on your frame. Press to highlight your language, then press OK. To change the language on your frame at a later time: 1 Press the Power and Previous buttons at the same time to pause a slideshow and display the language screen. 2 Press 3 to highlight your language, then press OK. www.kodak.
Getting started Inserting a memory card To insert a card, push it firmly into the slot until it clicks and stops. To remove a card, pull it out of the slot. SD/SDHC (SECURE DIGITAL/SECURE DIGITAL High Capacity) MMC (MULTIMEDIA Card) MS (MEMORY STICK) MS/MS Pro Duo (MEMORY STICK) XD NOTE: Your frame contains pre-loaded sample pictures, which play only when no memory card or USB device is inserted. Sample pictures may not be deleted.
2 Viewing pictures Pictures play from a memory card or USB device when one is inserted in the frame. NOTE: Your frame contains pre-loaded sample pictures, which play only when no memory card or USB device is inserted. Sample pictures may not be deleted. Viewing pictures from a card or USB device 1 Turn on the frame. 2 Insert a memory card, USB flash drive, or other USB device (see page 4). Your pictures start playing automatically. 5 www.kodak.
Viewing pictures Navigating through your pictures Press the arrow buttons to navigate through your pictures. Previous picture Next picture Play/Pause Navigation and play buttons To move more quickly through your pictures, press and hold an arrow button. Previous picture—Go to the previous picture. Play/Pause—Start or pause play. Next picture—Go to the next picture. www.kodak.
Viewing pictures Changing play speed, transitions, and order Move the sliders to change the setting. Play speed/transition Play order Play speed and transition Change how long each picture stays on the screen and the type of transition between pictures. Slow—pictures change every 60 seconds, with wipe transition. Medium (default)—pictures change every 10 seconds, with pan and zoom transition. Fast—pictures change every 5 seconds, with fade transition.
Viewing pictures Energy saver setting—automatic shut off The automatic shut off time is set at the factory to 8 hours (default). Press the power button to turn the frame off or on at any time. ■ 8 hours (or 16, depending on the setting) after you turn the frame on, the frame starts a 10-minute shut off timer. The screen dims to indicate a 5-minute warning, then turns itself off. ■ If you press any button within the 10-minute timer, the frame resets the timer for another 10 minutes.
3 Troubleshooting and support For step-by-step product support, go to www.kodak.com/go/digitalframesupport, select your frame model, and select Step-by-Step Solutions & Repair. Learning more about your frame www.kodak.com/go/digitalframes Learn more about your frame www.kodak.com/go/digitalframesupport Frequently asked questions Downloads Product registration www.kodak.com/go/stepbystep Step-by-Step Solutions & Repair Picture frame problems If...
Troubleshooting and support If... Try one or more of the following Nothing happens when ■ Insert a certified SD/SDHC/MMC/MS/MS Pro/XD Card, with images, into the card slot, then push to seat it (see page 4). a memory card or USB device is connected. ■ Make sure the USB device is connected securely (see page 4). ■ Make sure the file format of your pictures is supported. (See page 14).
Troubleshooting and support Identifying error messages Error icon and meaning Try one or more of the following Card/device empty ■ Insert a different card or device with pictures (see Card/device unreadable or corrupt page 4). File bad ■ See page 14 for supported file formats. Unknown error. ■ Turn off the frame, then turn it back on. If the problem persists, contact customer support help at www.kodak.com/go/digitalframesupport. 11 www.kodak.
Troubleshooting and support Upgrading your firmware (recommended) Firmware is the software that runs on your frame. Download and install the latest version from the Web to keep your frame up to date. Check your frame’s current firmware version Next Power 1 Turn your frame on. Press the Power and the Next buttons at the same time and hold for 5 seconds. 2 Note the firmware version listed on the About screen. Download the latest firmware 1 On your computer, go to www.kodak.com/go/digitalframedownloads.
Troubleshooting and support Maintaining your frame IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. 13 www.kodak.
4 Appendix Digital frame specifications For more specifications, go to www.kodak.com/go/digitalframesupport. KODAK EASYSHARE P85 Digital Frame Color display 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.2 x 12.2 cm (6.4 x 4.8 in.) active area Internal storage capacity No internal memory Power supply Manufacturer, Model #: Malata MPA-05015, EIAJ class 2 DC plug Input: 100-240V AC 50/60 Hz. Output: 5V DC 1.5 Amp Communication with USB devices USB 2.
Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. KODAK AC Adapters and Battery Chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix Limited warranty Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair. Limited warranty coverage Warranty service is only available from within the country where the Products were originally purchased.
Appendix disclaims the implied warranties of merchantability and fitness for a particular purpose. In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation.
Appendix Regulatory compliance and advisory FCC compliance and advisory This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix CE Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Appendix VCCI Class B ITE Korean Class B ITE China RoHS www.kodak.
Appendix ENERGY STAR Product ENERGY STAR® qualified product. 21 www.kodak.
1 Index A AC adapter connecting, 1 safety information, 15 specifications, 14 appendix, 14 arrow buttons, 6 auto shut-off, 8 B buttons/controls, i by date play order, 7 C cable, power, connecting, 1 card, memory inserting, 4 slot, ii supported types, 14 viewing pictures from, 5 cleaning frame, 13, 15 connectors/controls, ii D disposal, recycling, 15 download firmware, 12 duration, changing, 7 E energy saver, 8 energy star product, 21 error icons, 11 www.kodak.
Index M memory card.