Printer User's Guide
Table Of Contents
- Kodak EasyShare printer dock series 3 user's guide
- Product features
- Table of contents
- 1 Getting started
- 2 Setting up your digital camera
- 3 Printing without a computer
- 4 Installing software
- 5 Using the printer dock with a computer
- 6 Care and maintenance
- 7 Troubleshooting
- 8 Getting help
- 9 Appendix
- Index
Troubleshooting
www.kodak.com/go/support
45
Picture Size lights
Light status Cause Action/solution
One light glows steady
green
The indicated picture size is
available and selected.
None required.
To change picture size, press
the Picture Size button
repeatedly.
All lights are off There are no pictures in the camera,
on the card, or on the PictBridge
compatible device.
To enable the picture size
option:
1 Take pictures.
2 Dock the camera or
connect a compatible
Kodak card reader
(page 14) or PictBridge
compatible device
(page 13). If using a card
reader, make sure a
memory card is inserted.
The camera is not docked, a
compatible Kodak card reader or
PictBridge compatible device is not
connected, or a memory card is not
inserted.
The camera is not properly seated
on the connector.
Reseat the camera on the
printer dock (page 10).
The camera or card reader is
transferring pictures to the
computer, or has established an
active connection to the computer.
None required.