Printer User's Guide
Table Of Contents
- Kodak EasyShare printer dock series 3 user's guide
- Product features
- Table of contents
- 1 Getting started
- 2 Setting up your digital camera
- 3 Printing without a computer
- 4 Installing software
- 5 Using the printer dock with a computer
- 6 Care and maintenance
- 7 Troubleshooting
- 8 Getting help
- 9 Appendix
- Index
2 www.kodak.com/go/support
Getting started
Installing the custom camera insert
IMPORTANT:
Use the custom insert that came with your digital camera to dock the
camera, otherwise the camera may not fit on the printer dock.
■ Locate and install the custom insert included with
your camera.
IMPORTANT:
Depending on your camera connector, you
may also need to use the Kodak dock
adapter D-26. See the instructions included
with the dock adapter.
a Remove any packing material covering the
connector.
b Place the rear tabs of the insert in the slots
toward the back of the printer dock.
c Press the front of the insert down and snap into
place.
Purchase a custom camera insert for your Kodak EasyShare digital camera and other
accessories at www.kodak.com/go/accessories.