User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: 1411 W. 190th Street, Suite 550, Gardena, CA 90248, U.S.A. Company website: www.kodakcamera.jkiltd.com For Customers in the U.S.A. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
SAFETY NOTES Safety notes for this camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble the camera. To prevent the camera from being damaged by moisture, do not use or store the camera in very humid environments, such as in rain or near bodies of water. Do not use or store the camera in dusty places or on a beach to prevent dust or sand from entering the camera, causing possible damage to it.
If battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention. When the camera is stored for a long period of time, remove the battery and keep it in a dry place that is not accessible to the infants and children. Disposal of used batteries should be carried out in accordance with the local (national or regional) regulations. In a colder environment, the performance of the battery could be noticeably reduced.
Do not directly edit the data on the memory card. Copy the data to your PC before you edit them. When the camera is stored for a long period of time, be sure to download your photos and remove the memory card. Store it in a dry environment. Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Format the memory card using the camera before you use it or insert a new one.
CONTENTS BEFORE YOU START.......................1 SAFETY NOTES...............................2 MODE OVERVIEW...........................19 Display Setting................................................... 19 LCD Screen Display........................................... 20 CONTENTS.......................................5 Overview of the screen icons in photo shooting mode............................... 20 GETTING READY.............................9 Overview of the Screen Icons in Movie Mode.............
BASIC OPERATION..........................33 USING THE MENUS.........................45 Using the Zoom Function................................... 33 Photo Setup Menu............................................. 45 Macro Mode....................................................... 34 Expo Metering (Exposure Metering)............ 45 Self-Timer Setting.............................................. 35 Image Size................................................... 46 Flash Mode.............................
Expo Metering (Exposure Metering)............ 54 Power Saver................................................ 66 Video Quality............................................... 55 Language..................................................... 66 OIS............................................................... 55 Sound Settings............................................ 66 Color Effect.................................................. 56 Zone.............................................................
Connecting to a PictBridge Compatible Printer.. 73 Setting the USB Mode................................. 73 Connecting to your Printer........................... 74 Using the PictBridge Menu................................. 75 Print (with Date)........................................... 75 Print (without Date)...................................... 76 Print Index.................................................... 77 Print DPOF Images...................................... 78 Exit.............................
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.
Part Names 1 2 3 4 5 6 7 8 13 12 9 10 11 10
14 15 16 17 18 19 20 21 22 23 11
12 1 Flash Lamp 9 Display Button/ Arrow Button (Up) 17 Status Indicator 2 AF Assist Beam/Timer Indicator 10 Flash Button/ Arrow Button (Right) 18 Zoom lever 3 Microphone 11 Delete Button/ Arrow Button (Down) 19 Shutter Button 4 Lens 12 Macro Button/Self-Timer Button/Arrow Button (Left) 20 Fast Video Recording Button 5 LCD Screen 13 SET Button 21 Battery Cover 6 Mode Selection Button 14 Wrist Strap Buckles 22 Tripod Receptacle 7 Menu Button 15 USB Port 23 Speaker 8
Installing Battery and Memory Card 1. Open the battery cover. 2.
3. Insert the memory card into the memory card slot as shown in the diagram below: Write protection buckle The memory card (SD/SDHC) is optional and not included in all camera packaging. If you have to purchase a memory card, select one with storage capacity between 4GB and 32GB to ensure correct data storage. To remove your memory card, open the battery cover, gently press the memory card to eject it and remove it carefully. 14 4. Close the battery cover.
Charging Battery Before charging the battery, ensure that the battery is inserted properly and the camera is off. 1. Connect the camera and the power charger using the supplied USB cable. (The plug shape of the power charger may vary depending on the country or region. The actual item may vary from the drawing below). 3. When the camera is turned off, you can also connect the camera to your PC using a USB cable to charge the battery. 2.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button Symbol Description In the instructions below, the following symbols may be used throughout this manual on how to operate the camera. This is to facilitate better understanding. [Button name]: When one button on the camera cannot be indicated by an icon, the symbol [ ] is used to indicate it.
Set your Language, Date/Time Set your Language, Date/Time after the first power-on 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the arrow buttons to select your desired language. button to confirm the 3. After you press the selection, the Date/Time settings screen appears. 4. Press the left/right arrow button to select the Date/ Time to be adjusted: Time is displayed in yyyy:MM: dd HH:mm. 5.
6. Press the up/down arrow button to press the value for your selected block. After you finish your settings, press the button to confirm. 7. Press the button and the following snapshot screen appears. Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the Power button to turn the camera on. 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. , and 3.
MODE OVERVIEW Display Setting Press the Full, Off. button to display the settings: Classic, Off: Does not display any additional icons on screen Classic: Displays the camera parameters on screen SD 1234 16M 00:56:00 -0.3 EV 400 ISO Full: Camera parameters with Grid and Histogram SD 1234 16M 00:56:00 -0.
LCD Screen Display Overview of the screen icons in photo shooting mode Manual Mode Panorama Mode Auto Mode Scene Mode SD x3.2 1 Shooting Mode Icons Portrait 1234 16M 00:56:00 15 sec -0.
14 Shutter Speed (Adjustable only in 15 Histogram 16 Focus Frame 17 Expo Metering AiAE Spot Center 18 AF Mode Single-AF Multi-AF 19 Self-Timer Self-timer Off Mode) Force Flash Slow Sync. Slow Sync.
Overview of the Screen Icons in Movie Mode 7 Color Effect 8 Video Quality 9 Remaining Recording time 10 Exposure Compensation (EV value) SD x3.2 11 Image Stabilization 13 Eye-Fi ON (with signal) 14 Expo Metering 00:56:00 -0.
Overview of the Screen Icons in Playback Mode 1 2 1 DPOF File 2 File Protection 3 Memory space (indicating the current number of photos and total number of photos) 3 1/45 SD 4 5 12 11 4 SD Memory Card/Built-in Memory 5 Battery Status 6 Zoom Magnification Area 7 Image Zoom Ratios 10 6 x2 2013 01 - 01 00 : 00 9 7 8 8 Image Zone 9 Shooting Date 10 Eye-Fi ON (with signal) 11 HDR 12 Red-Eye Reduction 23
Using the Mode Button This camera provides a convenient Mode Button that allows you to switch easily between different modes. After pressing the mode button to enter the mode selection menu, press the Left/Right button to choose the selected mode. Press the button to confirm your selection. All the available modes are listed below: Mode Name 24 Icon Description Manual Mode Many of the camera settings can be configured manually in this mode.
Manual Mode When selecting manual ( ) mode, you can set the aperture / shutter speed manually and ISO value. 1. Press the mode button to select Manual Exposure Mode , press button to confirm. Auto Mode Auto Mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to adjust your photos and videos for the best possible results. Follow these steps: 1. Press the button to select Auto Mode ( ). 2.
Portrait Mode Panorama Mode Panorama Mode allows you to create a panoramic picture. The camera will automatically compose a panoramic picture using the individual shots that you take. In Portrait Mode, the camera is set to automatically adjust exposure for realistic capture of skin tones. Follow these easy steps to create a panoramic picture: 1. Press button to select Panorama Mode ( ). 2. Press the arrow buttons to select a shooting direction.
After selecting Panorama Mode, Flash, Selftimer, Macro Mode and Exposure Compensation cannot be adjusted. Pictures cannot be deleted, nor the zoom adjusted until the series is finalized. 5. If continuous pictures are less than 4 shots, press button, the camera will splice the pictures automatically. Press playback button to enter playback mode to see the effect. In Panorama Mode, up to 4 photos can be captured when the image size is set at 2MP. 6.
Scene Mode (SCN) You can select an appropriate mode from the 20 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically. Press the button to enter Scene Mode. The LCD will display a menu like the example below: Press the arrow buttons to select a scene , and press the button to confirm.
Scene Auto Scene Description Identifies the scene automatically; Person, Backlighting, Landscape, Macro, Night Scene, Night Scene Person, Auto. Landscape For landscapes and outdoor shots. Vivid reproduction of green and blue. Sport For fast-moving subjects. Capture sharp, action shots with minimal blur. This mode is not recommended for shooting indoors. Beach For taking pictures in areas with strong sunlight. Sunset For sunsets. Capture subjects in strong sunlight.
Scene Panning Shot 30 Description Suitable for capturing fast moving objects to have a clear subject with a blurred background. Sketch For taking photos with pencil sketch effect. Fish Eye For interesting fish eye effect. Party Suitable for taking indoor party pictures, even under the complicated lighting conditions. Indoor For indoor settings. Reduce blur and improve color accuracy. Leaf For plants. Capture brilliant shots of greenery and blossoms. Museum For museums or flash-free areas.
Auto Scene Mode (ASCN) In “ASCN” scene mode, the camera can detect different environments intelligently and automatically select the best scene and photo settings for you. “ASCN” can intelligently detect the following scenes: Icon Mode Name Landscape Mode Icon Mode Name Night Landscape Mode Portrait Mode Macro Mode Night Portrait Auto Mode Backlit Portrait To use "ASCN": 2. Hold the camera steadily and aim at the subject. The optimum scene mode will be selected automatically. 3.
Mode Name Landscape Mode 32 Description For landscapes, ASCN will automatically adjust the exposure and reproduce vivid green and blue colors. Portrait Mode Most suitable for capturing people with focus on their faces. Night Portrait When you take portraits at night, or in low light conditions, ASCN will automatically adjust the exposure for people and night scenes.
BASIC OPERATION Using the Zoom Function Your camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Toggle the Zoom lever of the camera to zoom in or out of the subject while taking pictures. Zoom Indicator When the Optical Zoom reaches the threshold as Digital Zoom, release and turn the zoom lever to T to switch between the Optical zoom and Digital zoom.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( Marco Menu. ) to enter the • Macro Off Select this option to disable Macro. • Macro On Select this to focus on subjects 3cm from the lens. button to confirm the settings and 3. Press the exit the menu. 2.
Self-Timer Setting Use this function to take pictures at pre-set intervals. First choose 2 seconds, 10 seconds,or by smile detection. and then take the pictures. 1. Press the left arrow button ( self-timer menu. • Self-Timer - 10 sec A single picture is shot 10 seconds after the Shutter Button is pressed. • Self-Timer - Smile Press the Shutter Button and a picture will be taken immediately after a smile is detected. ) to enter the button to confirm the settings and 3. Press the exit the menu. 2.
Flash Mode The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows. 1. Press the right arrow button ( Flash Settings Menu. Slow Sync. This allows for night scenery photos that include people in the foreground. The use of a tripod is recommended when shooting with this setting. • Slow Sync. + Red-Eye Use this mode for slow synchro shots with red-eye reduction.
EV Setting The EV function menu of the camera includes functions, such as EV, shutter adjustment, ISO. Using the appropriate function settings can improve your pictures. To select the best setting for optimum photos, follow these steps: 1. Press the Exposure Compensation Set up to adjust the picture brightness. In the case of a very high contrast between the photographed object and the background, the brightness of the picture can be appropriately adjusted.
ISO Shutter Adjustment The ISO function allows you to set the sensitivity of the camera's light sensor based on the brightness of the scene. To improve the camera's sensor performance in darker environments, a higher ISO value is required. A lower ISO value is needed when shooting in brighter conditions. You can adjust the shutter speed value. Selecting a higher shutter speed will capture fast moving objects more clearly. Selecting a slower shutter speed will result in some motion blur of moving objects.
Using Quick Recording In shooting mode, press the Recording shortcut button to begin recording video. After finishing, press the Recording short cut button or the Shutter Button to stop and store the video. The camera will return to shooting mode automatically.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD screen: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD screen. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or on the SD memory card. button to enter the Movie Playback Mode. 3. To play a selected video clip, press the During video playback, the operating instructions will appear on the screen.
Thumbnail View When in Playback Mode, rotate the Zoom lever counter clockwise to the position to display thumbnail images of the photos and videos on the screen. W Zoom T Zoom In 3. Press the arrow buttons to select a picture or video clip to view and press the button to restore it to the original size. If the indicator appears on the LCD, then a movie file is currently being displayed. 1. Slide the zoom lever to switch between 3x3 and 4x4 thumbnails.
Using Zoom Playback (for still pictures only) The Zoom lever can also be used during playback. This allows you to magnify photos between x2 to x8. 5. Press the arrow buttons to navigate and select a part of the image to be zoomed in. 1. Press the 6. Press the nal scale. button to switch to Playback Mode. 2. Press the left/right button to select a picture to be zoomed in. 3. Rotate the Zoom lever clockwise to ( zoom in. ) to 4.
Slideshow This setting allows you to view all the stored images as a slideshow. 1. Press 2. Press button to enter playback screen. button to enter slide option. 3. Press the left/right button to select slideshow playing or 「Cancel」 to return to the playback screen. 4. Press the button to confirm the setting.
Photos and Video Deletion In playback mode, press the down arrow button ( ) to delete your photos and videos. To delete photos or videos: 1. Press the button to switch to playback mode. 2. Press the left/right arrow button to select the photos and videos to be deleted. 3. Press the down arrow button ( deletion screen is displayed. 44 ) and the 4. Press the up/down arrow button to select 「Delete One」or「Exit」and press the to confirm. button Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Expo Metering (Exposure Metering) Mode: 1. In Photo Shooting Mode, press the enter the Photo Shooting Menu. button to Use this setting to select the "target" size of the camera's field of view to be metered. 2. Press the up/down arrow button to select the Photo Shooting Menu to be set. 3. Press the left/right arrow button to select the Photo Shooting Menu to be set and press the button to confirm.
Image Size OIS The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality. This mode can help reduce photo blur caused by unintentional hand shake, low light or slow shutter speed. The bigger the number of recorded pixels is, the better the image quality becomes. As the number of recorded pixels lessen, you will be able to record more images on a memory card.
Cont. AF Continuous Shot Enable the continuous AF to be able to continuously focus automatically when taking pictures. Use this setting to perform continuous shooting. After entering this mode, you can shoot multiple images by continuously holding the shutter button down.
• Time-Lapse 30sec • Time-Lapse 1min • Time-Lapse 5min • Time-Lapse 10min Focus Setting This setting allows you to select different modes for optimum focus. The flash is disabled in this mode in order to achieve quick succession of shots. Press the Shutter button to start continuous shooting. 48 There are 2 options: • Single-AF: The focus frame appears on the center of the LCD screen to focus on the subject.
White Balance Setting Color Effect The White Balance Setting allows you to adjust the color temperature for different lighting sources to ensure the most accurate color reproduction. The Image Color Setting allows you to select different color effects. 1. Press the ting Menu. button to select the Image Color Set- 2. Press the left/right arrow button to select the Image Color Setting options.
• Shooting menu in the shooting mode (O: Optional X: Not optional) Shooting Modes Options 50 о о о о х о о о о о х о о о х о х х о о о х х х о о о х х х о о х х х х о х х х х х о х х о х х х х х х х о
Photo Shooting Setting Menu Quality Mode: button in Photo Shooting Mode and 1. Press the press the up/down button to select . The Quality Setting can be used to adjust the image compression ratio. There are three options for picture quality: 2. Press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. • Best (16M Average File Size: 4.0MB) • Fine (16M Average File Size: 2.5MB) • Normal (16M Average File Size: 2.0MB) 4.
52 AF-Assist Beam Digital Zoom In a darker environment, AF Assist Beam can be turned on for better focus. Turn on or off the digital zoom.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time.
Movie Menu Expo Metering (Exposure Metering) Mode: 1. Press the press the button, select the mode and button to enter the Movie Menu. Use this setting to select the "target" size of the camera's field of view to be metered. There are 3 options: 2. Press the up/down arrow button to select the Movie Menu to be set. 3. Press the left/right arrow button to select the Movie Menu to be set and press the button to confirm. 54 • AiAE (Artificial Intelligence AE) targets the camera's entire field of view.
Video Quality OIS Set the image resolution used during video recording. This mode can help reduce photo blur caused by unintentional hand shake, low light or slow shutter speed. The speed requirements for reading and writing high image pixel images to SD card are as follows: No.
Color Effect The Image Color Setting allows you to select different color effects. 1. Press the ting Menu. button to select the Image Color Set- 2. Press the left/right arrow button to select the Image Color Setting options.
Movie Setting Menu Digital Zoom Mode: button, and select 1. Press the video recording screen. to enter the Turn on or off the digital zoom. 2. Press the button, press the up/down arrow button to select , and press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. button 4. Select the items to be set and press the or the right arrow button to enter the menu. 5.
Playback Menu Mode: 1. Press the button to display the playback screen and press button to enter the menu. 2. Press the up/down arrow button to select the playback to be set and press button to enter. 3. Press the left/right arrow buttons to select an option and press the button to confirm. HDR With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. 1.
Red-Eye Reduction Rotate 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. You can use this setting to change the orientation of the picture. 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. 2. Press the press the button, select the settings, and button to display the settings screen. 3. Press the left/right button to select the corresponding menu or 「Cancel」 to return to the playback screen. 2. Press the press the 3.
Resize Color Effect This setting allows you to resize a picture to a particular resolution and saves it as a new picture. 1. In Playback Mode, press the left /right arrow button to select the photos to be edited. 2. Press the press the button, select the settings and button to display the settings screen. 3. Press the left/right arrow button to select 「1024X768」or「640X480」or select 「Cancel」 to return to the playback menu. 4. Press the 60 button to confirm the setting.
Playback Setting Menu Mode: 1. Press the button to show the playback screen, press the button, and press the up/down button to select . 2. Press the button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm. Refer to the following pages for more details about each setting. Protect To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. 3.
2. Press the up/down arrow button to select the sub-menu and press the button or right arrow button to show the settings screen. Delete You can delete one or all photo/video files. There are 3 sub menus available: • One: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. • All: Lock all photos or videos. • Reset: Cancel all locked photos or videos. 3. Press the up/down arrow buttons to select an option and press the button to confirm.
3. Press the up/down arrow buttons to select an option and press the button to confirm. The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. DPOF (Digital Print Order Format) The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the SD memory card to print without having to individually specify the photos you want to print.
Trim The Trim Setting allows you to crop photos and save them as new pictures. 1. Press the up/down arrow button to select「Trim」 and press the button or right arrow button to enter the menu. 2. Select「Yes」to confirm trim. Select a part to be trimmed using the zoom lever and arrow buttons to trim a photo. 64 3. Press the button and the「Save change?」 prompt appears. Select「 」to change and save the picture. Select「 」to cancel changes and return to the trim prompt screen.
Setup Menu Mode : 1. Press the button in any mode and press the up/down button to select . 2. Press the button to enter the menu. 3. Press up/down arrow button to select , and press the button or right arrow button to enter the menu. 4. Press the up/down arrow button to select the item to be set and press the button or right arrow button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button to confirm.
Sound Settings Power Saver To change this setting: This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD screen and camera off automatically after a consecutive period of inactivity. 1. Select「Sound Settings」in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the left/right arrow button to select an option. 1. Select「Power Saver」in the basic settings menu.
Zone The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD screen while you are abroad. 1. Select「World Time」in the basic settings menu. The World Time screen appears. 2. Press the up/down to select the departure place ( ) and destination ( ) fields. 3. Press the left/right arrow button to select a city located in the same time zone as that of the field. Press the button to confirm settings.
Note that when you perform the Format Memory function, it only formats the active memory. If an SD memory card is inserted, the SD memory card is active and will be formatted. If there is no SD memory card, the internal memory is active and the internal memory will be formatted. Formatting the SD memory card will not automatically format the internal memory. Copy to Card Use this setting to copy the files stored in the internal memory to an SD memory card. 1.
Reset FW Version Use this setting to restore the camera to its original default settings. Use this setting to view the current camera firmware version. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. 2. Press up/down arrow button to select and press the button or right arrow button to enter the menu. 2.
CONNECTIONS Connecting to a Computer You can use a USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be set to connect with either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. 2.
3. Connect the other end of the cable to an available USB port on your computer. Video System Use this feature to switch the video system from either NTSC or PAL. 1. Press the button, press the up/down arrow button to select and press the button to enter the menu. 2. Press up/down arrow button to select and press the button or right arrow button to enter the menu. 4. After the transmission is complete, disconnect the USB cable according to the instructions specifying how to safely remove USB devices. 3.
The video output signal can be switched to NTSC or PAL to accommodate different regional TV standards. The appropriate setting will vary between regions. NTSC: USA, Canada, Taiwan, Japan, etc. PAL: Europe, Asia (excluding Taiwan), Oceania, etc. Note: The TV output will not display properly if an incorrect video system is selected. 72 Set Eye-Fi SD Card Connection Mode This camera supports wireless connection of an EyeFi SD Card.
Connecting to a PictBridge Compatible Printer PictBridge technology allows printing of the photos saved in the memory card by the printer. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the owner's manual for specifications. With the PictBridge function on your camera, you can print the captured photos directly to a PictBridge compatible printer using the supplied USB cable, without the need for a PC. 3.
Connecting to your Printer 1. Make sure both the camera and printer are turned on. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge Menu will appear. Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 1. In the PictBridge menu, select「Print (with Date)」 and the screen as shown below appears. Press the up/down arrow button to select a menu item and press the button or right arrow button to enter the item.
3. Press the up/down arrow button to select the number of copies for the currently displayed photo. 4. Press the appear. button and the following screen will 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. Print (without Date) Use this setting to print the photos without dates on them. 1. In the PictBridge menu, select「Print (without Date)」and the screen as shown below appears. 2. Press the left/right arrow button to select a photo to be printed. 3.
Print Index You can print all photos in the camera via this function. 1. In the PictBridge menu, select「Print Index」and the screen as shown below appears. 5. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
Print DPOF Images Exit To use DPOF printing, you must select your photos for printing using the DPOF settings beforehand. See “DPOF” section on page 63. Select「Exit」to exit the PictBridge menu. At this time, the message「Remove USB Cable!」appears on the screen. 1. In the PictBridge menu, select「Print DPOF Images」and the screen as shown below appears. Disconnect the USB cable from the camera and printer. 2. Select「Yes」and press the button to confirm; select「Cancel」to cancel printing.
APPENDICES Specifications Design and specifications are subject to change without notice. Effective Imaging Sensor Pixels 16.15 Megapixels Total Image Sensor Pixels 16.44 Megapixels [1/2.3"CCD] Lens Focal Length 4.3mm (Wide) — 64.5mm (Tele) [35mm film equivalent] [24mm (Wide) — 360mm (Tele)] F number F3.3 (Wide) — F5.
Number of Recording Pixels Still Image (4:3) (3:2) (16:9) 16MP: 4608×3456 14MP: 4608×3072 12MP: 4608×2592 10MP: 3648×2736 2MP: 1920×1080 5MP: 2592×1944 3MP: 2048×1536 0.3MP: 640×480 Movie Image Compression DCF, DPOF (Ver1.1) Support File Format 80 720p30, 720p15, VGA, QVGA Best, Fine, Normal Yes Still Image Exif 2.3 (JPEG) Movie Movie Format: MOV (Motion JPEG), Audio: G.
Panorama 0°~ 180°(Horizontal) LCD Display 3.
Flash Flash Method Internal Flash Modes Auto, Red-Eye Reduction, Forced Flash, No Flash, Slow Synchro, Red-Eye Reduction + Slow Synchro Shooting Range (Wide) Approx. 0.5m ~ 4.7m (ISO800) (Tele) Approx. 1.0m ~ 2.6m (ISO800) Recording Media 82 Internal Memory: Approx. 8MB SD/SDHC Card (Up to 32GB Support) [Nonsupport MMC Card] Other Features PictBridge, ExifPrint Support, Multi-Language Support (27 Languages) Jacks AV-OUT/USB 2.
Prompts and Warning Messages Message Description Action Warning! Battery exhausted. The camera battery is used up. It is a warning indicating that the camera is going to shut down. Replace with new batteries. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn off the camera and restart it to reset the lens. Battery temperature is too high. The battery temperature reaches 53.5oC.
Message 84 Description Action Warning! Do not turn off your camera during update! The message appears during the firmware update process. The message disappears after the camera update and restart. Connection Failed! Failure to connect to your PC, printer, TV. Remove USB cable and retry connection Slow access When a SD card lower than Class 4 is used to record a HD movie, the writing speed will be slower and recording will not continue. Cannot write to SD card.
Message Description Action Write Protect ! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. The message will disappear after 2 seconds. Card Full ! Indicates that the SD card is full. Replace SD card with another that has available memory. The message will disappear after 2 seconds. Memory Full ! Indicates that the camera memory is full. It disappears after 2 seconds.
Message 86 Description Action This image cannot be edited. The file format does not support editing or the edited file cannot be edited again. The message will disappear after 2 seconds. Exceeded maximum folder number. This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. Copy the data to your PC, format the memory card using the camera. Too many pictures for quick processing.
Troubleshooting Problem Camera does not turn on Possible causes The battery has been depleted. The battery is not inserted correctly. Solution Recharge the battery. Correctly reinstall the battery. Camera turns off suddenly during operation The batteries have been depleted. Recharge the battery. The picture is blurred Camera shakes while taking a picture. Turn on OIS feature. Images and video files cannot be saved The SD memory card is full. The memory card is locked.
Problem Solution Saving data to memory card is slow Using a memory card below Class 4 may result in slower recording times. Use an SD card with write Class higher than 4 to improve performance. Cannot write to the memory card The SD memory card has been locked. Release the write lock of the memory card or replace with another card. The camera may experience trouble recording HD movies to SD cards with a rating lower than Class 4. Use an SD card with write Class higher than 4 to improve performance.
The Kodak trademark and trade dress are used under license from Kodak. © 2013 by JK Imaging Ltd. All rights reserved. JK Imaging Ltd. 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA www.kodakcamera.jkiltd.