KODAK PIXPRO FZ43 DIGITAL CAMERA User Manual
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA Company Website: kodakpixpro.com For Customers in the U.S.A. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd..
SAFETY NOTES Safety Notes for this Camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to help prevent dust or sand from entering the camera, causing possible damage. Do not use or store the camera in a hot environment or in direct sunlight. Do not use or store the camera near powerful magnetic fields, such as a magnet or transformer. Avoid touching the lens of the camera.
Safety Notes for Batteries If battery fluid leaks inside the camera, contact our customer service department immediately. If battery fluid leaks onto your skin, rinse your skin immediately with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with your local (national or regional) regulations. To prevent batteries from being damaged, do not drop batteries or allow them to hit solid objects or to be scratched by foreign objects.
Safety Notes for Memory Cards We highly suggest buying only well-known, name brand memory cards to ensure peak performance and reliability. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. When using your camera on an airplane, observe the relevant rules specified by the airline and FAA regulations. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels. These pixels do no effect the quality or performance of the camera, photos or video.
CONTENTS BEFORE YOU START............................. 1 SAFETY NOTES.................................... 3 CONTENTS........................................... 7 GETTING READY................................... 11 Accessories Included.................................... 11 Part Names.................................................... 12 Installing Battery and Memory Card............. 14 Turning Camera On and Off......................... 16 Set your Language, Date/Time.....................
Panorama Mode............................................ 27 Thumbnail View............................................. 37 Scene Mode .................................................. 28 Using Zoom Playback (for still pictures only)............................................................... 38 Auto Scene Mode................................... 30 BASIC OPERATION............................... 31 Flash Mode.................................................... 31 Macro Mode..........................
Scene....................................................... 44 Rotate...................................................... 52 Photo Shooting Setting Menu...................... 46 Playback Setting Menu................................. 53 Quality..................................................... 46 Protect..................................................... 54 AF Assist Beam........................................ 47 Delete...................................................... 54 Digital Zoom...
Format..................................................... 59 Connecting to your Printer..................... 68 Copy to Card........................................... 60 Using the PICTBRIDGE™ Menu...................... 69 File Numbering........................................ 61 Print (with Date)...................................... 70 Reset........................................................ 62 Print (without Date)................................. 71 Firmware (FW) Version...................
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer first or our customer service center.
Part Names 12 1 Flash Lamp 6 Zoom Button 11 Delete Button/Arrow Button (Down) 2 AF Assist Beam/ Self-Timer Lamp 7 Indicator Lamp 12 Macro Button/Self-Timer Button/ Arrow Button (Left) 3 Lens 8 Playback Button 13 SET Button 4 Microphone 9 Display Button/Arrow Button (Up) 14 Menu Button 5 LCD 10 Flash Button/Arrow Button (Right) 15 Mode Button
16 Strap Eyelet 19 Fast Video Recording Button 22 Battery Cover 17 Micro USB Port 20 Power Button 23 Tripod Socket 18 Shutter Button 21 Speaker 13
Installing Battery and Memory Card 1. Open the battery cover door. 2. Insert the batteries into the battery slot in the correct direction as shown in the following diagram: Please use brand name batteries (such as Energizer® or Duracell®) for optimal performance. Do not mix new and old batteries or use different brands of batteries. When replacing batteries, please replace all 2 batteries at the same time. The performance and life expectancy of alkaline batteries will vary depending on the brand.
3. Insert the memory card into the memory card slot as shown in the diagram below: 4. Close the battery cover door. Write Protection Toggle Switch A memory card (SD/SDHC) is optional and not included in all camera packaging. It needs to be purchased separately. Please use an original memory card which is Class 4 or higher and has a capacity of 4GB to 32GB. To remove your memory card, open the battery cover door, gently press the memory card to eject it and remove it carefully.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button When the power is off, press and hold the play 16 button to power on and enter Playback mode.
Set your Language, Date/Time Set your Language, Date/Time after the First Power-On 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the arrow buttons to select your desired language. 3. After you press the button to confirm your language selection, the Date/Time settings screen will appear. 4. Press the left/right arrow buttons to select the Date/Time to be adjusted: Time is displayed in YYYY.MM.DD/HH:MM. 5.
Resetting your Language After you set your desired language for the first time, follow the instructions below to reset your desired language. button and press the up/down 1. Press the . Press the button arrow buttons to select to enter the menu. 2. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow buttons to select [Language] and press the button or right arrow button to enter the menu. 4.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. button and press the up/down 1. Press the . Press the button arrow buttons to select to enter the menu. 2. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 3. Press the up/down arrow buttons to select [Date & Time] and press the button or right arrow button to enter the menu. 4.
MODE OVERVIEW Display Setting Press the button to display the settings: Classic, Full, Off. Classic: Displays the camera parameters on screen SD x 1234 16M 00:56:00 -0.3 EV 400 ISO Full: Camera parameters with Grid and Histogram SD x 1234 16M 00:56:00 -0.
LCD Display Overview of the Screen Icons in Photo Shooting Mode 7. White Balance (Adjustable in mode) 8. Color Effect (Adjustable in 9. Number of Remaining Shots SD x mode) 10. Image Size 1234 16M 00:56:00 F3.3 15 -0.3 EV 400 ISO 11. Video Quality 12. ISO Value (Adjustable in mode) 13. Remaining Recording Time 14. Exposure Compensation (EV value) (Adjustable in mode) 1. Shooting Mode 2. Macro Mode 15. Focus Frame 16. Shutter Speed 3. Self-Timer 17. Histogram 4.
Overview of the Screen Icons in Movie Mode 4. SD Memory Card/Built-In Memory 5. Battery Status 6. Remaining Recording Time SD x 7. Video Quality 8. Exposure Compensation (EV value) 9. Focus Frame 00:56:00 -0.3 EV 1. Movie Mode 2. Macro Mode 3. Zoom Display (Visible when pressing the Zoom button) 22 10. Self-Timer 11. AF Mode For optimal video shooting, it is recommended that an SDHC memory card be used.
Overview of the Screen Icons in Playback Mode 1. Film File 2. DPOF File 3. File Protection 1/45 SD 4. Memory Space (indicating the current number of photos and total number of photos) 5. SD Memory Card/Built-In Memory x2 00:01:23 2015 04-01 15:37 6. Battery Status 7. Slide Setting/Film Playing 8. Zoom Magnification Area 9. Shooting Date 10. Film Length/Number of Photos with Burst Shooting 11. Video Quality 12.
Using the Mode Button This camera provides a convenient mode button that allows you to manually switch among different camera settings with ease. Available modes are listed below: Mode Name 24 Icon Description Manual Mode Many of the camera settings can be configured manually in this mode. Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures. Movie Mode Record videos.
Manual Mode When selecting ISO. Auto Mode (Manual Mode), you can set EV/ 1. Press the button to select Manual Mode ), press the to confirm. ( 2. Press the button. Auto mode is the most common and easiest mode to take photos. While operating in this mode, the camera automatically optimizes numerous camera settings to optimally adjust settings for your photos and videos for the best possible results. Follow these steps: 1. Press the button to select Auto Mode ( ). 2.
Movie Mode 1. Press the button to select Movie Mode ( ). Movie Mode 2. Press down the Shutter Button to start recording. 3. Once you are finished, press the Fast Video Recording Button or the Shutter Button to stop recording and return to the shooting screen.
Panorama Mode With Panorama Mode, you can take a series of pictures which will be stitched automatically into an ultra-wide panoramic picture by the camera. Follow the steps below: 1. Press the ). ( button to select Panorama Mode 2. Use the left/right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic sequence will commence automatically. 3. Compose the first view of the panoramic picture on the LCD and press the shutter button to capture the image. 4.
Scene Mode You can select your desired scene from the 23 preset modes according to the type of environment you are shooting in. The camera then automatically configures the most appropriate settings for the best possible photos. Press the button to select Mode. Press the arrow buttons to select a scene, and press the button to confirm. Scene 28 Description Auto Scene Identifies the scene automatically; Portrait, Backlit Portrait, Landscape, Macro, Night Landscape, Night Portrait and Auto.
Scene Description Glass For objects behind transparent glass. Photo Frame For adding interesting frame effects to the photo. Panning Shot Suitable for capturing fast moving objects to have a clear subject with a blurred background. Text For taking pictures of text, documents or white boards. Portrait Most suitable for capturing people with focus on their face. Fish Eye For an interesting fish eye effect.
Auto Scene Mode In Scene Mode ( ), the camera can intelligently detect different environments and automatically select SD the best scene and photo settings for you. 1. Press the button to select Mode, then select Function. 2. Hold the camera steadily and aim at the subject. The optimum Scene Mode 1234 16M will be selected automatically. 3. Press the shutter button half-way down to focus. 4. Press the shutter button all the way down to take pictures.
BASIC OPERATION Flash Mode The Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows. 1. Press the right arrow button ( • The flash will engage with each shot even if there is enough available light to take the photo without flash. ) to enter the Flash Settings Menu. Fill Flash • Slow Sync. This allows for night scenery photos that include people in the foreground.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( ) to enter the 2. Press the left/right buttons to select the following 2 modes: • Macro Off Select this option to disable Macro. Macro Menu. • Macro On Select this to focus on subjects 5cm from the lens. button to confirm the settings and 3. Press the exit the menu.
Self-Timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set to 2 seconds, 10 seconds or Smile Detection. 1. Press the left arrow button ( ) to enter the 3. Press left/right buttons to select the following 4 modes: • Self-Timer Off Disables the Self-Timer. Marco Menu. • Self-Timer 2sec A single picture is shot 2 seconds after the shutter button is pressed. • A single picture is shot 10 seconds after the shutter button is pressed.
EV Setting EV function menu of the camera consists of EV mode) and adjustment (This can be adjusted ISO adjustment (This can be adjusted mode). With proper function setting, the user can take pictures with better effects. -0.3 EV 400 ISO -0.3 EV 800 ISO Please refer to manual mode on page 25 for EV setting operation steps. 34 The adjustable range of exposure value is from EV -2.0 to EV +2.0.
Using the Zoom Function Using Quick Recording Your camera is equipped with two types of Zoom Functions: Optical Zoom and Digital Zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. In the Photo Shooting Mode, press the Recording to begin recording video. Short Cut button x Zoom Indicator 00:00:06 SD x 1234 16M 00:56:00 -0.3 EV Once you are finished, press the Recording Short Cut button or the Shutter Button to stop and store the video.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Use the left/right navigation buttons to scroll through the photos or video clips stored on the built-in memory or on the Memory Card in the camera. 3. To play a selected video clip, press the button to enter the Movie Playback Mode. During video playback, the operating instructions will appear on the screen.
Thumbnail View When in Playback Mode, press the and videos on the screen. button on the Zoom button to display thumbnail images of photos 1. Slide the Zoom button to switch between 3 x 3 and 4 x 4 thumbnails. 2. When a 3 x 3 or 4 x 4 thumbnail is displayed, press the arrow buttons to select a picture or video clip to view. If the indicator appears on the LCD, then a movie file is currently being displayed. Press the button to restore a preview icon to its original image size.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the Zoom Button to zoom in on the photos, 2 to 8 times their original magnification. 1. Press the left/right buttons to select the picture on which to use the zoom feature. 2. Press the button on the Zoom button to zoom in. 3. The bottom right corner of the screen will display the amount zoomed in as well as the area of the photo shown. x2 4.
Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press the 2. Press the button to enter playback screen. button to enter slide option. 3. Press the left/right buttons to select Slideshow playing or [Cancel] to return to the playback screen. Cancel 4. Press the button to confirm the setting.
Photos and Video Deletion In Playback Mode, press the down arrow button ( ) to select your photos and videos. To delete photos or videos: 1. Press the button to switch to Playback Mode. 2. Press the left/right arrow buttons to select the photos and videos to be deleted. 3. Press the down arrow button ( ) and the deletion screen is displayed. Delete One Exit 4. Press the up/down arrow buttons to select [Delete One] or [Exit] and press the Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Image Size Mode: 1. In Photo Shooting Mode, press the to enter the Photo Shooting Menu. button 2. Press the up/down arrow buttons to select the Photo Shooting Menu and settings. 3. Press the left/right arrow buttons to select the Photo Shooting Menu to be set and press the button to confirm. 16M 16M The size setting refers to the image resolution in pixels.
Continuous AF Continuous Shot Use the Continuous AF setting to be able to continuously focus automatically when taking pictures. Use this setting to perform continuous shooting. 16M 16M Single Cont. AF:Off Cont.AF: Off There are 2 options: There are 2 options: • Off • On Setting Continuous AF to On will reduce battery life. 42 • Single • Continuous Shot Press the shutter button to start continuous shooting.
Focus Setting Color Effect In different photo shooting modes, you can select different focus methods. This setting allows you to select different modes for optimum focus. 16M Normal Single-AF There are 2 options: • Single-AF:The focus frame appears on the center of the LCD to help you focus on the subject. • Multi-AF: The camera automatically focuses the subject in a wider area to find the focal point.
White Balance Setting Scene The White Balance Setting allows you to adjust the color temperature for different lighting scenes to ensure the most accurate color reproduction. Select the Scene Mode under the SCN Mode.
• Options in the shooting mode (O: Available X: Unavailable) Shooting Modes Options Image Size O O X O Continuous AF O O X X Continuous Shot O O X X Focus Setting O O X X Color Effect O X X X White Balance Setting O X X X Scene X X X O 45
Photo Shooting Setting Menu Mode: Quality 1. Press the button in Photo Shooting Mode and press the up/down button to select . The Quality Setting can be used to adjust the image compression ratio. ਘ⥺गٵ੫ Press SET to Enter Press SET To Enter Menu MENU 2. Press the button to enter the menu. 3. Press the up/down arrow buttons to select button or right arrow button to and press the enter the menu. 4.
AF Assist Beam Digital Zoom In a darker environment, the AF Assist Beam setting can be turned on for better focus. Turn on or off the digital zoom.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time. There are 4 options: • Off • 1 sec • 2 sec There are 3 options: • 3 sec • Off • Date • Date / Time 48 A shorter quick review time will improve battery life.
Movie Menu Mode: Video Quality 1. Press the button, select the mode and press the button to enter the Movie Menu. Set the image resolution used during video recording. Size: 720p 30fps Size: 720p 30fps 2. Press the up/down arrow buttons to select the Movie Menu to be set. 3. Press the left/right arrow buttons to select the Movie Menu to be set and press the button to confirm. The speed requirements for reading and writing high resolution image pixel images to an SD card are as follows: No.
Movie Setting Menu Digital Zoom Mode: 1. Press the press the button, select the mode and button to enter the Movie Menu. 2. Press the up/down arrow buttons to select button to enter the menu. and press the Turn on or off the digital zoom. , Press SET to Enter Press SET To Enter Menu MENU There are 2 options: • Off 3. Press the up/down arrow buttons to select , button or right arrow button to and press the enter the menu. 4.
Playback Menu 1. Press the button to display the playback screen and press the button to enter the menu. 2. Press the up/down arrow buttons to select the playback desired and press the 3. Press the left/right arrow buttons to select an option and press the button to enter. button to confirm. Press SET to confirm Red-Eye Reduction Refer to the following pages (P 52) for more details about each setting.
Red-Eye Reduction Rotate Use this setting to remove red eye in your photos. You can use this setting to change the orientation of the picture. Red-Eye Reduction Turn Right There are 2 options: • Red-Eye Reduction • Cancel There are 3 options: • Turn Right • Turn Left • Cancel Videos and panoramic pictures cannot be rotated. The rotated picture file will replace the original photo.
Playback Setting Menu 1. Press the to select 2. Press the . button to show the playback screen, press the button, and press the up/down button button to enter the menu. Press SET to Enter Press SET To Enter Menu MENU 3. Press the up/down arrow buttons to select menu. and press the button or right arrow button to enter the 4. Press the up/down arrow buttons to select the item to be set and press the button to enter the menu. 5.
Protect Delete To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. You can delete one or all photo/video files. There are 2 options: There are 3 options: • One: • All: Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. Lock all photos or videos. • Reset: Cancel all locked photos or videos. • One: Delete one photo or video. • All: Delete all photos or videos.
DPOF (Digital Print Order Format) Trim The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the SD memory card to print without having to individually specify the photos you want to print. The Trim Setting allows you to crop photos and save them as new pictures. There are 3 options: • One • All • Reset The printer that supports DPOF is needed for photo printing. 1.
Setup Menu 1. Press the 2. Press the button in any mode and press the up/down button to select button to enter the menu. 3. Press the up/down arrow buttons to select menu. and press the button or right arrow button to enter the 4. Press the up/down arrow buttons to select the item to be set and press the button to enter the menu. 5. Press the up/down arrow buttons to select an option and press the button or right arrow button to confirm.
Sound Settings Power Saver To change this setting: This setting allows you to save power and get the maximum possible running time for your camera's batteries. Follow the steps below to turn the LCD and camera off automatically after a consecutive period of inactivity. 1. Select [Sound Settings] in the basic settings menu. Press the button or right arrow button to enter the menu. 2. Press the left/right arrow buttons to select an option. 1. Select [Power Saver] in the basic settings menu.
Language Refer to the “Reset your language” section on page 18. World Time The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. 1. Select [World Time] in the basic settings menu. The World Time screen appears. 2. Press the up/down to select the departure place ( ) and destination ( ) fields. 3. Press the left/right arrow buttons to select a city located in the same time zone as that of the field.
File / Software Format Please Note: formatting enables you to delete all contents on the memory card and camera’s built-in memory, including protected photo and movie files. To use this setting: 1. Press the button, press the up/down arrow and press the button to buttons to select enter the menu. 2. Press the up/down arrow buttons to select button or right arrow button to and press the enter the menu. 3.
Copy to Card Use this setting to copy the files stored in the internal memory to an SD memory card. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the and press the button or right arrow button to enter the 3. Press the up/down arrow buttons to select [Copy to Card] and press the to enter the menu. 4. Press the up/down arrow buttons to select [Yes] or [No] and press the button or right arrow button button to confirm.
File Numbering After you take a picture or video clip, the camera will automatically save it with a sequential number. You can use this to reset the file numbering to 1. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the and press the button to enter the button or right arrow button to enter the 3. Press the up/down arrow buttons to select [File Numbering] and press the button to enter the menu. 4.
Reset Use this setting to restore the camera to its original factory default settings. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the and press the button or right arrow button to enter the 3. Press the up/down arrow buttons to select [Reset] and press the the menu. button or right arrow button to enter 4.
Firmware (FW) Version Use this setting to view the current camera firmware version. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the and press the button to enter the button or right arrow button to enter the 3. Press the up/down arrow buttons to select [FW Version] and press the enter the menu. button or right arrow button to 4. When there is a new firmware version in the SD card, select [Yes] to update.
CONNECTIONS Connecting to a Computer You can use a micro USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB Mode The camera’s USB port can be used to connect to either a computer or a printer. The following steps will allow you to ensure that the camera is correctly configured to connect with a computer. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the 3.
Transferring Files to Your Computer The computer will automatically detect the camera as a removable drive. Double-click the "My Computer" icon on the desktop to locate the removable drive and to copy folders and files in the drive to a directory on your computer as you would copy any typical folder or file. Follow the steps below to connect the camera to a computer: 1. Make sure both the camera and computer are turned on. 2.
Video System Use this feature to switch the video system from either NTSC or PAL. 1. Press the menu. button, press the up/down arrow buttons to select 2. Press the up/down arrow buttons to select menu. and press the and press the button to enter the button or right arrow button to enter the 3. Press the up/down arrow buttons to select [TV-System] and press the enter the menu. 4. Press the up/down arrow buttons to select [NTSC] or [PAL] and press the button or right arrow button to button to confirm.
Connecting to a PICTBRIDGE™ Compatible Printer PICTBRIDGE™ technology allows printing of the photos saved in the memory card by a printer. To find out if a printer is PICTBRIDGE™ compatible, simply look for the PICTBRIDGE™ logo on the packaging or check the owner's manual for specifications. With the PICTBRIDGE™ function on your camera, you can print the captured photos directly to a PICTBRIDGE™ compatible printer using the supplied micro USB cable, without the need for a PC. 3.
Connecting to your Printer 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied micro USB cable to the micro USB port on your camera. If the camera is not connected to a PICTBRIDGE™ compatible printer, the following error message will appear on the LCD. 3. Connect the other end of the cable to the USB port on the printer.
Using the PICTBRIDGE™ Menu After setting the USB mode to Printer, the PICTBRIDGE™ Menu will appear. Press the up/down arrow buttons to select a menu item and press the enter the item. button or right arrow button to Refer to the following sections for more detailed information on each setting.
Print (with Date) If you have set the date and time on your camera, the date and time will be recorded and saved with each photo you take. 3. Press the up/down arrow buttons to select the number of copies for the currently displayed photo. 1. In the PICTBRIDGE™ menu, select [Print (with Date)] and the screen as shown below appears. 4. Press the button and the following screen will appear. 2. Press the left/right arrow buttons to select a photo to be printed. 70 5.
Print (without Date) Use this setting to print the photos without dates on them. 4. Press the button and the following screen will appear. 1. In the PICTBRIDGE™ menu, select [Print (without Date)] and the screen as shown below appears. 2. Press the left/right arrow buttons to select a photo to be printed. 5. Select [Yes] and press the button to confirm; select [Cancel] and press the button to cancel printing. 3.
Print Index Print DPOF Images You can print all photos in the camera via this function. To use DPOF printing, you must select your photos for printing using the DPOF settings before hand. See “DPOF” section on page 55. 1. In the PICTBRIDGE™ menu, select [Print Index] and the screen as shown below appears. 2. Select [Yes] and press the button to confirm; select [Cancel] and press the button to cancel printing. 72 1.
Exit Select [Exit] to exit the PICTBRIDGE™ menu. At this time, the message [Remove USB Cable!] will appear on the screen. Disconnect the micro USB cable from the camera and printer.
APPENDICES Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3" CCD Effective Ective Pixels 16.15 Megapixels Total Pixels 16.44 Megapixels Focal Length 4.9 mm (Wide) — 19.6 mm (Tele) 35mm Film Equivalent 27 mm (Wide) — 108 mm (Tele) F Number F3.0 (Wide) — F6.
Number of Recording Pixels Still Image Movie (4:3) (3:2) (16:9) 16MP: 4608 X 3456 10MP: 3648 X 2736 5MP: 2592 X 1944 3MP: 2048 X 1536 0.3MP: 640 X 480 14MP: 4608 X 3072 12MP: 4608 X 2592 1280 X 720 (15/30fps), 640 X 480 (30fps), 320 X 240 (30fps) Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 2MP: 1920 X 1080 Still Image Exif 2.3 (JPEG) Movie Movie Format: MOV (Motion JPEG), Audio: G.
LCD Display 2.
Recording Media Internal Memory: Approx. 8 MB SD/SDHC Card (Up to 32 GB Support) [MMC Card Not supported ] PictBridge, ExifPrint Support Yes Multi-Language Support 27 Languages Jacks AV-OUT/USB 2.0 (Micro 5 pin USB) Power 2 x AA Alkaline Battery, AA NiMH Battery [Not Included] Shooting Capability (Battery Performance) AA Alkaline Batteries: Approx. 120 shots (Based on CIPA standards) Operation Environment Temperature: 0 ~ 40 °C, Humidity: 0 ~ 90% Dimensions (W X H X D) Approx. 93.0 X 60.
Prompts and Warning Messages 78 Message Description Warning! Battery exhausted. The camera batteries are depleted. It is a warning indicating that the camera is going to shut off. Replace with new batteries. The camera will shut down in 2 seconds. Action Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn the camera off and restart it to reset the lens. Suggest using tripod.
Message Description Action Connection Failed! Failure to connect to your PC, printer, TV Remove micro USB cable and retry connection Write Protect! The SD card is locked. Remove SD card and switch the lever on the side of card to UNLOCK. The message will disappear after 2 seconds. Card Full! Indicates that the SD card is full. Replace SD card with another that has available memory. This message will disappear after 2 seconds. Memory Full! Indicates that the camera memory is full.
Message 80 Description Action Card is not formatted. When an error occurs with the memory card, the message “Not Formatted” will appear. Format the memory card. WARNING: Formatting the SD card will erase all data on the card. Copy the data from the memory card to another storage device, such as a computer. Otherwise, all data will be erased after the format. This message will disappear after 2 seconds.
Message Description Action Exceeded maximum folder number. This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. Copy the data to your PC, and format the memory card using the camera. Too many pictures for quick processing. During the playback by date, the images exceed specifications so that it is not possible to play by date.
Troubleshooting Problem Solution Camera does not turn on Camera turns off suddenly during operation The batteries have been depleted. Replace the batteries. The picture is blurred Camera shakes while taking a picture. Turn on OIS Feature. Please use tripod for high magnification (above 15X) Optical Zoom. Images and video files cannot be saved Images will not print from the connected printer 82 Possible causes The batteries have been depleted. The batteries are not inserted correctly.
Problem Saving data to memory card is slow Possible causes Using a memory card below Class 4 may result in slower recording times. The SD memory card has been locked. Cannot write to the memory card Too many movies to process The camera may experience trouble recording HD movies to SD cards with a rating lower than Class 4. The number of pictures or folders in the memory card exceed the specifications, so the playback of data folder can not be displayed.
© 2019 JK Imaging Ltd. All Rights Reserved. The Kodak trademark, logo and trade dress are used under license from Eastman Kodak Company. All other logos, products or company names that are referred to in this document are trade names, trademarks or registered trademarks of their holders. The holders are not affiliated with JK Imaging Ltd., our products or our website. JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA kodakpixpro.com Made in Myanmar Ver. 4.
