Operation Manual

A-61560 January 2010 3-3
• For scanning jobs of more than 5 pages, put the scanner in the
downward position when using the output tray extension.
• The output tray can be extended to accommodate documents up
to 14 inches in length.
Getting your
documents ready to
scan
1. Standard paper size documents feed easily through the scanner.
When organizing your documents for scanning, stack the
documents so the lead edges are aligned and centered in the input
tray. This allows the feeder to introduce documents into the scanner
one at a time.
2. Remove all staples and paper clips before scanning. Staples and
paper clips on documents may damage the scanner and
documents.
3. All inks and correction fluids on the paper must be dry before
scanning is started.
4. Place the documents you want to scan in the input tray of the
scanner. Be sure the front side of your document(s) is positioned
against the input tray and the top of the document(s) is inserted into
the input tray first (see below).