Operation Manual

A-61555 April 2009 1-7
Environmental
information
• The product packaging is recyclable.
• The i1800 Series Scanners are Energy Star compliant and are
shipped from the factory with the default time set to 15 minutes.
European Union This symbol indicates that when the last user wishes to discard this
product, it must be sent to appropriate facilities for recovery and
recycling. Please contact your local Kodak representative or refer to
www.kodak.com/go/recycle for additional information on the collection
and recovery programs available for this product.
Battery Information This product contains a Lithium Ion button cell battery. This battery can
only be removed or replaced by a qualified Service Engineer.
EMC statements IMPORTANT: Compliance with regulations governing radio frequency
emissions requires that the installation of your Kodak
i1800 Series Scanners use the shielded data cable
provided. Any data cable the user may choose to
substitute also must be shielded to assure continued
compliance.
United States This equipment has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequently energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
Japan This is a Class A product based on the standard of the Voluntary
Control Council for interference by information Technology Equipment
(VCCI). If this equipment is used in a domestic environment, radio
disturbance may arise. When such trouble occurs, the user may be
required to take corrective action.