Operation Manual

13
5
For iOS system
Due to incompatibility on some operating systems, the formatting of
some documents may not be preserved. We recommend the use of
PDF les to minimize formatting inconsistencies.
Your device can only wirelessly connect to one signal at a time. Therefore,
while your device is wirelessly connected to the KODAK iShow 1000 Pico
Projector, live streaming functions (such as YouTube
®
and Facebook
®
)
and web browsers will not be accessible on your device.
1. To project data wirelessly on the KODAK iShow 1000 Pico Projector, the
iShow (wireless projector) app and the les you wish to project
must be loaded on your device.
2. To download the iShow (wireless projector) app , turn on your
device and activate an internet connection. Open the App Store
®
and
search for iShow (wireless projector) app . Download and install it
on your device.
3. To sync your documents, use your device’s data cable to connect your
device to the computer. Then, open iTunes
®
on the computer.
4. Find your device name (iPhone, iPad or iPod touch) shown in the iTunes
screen and click on it to enter the device's [Summary] pane.
5. Once entering the device’s [Summary] pane, click the [Apps] on the top
command line. Find the iShow (wireless projector) app icon at the
lower side of the Apps pane and click the icon to add the les you would
like to project.
6. Once you have completed adding les, you may disconnect the device
from the computer.
7. To start projecting, rst ensure that your device’s wireless functionality is
turned on. Then, power on your KODAK iShow 1000 Pico Projector by
pressing the power button for 3 seconds.
Setup iShow (wireless projector) app
for projection