Operation Manual

16
9. Once the le type is selected, the appropriate les will appear. Tap the
le that you want to project. Once you have nished displaying this le,
return to the le selection pane to choose your next le.
For Windows system
1. Use enclosed CD-ROM to install iShow (wireless projector) app on
your computer.
2. Power on your KODAK iShow 1000 Pico Projector by pressing the power
button for 3 seconds.
3. When the pico projector starts, your computer’s wireless network will
automatically detect the signal “iShow-XXXX” (signal name is the same
as the SSID name, which can be set by the user). Select this signal and
your computer will be connected to the projector.
4. Click on the installed iShow (wireless projector) app on your
computer and the le selection pane will appear as shown below.
5. Click the setting button on the interface of iShow (wireless
projector) app. Select [Add File Folders] to add the folders you would
like to project. You can add up to 10 folders. You can also choose [Open
File] to select a single le in the le management system. Then click
[Send] to add it to the application.