Operation Manual

21
8
Firmware Update
When there is a new version of rmware, follow the following steps to update
the rmware of the pico projector:
1. Download the new rmware to the computer's hard drive.
2. Turn on the KODAK iShow 1000 Pico Projector and connect to the power
charger.
3. Use the wireless network to connect the computer containing the
rmware upgrade to the projector. Open a web browser, and enter the
IP (192.168.203.1) to access to the rmware update interface.
4. Operate according to the instructions on the update interface to update
the rmware of the projector.
Only rmware update via a computer is supported.
The web browser used must have the Javascript support function.
You may use the following web browsers for rmware update:
Firefox 12 and above
IE 8 and above
Google Chrome 18 and above
Opera 12 and above
Safari 5.1 for Windows and above
Safari for MAC OS X 6.0 and above