KODAK EASYSHARE P87 Digital Frame Extended user guide www.kodak.com For help with your digital frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Kodak, 2011 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. SD logo is a trademark used under license by Kodak.
Product features Frame features 1 2 4 3 5 6 7 11 10 8 9 1 Mode button 6 Memory card slot - SD/MMC/xD/MS 2 OK/4-way navigation 7 Power button 3 Back button 8 Power cable, DC-In 5V 4 Wall mount hole 9 Stand 5 USB high-speed host—connect to USB 10 Stand storage flash drive or card reader www.kodak.
Product features Main control panel—icons OK Press OK (on back) to display the main control panel. Press to highlight an icon, then press OK to select it. Icon Main control panel. Description Play—start playing a slide show. Pause—resume a paused slide show (see page 18). Pictures—find your pictures by: all, date, folders, keywords, people, favorites (see page 11). The Pictures icon changes to indicate your current picture source: internal memory, memory card, USB flash drive or device.
Table of contents 1 1 Getting started ......................................................................................1 Attaching the stand....................................................................................... 1 Storing the stand .......................................................................................... 1 Attaching the power cable ............................................................................ 2 Navigation buttons ........................................
Table of contents Maintaining your frame............................................................................... 28 Learning more about your frame.................................................................. 28 4 Troubleshooting and support ..............................................................29 Picture frame problems ............................................................................... 29 Screen messages.......................................................................
1 Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler! Attaching the stand Attach the stand Push the notched end of the stand into the back of the frame until it snaps into place. When displayed with the stand extended, the frame rests at a 75° angle. Storing the stand Remove the stand Pull the stand to remove it from the back of the frame. Store the stand Snap the stand into the holder. www.kodak.
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. If more than one plug is included, use the plug for your type of power outlet. ■ The frame automatically turns on when you plug it in for the first time. ■ If the frame loses power or you unplug it for more than a minute, you are prompted to reset the time and date when power is restored or when you plug it back in. 2 www.kodak.
Getting started Navigation buttons Mode 4-way/OK Back Buttons Press to: Navigate left or view the previous picture Navigate right or view the next picture Navigate up or highlight the previous screen item Navigate down or highlight the next screen item Select or accept the highlighted screen item Cycle through the available viewing modes Return to the previous screen www.kodak.
Getting started Setting your language The language screen appears the first time you turn on your frame. Press to highlight your language, then press OK. To change the language at a later time: 1 Press OK to pause a slideshow and display the control panel icons. 2 Press to highlight 3 Press to highlight Language, then press OK. 4 Press to highlight your language, then press OK. 4 (Settings), then press OK. www.kodak.
Getting started Setting the time, date, and on/off times The first time you turn on your frame, the Time, Date, and On/Off screens appear automatically after you select your language. To set the current date and time: Press to change values. Press to move to the next entry. When you’ve entered all the settings, press OK. For details on setting the 12- or 24-hour clock, current time, date, and on/off times, see page 22.
Getting started Inserting a memory card To insert a card, push it firmly into the slot. To remove a card, pull it out of the slot. MS* xD MMC (MULTIMEDIA Card) SD/SDHC (SECURE DIGITAL) IMPORTANT: *If you are using a micro or mini memory card (MS PRO or MS PRO Duo), insert it into an adapter first or it could get stuck in the display card slot. Memory cards and adapters are sold separately. 6 www.kodak.
Getting started Inserting a USB device Supported USB devices include flash drives and card readers. USB devices are sold separately. www.kodak.
Getting started Copying pictures to your frame Copy pictures to your frame’s internal memory from a memory card or USB device. Each time you insert a card or USB device, press OK and follow the copy directions. CAUTION: Do not remove a card or disconnect a device while copying. Your card, pictures, or device could be damaged. 1 Insert a memory card or USB device (flash drive, card reader, hard drive). The pictures start playing.
Getting started Copying pictures from a computer, using a memory card The easiest way to copy a large number of pictures from your computer to your frame’s internal memory: 1 Insert an empty memory card or USB device into your computer. 2 Copy some or all of the pictures from your computer onto the card or USB device. 3 Remove the card or USB device from your computer, and insert it into the frame. 4 Follow the copy directions on page 8 (highlight All pictures, then press OK).
2 Viewing pictures View pictures from your frame’s internal memory or any connected picture source (memory card, USB device). ■ By default, pictures play in random order. For different ways of viewing your pictures, see Searching for and viewing your pictures, page 11. ■ You can change the duration (how long each picture stays on the screen) and transition style between pictures. See Changing frame settings, page 19.
Viewing pictures Searching for and viewing your pictures NOTE: The buttons and controls you use to search for and view pictures are located on the back of the frame. See Navigation buttons, page 3. 1 Press OK to pause a slide show and display the control panel icons. 2 Press to highlight (Pictures), then press OK. NOTE: The Pictures icon changes to indicate your current picture source (see page ii). 3 Press to highlight the different ways to search for and play your pictures.
Viewing pictures Date—searching and viewing by date Select and press OK. A film strip of the pictures in the current picture source is displayed, organized by date. NOTE: Make sure the time and date are set accurately on your camera or other capture device. If you modify pictures on your computer, the frame uses the modify date, not the capture date. 1 Press to highlight the current picture in the film strip. 2 Press to navigate through the film strip. To move even faster, press and hold an arrow button.
Viewing pictures Folders—searching and viewing by folders Select and press OK. Folders in the current picture source are listed here. 1 Press to highlight the first folder in the list. 2 Press to navigate through the folders. To move even faster, press and hold an arrow button. A preview slide show plays of the pictures in the highlighted folder. 3 Press OK to display thumbnails of the pictures in the folder. For details on moving through the thumbnails, see Viewing thumbnails, page 15.
Viewing pictures People—searching and viewing by people The latest KODAK Digital Cameras let you identify people in your pictures. Select and press OK. If there are any identified people in the current picture source, they are listed here, grouped by person. 1 Press to highlight the first person in the list. 2 Press to navigate through the people. To move even faster, press and hold an arrow button. A preview picture of the highlighted person is displayed.
Viewing pictures Viewing thumbnails View the pictures on your frame as thumbnails when you’re searching for pictures (page 11). 1 Press to highlight the first thumbnail. 2 Press the arrows to navigate through the thumbnails. To move even faster, press and hold an arrow button. 3 To quickly page through the thumbnails, continue to press to highlight the slider bar. Then press . 4 Press OK to display the highlighted thumbnail at full-screen.
Viewing pictures Changing viewing modes Press the mode button to change how you display pictures on your frame. Single picture Calendar Clock Collage Press mode button Single picture ■ Each time you press the mode button, the frame advances to the next viewing mode. ■ Available viewing modes are: single picture, collage, clock, and calendar. ■ There are several styles of collage, clock, and calendar modes available. To change the style, highlight the Set Modes icon from the main control panel.
Viewing pictures Picture Finder—auto-play similar pictures Picture Finder lets you automatically play the pictures that were taken on the same day as the picture on the screen. NOTE: Make sure the time and date are set accurately on your camera or other capture device. If you modify pictures on your computer, the frame uses the modify date, not the capture date. Play similar pictures 1 While a slide show is playing, press OK to pause play and display the main control panel icons.
Viewing pictures Pausing play on a single picture ■ ■ When a slide show is playing, press OK. The slide show pauses with the current picture displayed. The main control panel appears with Play highlighted. To resume the slide show, press back or OK. Deleting pictures from your frame You can delete pictures from your frame’s internal memory but not from an inserted memory card or USB device. 1 Make sure no memory card or USB device is inserted in the frame.
3 Changing settings and more Changing frame settings The options in the Settings menu let you customize and configure your frame. to see the IMPORTANT: You may need to keep pressing the up/down arrows complete list of available options. 1 While a slide show is playing, press OK to pause play and display the main control panel icons. 2 Press to highlight 3 Press to highlight a Setting, then press OK to display the setting options.
Changing settings and more Settings To return to the previous screen, press back . Setting Options Rotate 90° clockwise (default)—rotate the current picture. Exit—return to slide show without rotating any pictures. 90° counter—rotate the current picture counterclockwise. 180° flip—rotate the current picture. Time Set the current time (see page 22). Date Set the current date (see page 22). Time On/Off Always on—the frame is always on. To turn it off, press the See Set on/off times, page 23.
Changing settings and more Setting Options Language Choose your language (see page 4). Firmware upgrade Upgrade now—load the latest version of firmware on your This setting appears at the top frame (see page 26). of the Settings list if the Exit without upgrading—return to the main menu. upgrade file (.img) is present on the frame (on an inserted memory card or flash drive, or copied into internal memory). About Check your frame model, serial number, and firmware version. www.kodak.
Changing settings and more Setting the time, date, and on/off times The first time you turn on your frame, the Time, Date, and On/Off screens each appear automatically after you select your language (see page 5). To change the settings after your frame is set up and running: 1 Press OK to pause a slide show and display the control panel icons. 2 Press to highlight NOTE: Press arrow buttons (Settings), then press OK. to highlight options and change settings. Set the time 1 Highlight Time, then press OK.
Changing settings and more Set on/off times Highlight the option you want, then press OK to activate it. Always on—frame stays on until you press the power button or unplug it. Manually set on/off time (default)—frame turns itself on and off at pre-set times. The default turns the frame on in the morning and off at night. To change the on/off times, see Manually set auto on/off times, below. Manually set auto on/off times You specify the times you want your frame to automatically turn on and off.
Changing settings and more Setting transitions between pictures Choose how long each picture is displayed and a transition style between pictures. 1 Press OK to pause a slide show and display the control panel icons. 2 Press OK. 3 Press Slower Slow Medium 1 Medium 2 24 (Transitions), then press to highlight a timing and transition option, then press OK. Slowest Fast to highlight pictures change once a day, at midnight; transition effect is a gentle motion to the left.
Changing settings and more Setting viewing modes There are several styles of clock, calendar, and collage modes available. Preview the available modes and select your choices here. 1 While a slide show is playing, press OK to pause play and display the main control panel icons. 2 Press to highlight (Set Modes), then press OK. 3 Press to highlight a mode. 4 With Clock, Calendar, or Collage highlighted, press to highlight and preview each different style.
Changing settings and more Upgrading your firmware (recommended) Firmware is the software that runs on your frame. Download and install the latest version from the Web to keep your frame up to date. Check your frame’s current firmware version Go to the About screen in the Settings menus (see Changing frame settings, page 19 and page 21). Note the firmware version on the About screen. Download the latest firmware 1 On your computer, go to www.kodak.com/go/digitalframedownloads.
Changing settings and more Changing your frame orientation Your frame is set up to display pictures in landscape orientation . To change the orientation to portrait , rotate your pictures in the Settings menu (see page 20) and then turn the frame on its side. Turn the frame Portrait Landscape Hanging your frame on the wall To hang your frame on the wall in landscape orientation, remove the stand, then use wall anchoring hardware (not included) to securely mount the frame to the wall.
Changing settings and more Maintaining your frame IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes Learn more about your frame. Order accessories. www.kodak.com/go/digitalframesupport Support for KODAK Digital Frames www.
4 Troubleshooting and support For product support, go to www.kodak.com/go/digitalframesupport. Picture frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 2). ■ Unplug the power cable for 5 seconds, then reconnect the cable. Press and hold the power button (for about 2 seconds), then release.
Troubleshooting and support Screen messages Screen message Try one or more of the following The frame cannot display the picture because the file is File is bad. (usually preceded by the file name. corrupted or it’s an unsupported file format (see page 32). For example: xxx_xxxx.JPG file is NOTE: Videos are not supported. bad) Write failed. Select another location. Error attempting to open file or directory. Error occurred while closing a file. Error invalid filename.
Troubleshooting and support Re-setting your frame after losing power If the frame loses power or you unplug it for more than a minute, the time and date setting is lost. When the power is restored and the frame turns on, you are prompted to reset the time and date (see page 5). www.kodak.
5 Appendix Digital frame specifications For more specifications, go to www.kodak.com/go/digitalframesupport. KODAK EASYSHARE P87 Digital Frame Color display 20.2 cm (8 in.) diagonal LCD 800 x 600 pixels, 4:3 aspect ratio 16.2 wide x 12.2 cm wide (6.4 x 4.8 in.) viewable area Internal storage capacity (internal memory) 128 MB (store up to 1000 pictures. Actual storage capacity will vary based on picture content) Power AC adapter 100–240V AC 50/60 Hz AC adapter, 5V DC @ 1.
Appendix KODAK EASYSHARE P87 Digital Frame Size 22.1 x 16.7 x 2.3 cm (8.7 x 6.6 x 0.9 in.) Weight 377 g (0.8 lb.) - includes frame, stand Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures.
Appendix Additional care and maintenance ■ Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. ■ Service agreements are available in some countries. Contact a dealer of KODAK Products for more information. ■ For digital frame disposal or recycling information, contact your local authorities.
Appendix replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control.
Appendix Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Appendix Canadian DOC statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Appendix VCCI Class B China RoHS 38 www.kodak.
1 Index A about, frame, 21 AC adapter, 2, 33 all pictures, searching, 11 appendix, 32 arrow buttons, 3 attaching power cable, 2 stand, 1 auto enhancements, setting, 20 automatic on/off, setting, 23 picture finder, 17 a-z, play alphabetically, 20 B back button, 3 brightness, 20 button, mode, 16 buttons, i C cable, power, connecting, 2 calendar, viewing mode, 16 camera, copying pictures from, 9 card, memory copying from, 9 inserting, 6 slot, i supported types, 33 viewing pictures from, 10 changing settings,
Index viewing pictures from, 10 folders, searching by, 13 frame, picture hanging on wall, 27 specifications, 32 troubleshooting, 29 turn on/off, 5 mode button, i, 3 changing, 16 setting styles, 25 H help frame, 29 support URLs, 28 troubleshooting and support, 29 O OK button, 3 oldest to newest, display, 20 on/off button, 5 on/off, energy saver, 23 order, display by, 20 orientation, changing, 27 I icons, control panel, ii installing flash drive, 7 memory cards, 6 USB device, 7 internal memory capacity,
Index recycling, disposal, 34 regulatory compliance, 36 reset frame, 29 reset time after losing power, 31 rotate pictures, 20 S safety information, 33 screen cleaning, 28, 34 error messages, 30 searching for pictures, 11—14 set modes icon, 25 settings, changing, 19—21 about auto enhancements brightness date display picture order by firmware upgrade language picture book backgrounds rotate time time on/off specifications, frame, 32 stand, attaching, 1 storage capacity, internal memory, 32 support, 28 time,
