Owner's manual

Basic Functions
20 www.kodak.com/go/aiosupport
Scanning
Before scanning, make sure that the printer is connected to your computer with a
USB
2.0 cable. wireless network, or Ethernet network/cable.
To scan a document or picture:
1 Place the original(s) in the automatic document feeder or on the scanner glass.
IMPORTANT: Do not load photographs, cards, or any paper stock heavier than
24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF.
2 Select Scan.
3 Select one of the following destinations for your scan:
■ Computer
■ Memory Card
■ USB Flash Drive
■ Email*
■ Network Folder*
4 Press Start Black to make a grayscale scan, or press Start Color to make a
color scan.
For more detailed information about scanning, see the Extended User Guide at
www.kodak.com/go/hero6_1manuals.
*Use the KODAK Online Printer Management Tool to set up these destinations; see the Extended
User Guide.