User Manual

KODAK PIXPRO ORBIT360 4K
360° VR CAMERA
TIPS & BEST PRACTICES FOR USING YOUR
KODAK PIXPRO ORBIT360 4K VR CAMERA
We’re so pleased you have chosen the KODAK PIXPRO ORBIT360
4K VR Camera! You’re about to see and experience the world in a
whole new light and take your interactive videos to brand new heights.
Now that you are ready to start using the ORBIT360 4K VR camera,
we want to provide you with some quick and helpful tips that should
ensure your 360° photos and videos turn out in the best way possible!
Tip #1: Check your Camera’s Firmware
Visit the support section on kodakpixpro.com and check the
latest firmware version available. If your camera firmware needs
updating, download and install the latest firmware as soon as
possible to make your experience the best possible.
Getting Started with the KODAK PIXPRO ORBIT360 4K
© 2017 JK Imaging Ltd. The Kodak trademark logo and trade dress are used under license from Eastman Kodak Company. All other logos, products or company names that are
referred to on this card are trade names, trademarks or registered trademarks of their holders. The holders are not affiliated with JK Imaging Ltd., our products or our website.
Tip #2: Shooting Positions Front/Back
Tip #3: Check your Shooting Modes
Tip #4: Check Your Resolution
Tip #5: Internal Stitching vs. External Stitching
Tip #6: Use your PIXPRO iOS/ANDROID APP
Tip #7: Remote Control
Tip #8: Customer Support
The best way to hold your ORBIT360 4K is front to back.
Position the front lens forward and use it as the central focus
of your 360° video or photo.
The OBRIT360 4K factory setting is in 360°/VR video mode
at 24fps. Always make sure you have set your desired shooting
mode before recording videos or taking photos.
Make sure to check your camera’s video resolution before
shooting. The highest shooting resolution is 4K.
Example: 3840 x 1920, 15fps (Stitched)
3840 x 1920, 24fps (Lens A & B)
1920 x 960, 30fps (Stitched)
The PIXPRO 360 Remote Viewer APP can be useful for previewing
your shots or controlling the shooting modes and various settings on
your ORBIT360 4K Camera. The APP will also allow you to upload
360° photos and videos on the go to FACEBOOK™ & 360° videos
to YOUTUBE™
kodakpixpro.com | #kodakpixpro | #orbit3604K | #360Moment
Shooting at 15fps is for internal camera stitching and a 360° ready
file. Shooting at 24fps allows for external stitching and editing in
our PIXPRO 360 VR Suite.
Your remote control options come in handy when you don’t want to
use your smart device or use the camera’s buttons and interface.
Utilize our helpful customer support team via email or phone.
[e-mail] / U.S. Toll Free [phone]
Visit our KODAK PIXPRO Community Forum for more helpful
information and tips at kodakpixpro.com under the Support
section of the site.