User Manual

11
Mounting / Removing Lens Covers:
Removing lens covers:
Turn the clear, protective lens cover counter clockwise following the illustrations
below until it separates from the ORBIT360 4K/4KVR360.
Attaching lens covers:
Turn the lens covers clockwise and irmly tighten the lens covers as illustrated
below.
The lens covers protect the camera's glass lenses from being permanently damaged and are dustproof, shockproof and splash proof. Using the lens covers
when taking a photo/shooting a video will not aect the photo image/video quality. Keeping the clear, prootective lens covers on the ORBIT360 4K/4KVR360
is essential to being able to use the internal stitch feature of the camera. If you do not use the clear lens covers, you will not be able to stitch photo/videos
and render iles for sharing.
Before mounting the clear lens covers, make sure the permanent glass lens surfaces are clean and dry. Always use a clean, lint-free, dry cloth to clean the
camera's lenses before shooting or recording so any foreign particles it will not aect the photo or video quality.
When the ORBIT360 4K/4KVR360 is exposed to extreme temperature dierences, condensation may form inside the camera's lens covers. If this happens,
remove the lens covers, clean with a soft, dry, lint-free cloth and reinstall the lens covers.
If the ORBIT360 4K/4KVR360 will not be used for a long period of time or during transportation, always put the black rubber protective covers on (as shown
in the image below):