User Manual

56
Message Description Recommended Action
The camera is set to "Mass Storage" device and is connecting to the computer via
USB.
No action required.
The camera is set to "Webcam" and is connecting to the computer via USB. No action required.
Connecting to a HDMI device. No action required.
A warning for low battery before the camera will shut down automatically.

Charge or replace with a new battery.
Updating irmware.
No action required. The camera will
turn o automatically after the update is
complete.
Battery temperature is too high. The product will automatically shut down.
Remove the battery carefully when the
product is shut down. The battery can be
used again after cooling down.