User Manual

69
3. Place the camera into the stationary and mounted half of the Waterproof Housing. Align the red mount marks on the front half enclosure to the mounted,
ixed half of the Waterproof Housing and turn the front half of the Waterproof Housing enclosure in the direction of the arrow on the housing. When you hear a
"clicking" sound, the front and back covers of the Waterproof Housing have been properly closed and are fully sealed.
Alignment Marks
4. Use the supplied Hex Wrench tool to loosen the clear plastic mini remote control enclosure on the Waterproof Housing. Open the mini remote control
enclosure cover and insert the Mini BLUETOOTH Remote Control inside. Then use the Hex Wrench tool to carefully and fully tighten the screw.
5. To attach the Waterproof Housing Mount with other PIXPRO accessories like the selie stick, use the included accessories tool to fully and carefully tighten the
set screw.