User Manual
6
Connecting the Camera with Your Computer
Downloading and Installing the Software:
Download the "PIXPRO 360 VR Suite" software installation package from our KODAK PIXPRO oicial website and
install it on your computer by following the prompts on the interface.
Americas
https://kodakpixpro.com/Americas/support/downloads/
Europe
https://kodakpixpro.com/Europe/support/downloads/
After successful installation, this icon will appear on your desktop.
Establishing a Connection:
Wi-Fi Connections (supports: Wi-Fi Control, Download & Playback)
1. Camera: Check SSID and password (initial factory password: 12345678) indicated on the label in the battery
compartment of the camera. In the main interface of the camera, press the
button to switch to Wi-Fi mode.
2. Computer: To enable Wi-Fi mode, the camera will automatically search for nearby Wi-Fi hotspots. Select the
camera’s SSID and input your password. When connected via Wi-Fi, you will be able to double-click the
software icon
on the desktop of your computer to open and start it.
When the Wi-Fi connection password is altered using your smart device, the connected password in the
computer will simultaneously change. Choose to enter a new updated password if desired.
If you forget the Wi-Fi connection password, you can use the reset function on the camera to reset it to the
factory default password: 12345678.
Since there are dierent network names (SSID) for dierent types of products, please check the SSID label inside
the camera's battery compartment or refer to the following instructions before connecting.
SP360: PIXPROSP360_XXXX
SP360 4K: PIXPROSP3604K_XXXX
ORBIT360/4KVR360: PIXPROORBIT360_XXXX /PIXPRO4KVR360_KXXXX
1