User Manual

58
Flat Adhesive Mount-A: For sticking onto a skateboard or other lat
objects
Installation Method:
There are two types of adhesive mounts: lat and curved. You should select your desired adhesive mount based on the shape of the object you intend to mount
your camera to.
Both types can be installed in the same way:
1. Assemble the standard housing ( 58).
2. Fasten the standard housing and install adhesive mounts according to the diagrams below and use the setscrew to tighten.
3. Stick the double-sided adhesive at the bottom of the adhesive mount to the object of your choice.
The double-sided adhesive is disposable. It should always be replaced with a new one after being peeled o.
Curved Adhesive Mount-A: For sticking onto a helmet or other
curved objects
Double-Sided Adhesive