KODAK EASYSHARE Digital Frame Extended user guide P725/P825 www.kodak.com For help with your digital frame, www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2009 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company.
Product features Top—buttons and controls Delete from frame Copy to frame Play speed/transition Slow w/Wipe Medium w/Pan Zoom Fast w/Fade www.kodak.
Side—power and connectors Power USB connector Memory card slot SD/SDHC/MMC/MS/XD Memory card slot MS/MS Pro Duo Stand DC-in* * See Attaching the power cable, page 1 and Attaching the stand, page 2. ii www.kodak.
Table of contents 1 1 Getting started ......................................................................................1 Attaching the power cable ............................................................................ 1 Attaching the stand....................................................................................... 2 Turning your frame on and off ....................................................................... 2 Inserting a memory card...........................................
1 Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing your pictures couldn’t be simpler! Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 1 www.kodak.
Getting started Attaching the stand 2 1 1 Snap the stand onto the frame. 2 Route the power cord through the cutout in the stand. Turning your frame on and off Power button - press and hold (for about 2 seconds), then release NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted. www.kodak.
Getting started Inserting a memory card To insert a card, push it firmly into the slot until it clicks and stops. To remove a card, pull it out of the slot. Top slot*: SECURE DIGITAL/SECURE DIGITAL High Capacity (SD/SDHC) MMC (MULTIMEDIA Card) XD MS (MEMORY STICK) Bottom slot: MS/MS Pro Duo (MEMORY STICK) *IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove.
2 Viewing pictures Pictures play from the frame’s internal memory when no card or USB device is inserted. Pictures play from a memory card or USB device when one is inserted in the frame. NOTE: Your frame may contain pre-loaded sample pictures, which play only when there are no other pictures loaded (from a memory card, USB device, or internal memory). Sample pictures may not be deleted. Viewing pictures from internal memory Turn on the frame.
Viewing pictures Navigating through your pictures Press the arrow buttons to navigate through your pictures. Previous picture Next picture Play/Pause Navigation and play buttons To move more quickly through your pictures, press and hold an arrow button. Previous picture—Go to the previous picture. Play/Pause—Start or pause play. Next picture—Go to the next picture. 5 www.kodak.
Viewing pictures Changing play speed, transitions, and order Move the sliders to change the setting. Play speed/transition Play order Play speed and transition Change how long each picture stays on the screen and the type of transition between pictures. Slow—pictures change every 60 seconds, with wipe transition. Medium (default)—pictures change every 10 seconds, with pan and zoom transition. Fast—pictures change every 5 seconds, with fade transition.
3 Doing more with your frame Deleting pictures from the frame You can delete pictures from your frame’s internal memory, but not from a memory card or USB device. 1 Remove a memory card or USB device from the frame, if inserted. 2 While pictures are playing from internal memory, press the Delete button. 3 Select the pictures to delete: ■ To delete the currently displayed picture: Press the Next arrow button once to highlight Delete single Delete all Delete single Exit delete ■ .
Doing more with your frame Copying pictures to internal memory Copy pictures from a memory card or USB device into your frame’s internal memory. Copying to a memory card or USB device is not supported. CAUTION: Removing a card or disconnecting a device while copying may damage your card, pictures, or device. 1 Insert a memory card or USB device (flash drive, card reader, hard drive). See page 3. The pictures start playing. 2 Press the Copy button. The copy screen shows where you are copying from.
Doing more with your frame Upgrading your firmware (recommended) Firmware is the software that runs on your frame. Download and install the latest version from the Web to keep your frame up to date. Check your frame’s current firmware version ■ Turn your frame on. Press the Power and the Next buttons at the same time and hold for 5 seconds. Note the firmware version listed on the About screen. Download the latest firmware 1 On your computer, go to www.kodak.com/go/digitalframedownloads.
Doing more with your frame Maintaining your frame IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. www.kodak.
4 Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport, select your frame model, and select Step-by-Step Solutions & Repair. Learning more about your frame www.kodak.com/go/digitalframes Learn more about your frame www.kodak.com/go/digitalframesupport Interactive tutorials Frequently asked questions Downloads Product registration Picture frame problems If... Try one or more of the following Frame does not turn on.
Troubleshooting and support If... Try one or more of the following Nothing happens when ■ Insert a certified SD/SDHC/MMC/XD Card, with images, into the upper designated card slot, then push to seat it (see page 3). a memory card or USB device is connected. ■ Insert a certified MS/MS Pro Duo Card, with images, into the lower designated card slot only, then push to seat it (see page 3). NOTE: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove.
Troubleshooting and support Identifying graphic messages Graphics appear on the screen to let you know what’s happening with your pictures and your frame. Graphic Description Internal memory—the current picture source is the frame’s internal memory. Memory card—the current picture source is an inserted memory card. USB device—the current picture source is a USB flash drive or other USB device. Pause—picture play is paused. Copy—appears when you press the Copy button (see page 8).
Troubleshooting and support Identifying error messages Error icon and meaning Try one or more of the following The card/device is empty. ■ Insert a different card or device with pictures (see The card/device is unreadable or corrupt. page 3). File is corrupted or it’s an ■ See page 15 for supported file formats. unsupported file format. Internal memory is full, unable to copy. ■ Delete pictures from internal memory (see page 7).
5 Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. KODAK EASYSHARE P725/P825 Digital Frames Color display P725 17.8 cm (7 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 14.2 x 10.6 cm (5.6 x 4.2 in.) active area P825 20.3 cm (8 in.) diagonal digital LCD, 800 x 600 pixels, 4:3 aspect ratio, 16.2 x 12.2 cm (6.4 x 4.8 in.
Appendix KODAK EASYSHARE P725/P825 Digital Frames Size P725: 17.3 x 14.2 x 6.4 cm (6.8 x 5.6 x 2.5 in.) P825: 20.3 x 16.5 x 6.6 cm (8 x 6.5 x 2.6 in.) Weight P725: 441 gm (1.0 lb.) includes frame, stand, and AC adapter P825: 599 gm (1.3 lb.) includes frame, stand, and AC adapter Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel.
Appendix Additional care and maintenance ■ To clean the frame or screen, use a soft, lint-free cloth dampened with lens cleaning solution or a water-based cleaning solution. Use light pressure. ■ Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements are available in some countries. Contact a dealer of Kodak products for more information. ■ For digital frame disposal or recycling information, contact your local authorities.
Appendix replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control.
Appendix Outside the United States and Canada In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
Appendix Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Hereby, Eastman Kodak Company declares that this Kodak Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Appendix Australian C-Tick N137 Waste Electrical and Electronic Equipment labeling In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment at a collection facility established for this purpose (separate from municipal waste). For more information, contact your retailer, collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. Product weight with adapter and stand: P725, 441 gm.
Appendix China RoHS www.kodak.
1 Index A AC adapter attaching, 1 safety information, 16 specifications, 15 appendix, 15 B By date play order, 6 C cable power, connecting, 1 USB, connecting, 3 card, memory inserting, 3 slot, ii supported types, 15 viewing pictures from, 4 cleaning frame, 10, 17 copying to internal memory, 8 D delete pictures, 7 disposal, recycling, 17 download firmware, 9 duration, changing, 6 E error icons, 14 23 F file formats, supported, 15 firmware, upgrading, 9 flash drive connecting, 3 viewing pictures from, 4 fr
Index L locked screen, reset, 11 M memory card.