PD-450/450W/480/480W User Guide Please read this guide before using the printer
Safety Precautions Safety Precautions Denotes the possibility of serious injury or death • Please keep you away at least 20cm distance from printer when printing. • Use only recommended power sources. • Unplug the power cord when the product is not in use. • Do not attempt to disassemble, alter, or apply heat to the product.
Package Contents Consumable (Separate Purchase) Before use, make sure the following items are included in the package. If anything is missing, contact the retailer where you purchased the printer. Before printing, purchase an Ink Cartridge / Paper Set Cut line Ink Sheets Lever Photo Printer Dock (PD-450/480) Paper Cassette Photo Paper Ink Cartridge Consumable Set Model Power Adapter Power Cord PHC 80 PHC 120 * Specifications or design may change without notice for product optimization.
Installing Photo Printer Dock Inserting Cartridge Minimum 5cm (2 in.) Minimum 20cm (8 in.) 1. Open the cartridge cover. Minimum 5cm (2 in.) Minimum 5cm (2 in.) -. For accessories available for sale, photo paper is provided for the amount of ink cartridge and print number. Choose the right place to put the Photo Printer Dock. Place the printer on a table or other flat, stable surface. Do not place the printer on an unstable or tilted surface. - Leave a minimum of 5 cm (2 in.
Inserting Paper Cassette Installing the Application 1. iPhone, iPad and iPod 1) Go to the App Store in the device. 2) Search for “KODAK Printer Dock” 3) Install the application. 1. Open the cassette cover. 2. Insert the paper facing the shiny side up. You can insert up to 20 sheets. Inserting over 21 sheets may cause a malfunction. Avoid touching the coated paper with your hands as it may affect the photo quality. KODAK Printer Dock 2. Android Phones and Tablets 1) Go to the Play Store in the device.
Connecting to the Printer and Printing Printing photos using the dock Connecting to the Printer and Printing Printing photos using a USB cable 1) Turn on the printer by pressing the power button on the top left corner. Connect the smart phone to the dock after turning the printer on. 2) Push the 1Touch button on the left bottom corner of the printer. App will run automatically. In case of Android phone, App can be launched when it is docked.
Connecting to the Printer and Printing USB Flash Drive/Digital Camera Printing photos using a WiFi (PD-450W/480W model only)* MAC 1) Turn on the printer by pressing the power button on the top left corner. Turn WiFi on in your smartphone. 3) App Launch. Printing with USB flash drive 1. Turn on the printer. 2. Connect your device to the printer. 3. Insert your flash drive to the USB port. 4. Select the USB menu from the printer app. 5. Select your image and print.
Charge your Device Charging your device Power and LED Status Indicators Power and LED status indicators 1. Using the dock LED Status Docking to the printer will charge your device. 2. Using a USB cable Status LED Power on Yellow LED Power off (2 seconds) None Printing Yellow LED blinking Firmware Update Connecting a USB cable to the USB port, which is located on the left side of the printer will charge your device.
Troubleshooting Product Specification Troubleshoot Indication Paper jam Product Specification Solution - Turn the printer off and on. The printer will automatically eject the paper. If problem is not solved, please contact Customer Support. Model WiFi Docking Low resolution - The resolution of the original photo may affect print quality. We recommend photo with 1280x2448 pixels and above. Printer not printing - Turn the printer off and on. - Check if the cartridge is inserted properly.
Part Name Part Name 1Touch App& Print Button Dock Connector Dock Connector DC power slot Power button USB Port Paper path slot Micro 5 Pin* Paper Tray Slot Paper Exit Door * Do not attempt using the Micro 5 Pin port. This port is designed for factory use.
FCC REQUIREMENTS PART 15 Caution: Any changes or modifications in construction of this device which are not expressly approved by the responsible for compliance could void the user's authority to operate the NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interface, and 2. This device must accept any interference received, including interference that may cause undesired operation.
www.kodakphotoprinter.
